Thursday, November 17, 2022
HomeFactsHow Are Tile Roofs Attached In Florida

How Are Tile Roofs Attached In Florida

Battens Causing Water Backup

Tile Roof Installation in Punta Gorda, FL

When tile roof systems are installed on steep roof structures, 1×2 wood baton strips are utilized to help hold the tiles in place during installation and provide a walkable surface. Some roofers use batons on all roofs because it keeps the tiles off of inferior underlayments. On roof pitches under 6:12, there isnt enough slope to prevent the water from getting behind the batons and find the thousands of underlayment nail holes used to hold down the batons. It is also acceptable to nail down batons and then screw the tiles into the batons. This does not provide the intended wind uplift.

How Long Does A Built

Built-up roofing, which is also known as BUR, is the most popular roofing material found on low-slope roofs. The roof is built using an alternating layered style. Layers of asphalt and reinforcing fabric are alternated, and then a top layer of aggregate is used. This results in a continuous sealed surface.

The lifespan of a built-up roof depends on several factors such as the materials used and the climate conditions. However, the typical lifespan ranges from 15 to 30 years. This roofing type is good for the Florida climate as the composition is better suited to warmer conditions than colder ones.

The aggregate top layer provides UV resistance, which is great for facing the intense Florida sun. Additionally, this layer provides fire resistance. These properties contribute to a longer lifespan provided the roof is adequately cared for.

The biggest downside of built-up roofs is the installation process. Not only is it slow, but it also involves hazardous fumes, which have detrimental effects on the human body. Note that some types are susceptible to water and wind damage, therefore, its important to check with the manufacturer/installer so you can avoid those types with the kind of climate Florida has.

Turn To The Experts At Dr Martineau

Every homeowner knows that a properly installed roof is one of the most important investments that can be made when buying or renovating a home. Thankfully, residential roofing is one of D.R. Martineaus many areas of expertise. Whether making a small roof repair or installing a brand new roof, we have you covered.

Recommended Reading: Hydrostop Cost Per Square Foot

The Pros And Cons Of Tile Roofing In Florida

While tile isnt the most common roofing material for homes in Florida, it is more popular here than in many other regions of the country. Tile can be a stylish addition to your home, and also one of the longest lasting roofing materials available. There are upsides to having a tile roof, but there are also some drawbacks, mostly dealing with higher cost and difficult installation, that you may want to consider before making such a large investment.

Tile roofs are as customizable as any other roofing material when it comes to shape, color and material. So, whether its concrete, clay or ceramic, here are the pros and cons of choosing a tile roof for your Florida home.

What Is Tile Roof Underlayment

Tile Roof

Underlayment is a membrane applied directly to the tile roof deck between the tile and the roof sheathing that acts as an extra layer protecting your roof from water, should severe weather damage your tile roof.

While a tile roof by its very nature is water-repellent, it is not a watertight barrier because it isnt sealed at all corners when laid. Thats why it needs a roofing underlayment to serve as an additional water barrier.

You May Like: How Much Shingle Roof Cost

Choosing To Install New Rooftop Solar Panels On An Old Roof

Its a smart move to install a roof and a solar array at the same time. A mismatch here can throw things completely out of kilter.

You can expect fully 20 years of service from a solid solar array so why sell yourself short and install this on a roof with less than a decade left to run?

Think closely about this before rashly jumping in resulting in false economy when you need not only a new roof but also new solar panels.

The Need To Know About Solar Panels On Roofs

Solar panels on your roof are a surefire way of generating free sustainable energy and they make a wise bet in any states with plenty of sunshine.

While solar panels offer clean energy, there are a number of flashpoints to watch out for, particularly during the installation process.

After all its senseless trying to accomplish some good with a solar array on your roof if you end up with a system that causes leaks and damage. Our roofers see shoddy solar installations throughout Northeast Florida almost daily.

Read on to see the most common problems with solar panels on roofs and how to avoid them

After that, well glance briefly at what type of roofing material works best if you want to enjoy a fine solar array.

Also Check: Travel Trailer Roof Repair Kits

What Method Is The Best For Attaching Roof Tiles

Are you familiar with the options for attaching roof tiles?

Do you like the look of tile roofing?

Are you considering a tile roof?

Tile roofing can be a great choice especially if you live in Florida or the Southwest. This timeless roofing solution offers longevity, style, and resistance to fire and rot, while leaving a positive environmental impact.

Determining the best method to use when attaching the roof tiles does require some research though.

Here are FIVE of the most common methods to consider:

  • Mortar Down Application Uses a mixture of building and sharp sand with cement mix. This method has been largely abandoned after Hurricane Andrew came through too many problems with a mortar set installation and high-winds.
  • Double Nail Down Application Uses two ring shank nails. This method has been disappearing from the roofing industry.
  • Screw Down Application Uses one or two screws depending on the wind speed. These screws can also be upgraded to stainless steel. This method is by far the most frequently used method of installing roof tiles.
  • Single Component Foam and Two Component Foam Adhesive Uses foam adhesive. This method is the best way to install a tile roof as it is less abusive on your underlayment.
  • Hybrid Roofing System Uses screws and foam. Recently Eagle Roof tile received data on the Hybrid Roofing System, it holds up to the wind very well. This system has a good middle of the road price point!
  • Work With the Best

    Our Top Priority Is To Provide Excellent Quality Installations Repairs And Replacements And An Even Better Experience For Our Customers

    Breaking The Stigma Of Tile Roof Cleaning One Roof At A Time. (Florida Stlye)°[HD]

    Our full-service residential roofing company specializes in installing, repairing, and replacing tile roofs, metal roofs, shingle roofs, and more! We also offer flat roof systems, modified roofing, architectural sheet metal, flashing work, chimney repair, and soffit, fascia, siding, and gutter installation.

    Don’t Miss: How Much Is A New Roof In California

    Tiles Sliding Off Roof

    Tile roofs with a #30lb.felt paper base and a #90lb. hot asphalt installed underlayment system is installed and the tiles adhered using mortar add extra weight to the system. During our hot months the roof temperature rises above 160 degrees softening up the asphalt adhesive. With the extra tile weight without fasteners to hold the tiles to the deck cause the roof system to slide, especially on high-pitched roofs. This system is sliding as evident by looking at the perimeter edge. There is no way to repair this issue. However, it is a sign that replacement is near.

    Are There Other Solar Options Besides Rooftop Panels

    Yes, you could consider investing in ground-mounted solar panels. These are effective at collecting energy from the sun, although theyre not always preferred for a variety of reasons. First, they require a considerable amount of ground space, which means you might have to sacrifice other home features, like a pool or a screened-in patio that will bring you enjoyment and increase your homes value to make room for the panels. Additionally, if you are part of a homeowners association, there may be restrictions about placing solar panels in your yard because of how they impact the look of the neighborhood. Finally, ground-mounted panels take more time to install than rooftop installation because they require underground wiring and digging to stabilize panels. This additional time can increase your overall installation cost.

    Whether you decide that roof-mounted panels or a ground-mounted setup is best for your home, one thing is for certain. Youll be lowering your monthly energy bills, increasing your homes value, and reducing your carbon footprint, for a very foward-thinking and forward-reaching investment indeed.

    Find today’s best prices for your home improvement project.

    Read Also: Roof Cost California

    Ell Flashing Not Sealed Properly

    Ell flashing bridges the transition from the roofs surface and a wall or upright surface such as a curb. Ell flashing has not been sealed properly and the shingles are peeling back from the flashing allowing seepage. This can be corrected by removing the area and installing mastic sealant correctly. A new membrane may need to be installed in this area. Also, if the ell flashing cannot be cleaned or has too many old fastener holes in it, the entire flashing detail area may need to be replaced.

    What Are Terracotta Roof Tiles

    Tile Roof

    The word terracotta literally means “baked earth.” Terracotta roof tiles are made from hard fired clay. Terracotta roofing tiles are synonymous with clay roofing tiles. Clay roof tiles are also sometimes referred to as ceramic roof tiles.

    That covers the primary materials of construction when it comes to roofing tiles.

    Before we look at some of the more common shapes of roof tiles in use today…

    Check out the tile roof in this video.

    Read Also: What Size Nails For 7 16 Osb Wall Sheathing

    What We Work With


    Roof shingles are the most popular choice for residential roof jobs. Asphalt shingles are made of fiberglass that is sandwiched between asphalt and ceramic granules. There are several types of roof shingles in several colors and thicknesses. We use architectural shingles and three-tab shingles, designed for high winds and the glaring sun that can only be found here in the Sunshine State! Contact us to find out more about types of roof shingles.


    Roof Tile is a beautiful and durable roofing material which can last upwards of 100 years. For areas like Florida that experience hot weather, rain, and humidity, tile is an ideal option since it is impervious to rot, insect damage, and it can withstand hail, high winds, and fire. There are several different types of roof tile types to choose from when you’re replacing your roof tiles.


    This type of roof material is an attractive option because of its lifetime protection for your home paired with energy savings and beauty. It requires minimal maintenance and is a recommended roofing material by FEMA for homes in areas that are prone to hurricanes and high winds. This material gives your home a lot more value. In addition, we make installing a metal roof easy! Contact us to find out more about different types of metal roofing.


    How Long Does A Metal Roof Last On Mobiles In Florida

    Metal roof longevity on mobile homes is like its longevity on regular homes. In fact, as mobile homes have a lifespan of 30 to 50 years, it is not uncommon for metal roofs to last for their lifetimes.

    As always, this depends on several factors including the type of metal used and its distinct properties. Also, the concerns with mobile homes tend to surround the materials used in the homes such as the wood used for floorboards.

    Aluminum is a great choice for mobile homes as the salty air and consistent rainfall can pose a problem for the homes contents and components if it were to get inside. Aluminum roofing is more resistant to the rain and salty air than some other metals and, therefore, provides a great protective layer.

    Though metal roofs do not require frequent inspection and maintenance, ensure you get it done from time to time to verify the integrity of your roof.

    Recommended Reading: How To Build An Overhang

    Benefits Of Roofing Batten Systems

    Not every roof uses a batten system for example a membrane system does not use a batten system. Membrane roofing is a flat roofing system. You do not have to use a batten roofing system under most building codes. In some cases, it is necessary, but in most cases using batten on your roof is a choice to gain the benefits of using this system.

    There are primarily two options for roofing, a direct to deck system or a roof batten system. The direct to deck system attaches the outside materials like shingles or panels directly to the deck of the roof. There are some situations where a roof batten system must be used, like in cases where the HVAC system is on the roof, or in the case of concrete tiles it is best to use a batten system.

    There are clear benefits of using batten roofing system over a direct to deck system:

    There are a lot of things that a batten roof system can do that a direct deck roof cannot. It can be a more energy efficient option that reduces some of the common roofing problems. The fact that less fasteners are used should be a big enough selling point.

    Each fastener that penetrates the underlayment and the deck is a risk factor that moisture will get into the roof.9 times out of 10 a leak can be traced to a fastener point. With a batten roof there is less penetration, so there is less risk.

    What Is The Best Roof Design For Hurricanes

    Solar Panels on Stone Coated Metal Roofs in Florida

    The best roof shape to get the cheapest home insurance rates is a hip roof because they have fewer sharp corners and lower-incline slopes. Because of these features, a house with a hip roof will generally perform better in a windstorm, especially in a High-Velocity Wind Zone like southern Florida. In fact, a hip roof can reduce your homeowners insurance premiums by close to 32%.

    Don’t Miss: Roof Replacement Cost In California

    Loose Laid Clay Tile Roofs

    For standard concrete tiles with lugs set on battens, building codes still allow tiles to be laid loose at slopes less than 5:12 .

    Watch out: Loose-laid clay roofing tiles are not allowed, however, in snow regions, areas subject to high winds, or with tiles weighing less than 9 pounds per square foot installed.

    Why Tile Roofing Is The Choice Of Roofing In Florida

    More new homes are constructed and re-roofed with tile roofing than ever before. There are many reasons that tile is the roofing material of choice for homeowners interested in investing in their home. When you choose an experienced tile roofing company for your new roof, theyll install a roof that will protect your home for decades and look great while doing so.

    Also Check: Skylight Metal Roof

    Why Are Battens A Great Option For Any Roof

    Adding battens to your roofing system can add cost but that additional cost can be largely recouped with the energy savings. A batten roof can last longer, be more durable, deliver a higher level of energy efficiency.

    In some roofing options like tile roofing, battens are a must to ensure tiles are uniformly installed and excess overhangs which can invite water damage are not present. Batten roofing is a great option for re-roofing.

    It is also a great option if you plan on installing solar panels on the roof down the road. Solar panels can be a risk to direct deck roofing systems. Solar panel installation on a batten roof means that the deck and underlayment is protected from penetration.

    Battens are almost always used on modern metal roofs. If you want to add a metal roof to your structure, metal battens will be a part of the project. In the case of metal roofs getting the longevity out of them relies heavily on the batten placement.

    How Long Does A Metal Roof Last In Florida

    A Look at Barrel Tile Roof Life Expectancy

    Metal roofing is an attractive option as it provides a durable, energy efficient solution that does not require much maintenance. Furthermore, there are numerous material options, which include zinc, aluminum, tin, galvanized steel, or copper. Once installed well, metal roofs have one of the higher longevity statistics as they can last between 40 and 70 years. This applies even when they face wind gusts of up to 140 miles per hour. To ensure you are getting quality metal, it is recommended that you use the ones that are both tested and labeled by FM Global, UL, or an equivalent entity.

    Metal roofing is advantageous in a state like Florida as some of its properties are perfect for the harsh climate.

    First, there is the durability. Many metals are corrosion resistant and they dont crack. This means certain factors, like tree debris, are not as dangerous to these roofs as they are to tile roofs. Some metal roofs are also impact resistant, which is great when your roof is susceptible to various impact sources such as random objects brought along by hurricane breeze.

    Second, there is the safety factor. As stated before, Florida has an unusually high lightning density. One of the huge downsides of this is the sparks created that can result in fires being started. Metals are not conducive to electricity conduction and, therefore, do not spark and/or ignite into flames.

    Read Also: Should I Replace The Screws On My Metal Roof

    Your Home May Need Reinforcements And Adjustments

    Tiles are much heavier compared to most other roofing materials. This is why youll need to have your home evaluated to ensure it can support such a roof. Before installing a new tile roof, your home may require some adjustments.

    Depending on your propertys design and foundation, you might need to strengthen your braces to make sure that your new roof has enough structural support. This process isnt free. The cost will add to the overall price of installing a tile roof on your Florida property.


    Most Popular