How Much To Pressure Wash A Roof

Pressure Washing Concrete Prices

A simple pressure washing of concrete runs from $0.08 to $0.20 per square foot. It goes up from thereif the pavement is greasy and requires power washing plus a concrete detergent, it will cost $0.25 to $0.35 per square foot. The concrete detergent breaks up the dirt, grease, and oil and makes the pressure wash easier and faster. To clean your concrete curbs, it costs $0.25 to $0.60 per linear foot because it requires more fine-tune cleaning with a turbo nozzle.

House Washing/roof Cleaning Costs

Soft washing is the absolute preferred method when cleaning sensitive materials such as Vinyl Siding, Hardie Board Siding and Roofing materials.

Soft washing is a method of pressure washing that eliminates the use of high pressure typically associated with pressure washers. This method either uses low pressure 12volt pumps or a down streamer that can be used with a pressure washer. Soft washing typically uses under 500 psi and is very safe for your home.

Soft washing a house removes all organic growth, cobwebs and dirt material from surfaces. The cost to soft wash a house typically ranges between $0.12 and $0.25 cents per square foot with an average cost of about $0.18 cents per square foot. The average U.S. home size is approximately 2400 square feet making the average home soft washing cost roughly $432.00.

House Soft Washing uses a 1%-2% sodium hypochlorite solutions along with a professional soap mix to clean which usually includes the exterior cleaning of the entire home from the roof line down to the foundation including all attached garages, porches, soffit, facia and gutters.

Roof cleaning using the soft washing technique is the recommended method by all major shingle manufactures. Roof cleaning is used to remove organic growth from the roofing shingles. This organic growth can be in the form of gloeocapsa magma or moss. This algae feeds on the limestone in asphalt shingles and can shorten the life span of your roof, as well as having an unappealing curb appeal.

Soft Wash Roof Cleaning Cost

The average cost for a soft wash cleaning ranges from $0.30 to $0.75 per square foot. The soft wash technique is becoming more popular with homeowners around the world due to its in-depth approach. It is quite similar to a pressure washing clean but is extremely low pressure and involves using chemicals, bleach, soap, and water to clean. For a typical soft wash, a diluted bleach solution is first applied, killing any moss, lichens, or algae, as well as cleaning the roof of bacteria and killing most everything in sight. Then, it is rinsed off with water.

Recommended Reading: Are Steel Roofs Cheaper Than Shingles

Can I Pressure Wash My Metal Roof By Myself

There is a reason that many renters and owners turn to professionals for their first roof-cleaning. While some dedicated DIYers balk at the prospect of hiring someone to work on their home, many readers remain cautious about climbing the ladder in the first place.

Safety is always the top priority, but as long as you follow instructions carefully, there is nothing to fear but fear itself. Read on to find out how to clean your metal roof as safely and efficiently as possible.

The Bottom Line On Pressure Washing A Roof

Many homeowners choose to pressure wash their roofs on average once per year to remove a build-up of dirt and debris. Texas homeowners have to deal with a dry, hot climate that produces many dust build-up on roofs. In this case, a high-pressure or low-pressure wash is the most effectively remove the build-up of dust. The average cost is around $490 per roof.

Shine Window Cleaning is your top choice for exterior cleaning needs. We service both residential and commercial buildings in the Austin, Texas, area. For professional help with your windows, walkways, gutters, roofs, and more, we can help. Contact us for a free quote today.

Recommended Reading: What Is The Best Metal Roof For A House

Costs For Diy Pressure Washing

For the do-it-yourself homeowner, all types of pressure washing can be accomplished but comes with some up-front costs and knowledge. The most important tool needed is a pressure washer. A minimum of 4gpm is recommended for most pressure washing jobs and the costs is around $900 and should include a wand, hose and various tips for different types of jobs. For surface cleaning, a surface cleaner is needed to make the job look professional free from wand marks. Surface cleanersâ costs anywhere from $150 for a 12-inch cleaner to over $1000 for 32-inch cleaners that also require much more expensive 8-10gpm pressure washers. In addition to the pressure washer, a variety of chemicals will need to be purchased from a pressure washing supply store. The most common chemical is 12.5% Sodium Hypochlorite and costs $1-$3 per gallon depending on where you live. Sodium Hypochlorite is the most common chemical used and is diluted to a 1%-%5 solution depending on the job application. Stain removal chemicals can also be purchased and costs around $25 a gallon depending on the type of stain present. All chemicals should be used with proper personal protective equipment and knowledge of their uses.

Patio & Driveway Pressure Washing Prices

Oftentimes, homeowners and small business owners will ask what the cost to pressure wash their driveway or patio is, or if we can pressure wash their dumpster pad.

The answer is yes, we can!

Sidewalls and patios for restaurants and your home are simple to clean, and we use a process of pressure washing and buffing that leaves them looking great!

This process prevents streaking and the zebra look when people pressure wash on their own! However, to pressure wash a patio, pad, driveway or sidewalk will cost somewhere between $150 to $400.

Patio pressure washing prices and driveway pressure washing prices vary depending on you guessed it SIZE!

A mile-long driveway vs a small one car pad will vary in pricing. And while this might be an extreme example, this table can help:

Recommended Reading: What Are Metal Roofs Made Out Of

Alternative Ways To Clean A Roof

The main reason to not use your pressure washer to clean your roof isnt that the water jets will damage your shingles. Its just that there are better, more effective methods.

If your roof is covered in leaves, moss and dirt, try a leaf blower to sweep the roof clean. Got moldy roof stains? Just use a garden spray nozzle and some nontoxic chemicals to remove those ugly black streaks. That should get your shingles looking as good as they were on the day they were nailed into place.

Most of the time, though, a dingy-looking roof isnt a sign it needs to be cleaned its a sign it needs to be replaced. Repairing a few shingles is a simple enough process that any DIYer with a head for heights can tackle. Tearing off a roof entirely and then reshingling the whole thing is a much more complicated process best left to the pros.

How Much Does Pressure Washing Cost

Just the other day, we visited a customers home and the first question she asked was, How much to pressure wash my house?

In fact, if we are being honest, the two most common questions we get from homeowners are:

• How much does it cost to pressure wash my house?
• How much does it cost to power wash my house?

And if you hop on Google and search for pressure washing prices, you will find youre not the only one

And while the actual term for cleaning a house or roof is soft washing we understand that pressure washing/power washing is sometimes use symbolically in lieu of soft washing.

> > The Difference Between Pressure Washing & Soft Washing

However, soft washing is different than pressure washing which uses highly pressurized water. That being said, the answer to her question was well, it depends!

Square footage, the size of the overall home, the stories, and the scope of work can all determine how much the price meter moves up or down.

So while keeping all the different factors in mind, we will aim to give homeowners the best guess estimate of how much pressure washing will run them!

Don’t Miss: How To Get Pigeons Off My Roof

What Are The Benefits Of Power Washing

Power washing your roof may extend the longevity of the roof and will also increase your homes curb appeal. Just like no one likes to drive around in an extremely dirty car, no one likes to pull up to their house and see a dirty, dingy roof that does not match the aesthetics of the rest of the home. Note: it is important to notice if your roof simply needs to be cleaned or is looking dingy because it needs to be replaced, which is a totally different job!

Benefits Of A Clean Roof

Not only will cleaning your roof boost its curb appeal, but it can actually help preserve its structural integrity. Also, a clean roof makes it easy to identify where, if any, areas need repairs.

If you dont soft wash your roof, you may start to see shingle deterioration or wood rot both of which are major headaches to repair. And if you allow moss to grow, you risk damaging your tiles or asphalt shingles. Your shingles might curl and eventually blow off if there are high winds, according to the Asphalt Roofing Manufacturers Association, and the moss can eventually lead to moisture damage and leaks.

Read Also: How Much Does Torch Down Roofing Cost

What Pressure Should I Use To Clean My Roof

The pressure of your building wash differs depending on the roof material. If the pressure is too high, pressure house washing may do more harm than good.

We recommend seeking the help of professional roof cleaning in Sydney. Or, if you’re wary of experimenting with different pressures, there are alternative cleaning methods.

We measure pressure using pounds per square inch . Each pressure washing model should have a gauge with the PSI range.

• Bricks: As bricks don’t have any protective coatings, you can use higher pressure on the exterior house material. However, you might want to be more careful if you have painted bricks. We recommend pressure between 1500 to 3000 PSI.
• Terracotta roofs: Like bricks, you can use a higher pressure of between 3000 to 4000 PSI for terracotta roof tiles. Although, when cleaning your roof, avoid damaging gutters or antennas.
• Limestone tiled roof: Limestone can be brittle and fragile. Start with a low pressure of around 800 PSI and increase it if you don’t see any damage.
• Metal roofing: A metal roof’s surface can typically withstand between 1400 to 4000 PSI. Pressure roof washing can do a fantastic job on metal.

How Roofing Material Influences The Cleaning Process

Some roofing materials are safe to walk on, while others can be challenging or even dangerous.

For example, an asphalt roof with an average pitch is relatively safe and easy to walk on, even when its wet from power washing or soft washing. This is typically the most cost-effective roofing material to have cleaned because it doesnt require any special safety equipment or a higher level of caution.

Clay tiles are more dangerous to walk on, and care must be taken not to crack the tiles. A metal roof can also be dangerous and slick when its wet. Roof cleaners addressing these types of roofs will usually require harnesses and additional safety equipment, and theyll need to take more time to do the job carefully, so prices tend to be a bit higher for these materials.

Don’t Miss: Do I Need Underlayment For Metal Roof Over Shingles

How Much Does It Cost To Pressure Wash A Roof

Although your roof is predominantly out of sight, it collects its fair share of dirt and debris, and in some environments, may even grow unsightly mold. All of this adds up to a need for a bit of cleaning. Occasionally cleaning your roof is part of a good maintenance program to prolong the life of your roof, especially in the dry, dusty regions of Texas.

Pressure washing a roof is a job that is best left up to professionals. However, climbing around on your rooftop is somewhat of a dangerous task, and adding chemicals or high-pressure water only makes it less safe. The national average cost to pressure wash a roof is $490.

Related: How Much Will Gutter Cleaning Cost?

Safety Is Our Top Priority When Working On Your Roof

To safely wash a roof, youll need to use a harness and a lanyard tied to an anchor point. This will assure your safety while youre up on the roof. Youll also need to make sure that you have someone to help you down from the roof if necessary.

In addition, be sure to avoid walking on the roof when its wet. Wet roofs are much more slippery and can cause you to fall and get injured. If the roof is too steep or slippery, its best to hire a professional to do the job for you.

*This safety tip was provided to us from the good guys and gals at Expert Safety Services.

Is soft washing better for my roof than pressure washing?

Yes, soft washing services is a much safer option for your roof than pressure washing.

Pressure washing can cause serious damage to your roof if not done properly. Soft washing uses a detergent solution and low water pressure to clean the surface of your roof. This gentle cleaning method is safe for use on all types of roofs and will remove any built-up dirt, moss, or algae without damaging the surface.

Should I try to clean my roof myself?

No. Roof cleaning is a dangerous job that should only be done by a trained professional. Not only is it risky to try to clean your roof yourself, but you could also injure or kill yourself or someone else.

*This information was provided to us by Joshua from Nashville Roof Cleaners.

What’s the preferred method for cleaning my siding?

Does pressure washing damage roof tiles?

Do you do tile and shingle roof repairs?

Don’t Miss: How To Attach A Patio Roof To An Existing Roof

Electric Vs Gas Power Washer

You can use either a gas or an electric pressure washer. Choose from the following PSI for the job at hand.

• Light Duty up to 1900 PSI – Ideal for washing cars, trucks, motorcycles, boats, outdoor patio furniture, and other light jobs.
• Medium Duty 2000 to 2800 PSI – Ideal for removing and cleaning dirt or mold from your homes siding, fences, decks, and patios.
• Heavy Duty More than 2800 PSI – Ideal for erasing driveway or sidewalk stains, cleaning second-story exteriors and preparing surfaces for paint.

Gas Vs. Electric Pressure Washers

Three: Wash In Sections

Wash the roof in sections, moving from top to bottom in a steady side-to-side sweep. Make your sections the width you can comfortably reach by moving the wand back and forth. Apply detergent to one roof area and then spray it clean. Move on and do the same with the next section.

Make sure youre always standing on a dry roof area because wet shingles are incredibly slippery. Constantly check for accidental damage. Slowly work your way back to the ladder so you can climb down when youre done.

As you can see, pressure washing your roof isnt something to be taken lightly. Not only can it cause horrendous damage if precautions arent followed to the letter, but it can be dangerous. However, there are going to be times that its virtually unavoidable.

If you need to pressure wash your roof and require expert advice on how to choose the best pressure washer, check out our guide!

Don’t Miss: Can Solar Panels Damage My Roof

Questions To Ask Roof Cleaners

• Are you licensed and insured?
• Are you a member of the RCIA?
• Do you charge a flat fee, hourly rate, or per square foot?
• Is it safe to pressure wash my roof?
• What type of cleaning chemicals will you use on my roof?
• Will the chemicals harm my pets or plants?
• Will you cover my plants before cleaning the roof? If yes, do you charge extra for it?
• Will you blow off the roof before cleaning it?
• How long will the cleaning take?
• What safety precautions will you take?
• How often should I have my roof cleaned?

Get free estimates on HomeGuide from trusted pros:

Getting Estimates From Roof Cleaning Companies

Before hiring a roof cleaning company and signing a contract:

• Get three in-person estimates to compare.
• Look for cleaners who are members of the RCIA or ARMA.
• Browse their reviews on HomeGuide and Google.
• Select a company that is licensed, insured, and has been in business longer than five years.
• Request a written estimate, contract, and warranty.
• Avoid making large upfront payments. Use a payment schedule instead.

Also Check: How To Fix A Travel Trailer Roof

Cost To Clean Roof Asphalt Shingles

Soft wash cleans the surface without risking damage to the tiles, costing around $0.30 to $0.75 per square foot. If you have an asphalt shingle roof, a soft wash is the best option. Asphalt shingles are soft and malleable, so they must be handled with care. A high-pressure wash will usually cause problems such as damaging the roof or loosening the shingles. Algae and moss are common on this material, so regular cleaning is necessary.