Friday, December 1, 2023
HomeBuildHow To Build A Roof Over My Patio

How To Build A Roof Over My Patio

Prevent The Splash Of The Rain Let The Air Flow

Building a Roof over My Deck Part 1

The ultimate goal of installing a patio roof is to protect you from the rain and the glare of the sunlight. Unfortunately, it requires you to block the air flow sometimes.

To prevent the splash of the rain, but let the air flow, you need to place the patio sheeting over the top of the roof about 300 millimeters so that it can perform shield from the rain without blocking the airflow.

It is your best bet especially if you have a fully-covered patio which do not have much airflow.

How To Build A Porch Roof

You have an outside porch and you want to cover it with a roof, so you can enjoy it, rain or shine. Building a porch roof can be as complicated as you want, but here is a simple method for building a roof over a porch. We will build a roof for a porch in your backyard.

Materials needed:

  • Roofing tacks

Here’s what to do:

  • Erect support posts for the roof. Cut 4-by-4 posts as long as you wish the height of the roof to be. Dig holes 18 inches deep in the ground alongside the porch. Dig one hole at each corner of the porch. Place the posts in holes. Make sure the posts are supported by stones in the holes, so they remain vertical. Pour concrete into the holes and leave to set.
  • Construct a frame for the top of the posts. Measure two 2-by-8 pieces of wood the length of the porch and two 2-by-8 pieces of wood the width of the porch. Add 8 inches to each measurement for overhang. Cut the pieces of wood. Attach them to each other to make a rectangular frame.
  • Cut the cross pieces of the frame. Cut 2-by-4 pieces of wood to make cross bars for the frame. Attach them across the depth of the frame, 18 inches apart.
  • Attach the frame to the top of the support posts. Attach the frame to the top of the support posts with heavy duty bolts. You’ll probably need help with this.
  • Lay the roof on the frame. Screw the correct size of 5/8 plywood to the top of the frame. Make sure you cut it big enough to overhang the frame by at least 2 inches on each side.
  • Type Of Roof Design And Cost Of Materials

    This factor has a wide range of variables. A deck can be covered with a pavilion, a more solid weather protection. Or it can be covered with a pergola allowing sun and rain while offering cover with a retractable canopy.

    The most popular types of pavilion roofs are flat, gable, hip, and skillion .

    A flat roof is an easier construction project than the gable and hip roofs, saving also in construction materials. The roof is slightly pitched for water runoff.

    However, water collection can still be a problem. The roof must be waterproof and is not really recommended for heavy rain or snow climates.

    A gable roof is two equal roof panels pitched at an identical angle. The gable roof itself is easy to build and generally less expensive than more complex roof designs. Water easily flows off.

    In high wind locations, the frames need sturdy support and roof braces. Excessive roof overhang is also a factor as very high winds can lift off the roof. High winds can also blow off the roofing materials, such as shingles.

    A hip roof is sloped on four sides. While not absolutely indestructible, this roof is more durable than a gable roof, especially in a high wind location.

    The hip roof also allows rain and snow to slide off. However, hip roofs are more complex in design and, thus, more expensive to build in materials and labor.

    This roof is easier to build and uses fewer construction materials. This pitched roof is a good choice in high rain and snow locations.

    Don’t Miss: Where Can I Buy Roofing Shingles

    Raise The Roof By 500 Millimeters

    You can raise the patio roof up to 500 millimeters by removing the eaves, fascia, and gutter. After that, cut the rafters back to the wall line.

    The back channel is connected to the rafter directly and reinforced. By doing this method, you will have a clean finish that is connected to the wall line.

    But, you may also need to install transfer flashings on top to complete the look.

    Dont Spend All Your Money On One Cryptocurrency

    How To Build A Gable Roof Over A Patio

    Perhaps the most important cryptocurrency tip we can impart is not to spend all your money on a single cryptocurrency. By nature, cryptocurrencies are incredibly volatile. This means that the digital currency could be trading impressively well one day, only to crash the next day or only a few hours later. There have been instances in the past where people have lost their entire life savings during a cryptocurrency crash.

    You want to try to avoid this happening to you at all costs, which is why its better to split up your investments and buy a variety of different cryptocurrencies. Do your research and choose three cryptocurrencies that you believe are offering the most stability and buy them. Splitting up your investments could maximize your returns or ensure you dont lose too much.

    Also Check: Do I Need A Permit To Replace My Roof

    Building A Porch Roof Using Trusses

    A planar truss, like the one above, lies in a single plane and is usually used together to form the roof support structure. They are extremely strong and normally constructed off site and made to specific measurements. Therefore, it is very important to ensure your measurements are correct before ordering.Porch roof construction using trusses is much like using basic rafter construction as outlined above with a few exceptions. Trusses definitely expedite the process.

    Where Should You Build Your Patio Cover

    While the answer to this question seems obvious , there are shade and functional considerations that need to be taken into account. Most patios are typically off the back door but that location may not provide an adequate shaded area. Covered patios are ideal for outdoor living areas, dining areas, built in fireplaces or outdoor kitchens. It is best to consult with a design professional to determine where the maximum amount of shade and functionality can be achieved in your backyard with your new patio cover.

    One other major factor in location of any new structure is city building codes and Home Owners Associations restrictions. All cities have certain guidelines pertaining to where an attached or detached structure can be built. In addition to the City requirements, HOAs will have a set of guidelines pertaining to design, finish material and height restrictions among other things. Once again, it is best to consult a design professional that is familiar with your citys requirements and HOA guidelines.

    Don’t Miss: What Is The Most Durable Type Of Roof

    How To Build A Roof Over My Existing Deck

    Summer may be over, but its the perfect time to start building a roof over your deck for next years sunny season. If youre looking to enjoy the great outdoors right from your backyard while still getting some relief from the sun or rain, a roof over your deck or patio is the perfect solution.

    So, how do you go about it? You may want to just get it over with and do it yourself, but sometimes its better to hire a professional who can get it done efficiently. In this blog, were going to cover the benefits of building a roof over your deck, how to do it, and the average costs. Here at Legacy Service, we will do all we can to help you perfect your homes exterior. If you have any questions or would like to schedule an appointment with us for a roof replacement, give us a call at 215-798-9790 or fill out a contact form here.

    Patio Roof Skylight Ideas

    DIY Patio Roof Build

    If you choose a solid patio roof design, such as timber-framed, wood-paneled, or metal, then youll have a solid roof covering you. While this is excellent at protecting you from the elements, they also block the light. This can make your patio feel dark on even the brightest of sunny days. The answer to this problem is to add a skylight.

    You have a lot of freedom in how you choose to add your skylight. You could have several smaller skylights that distribute light evenly throughout your patio. Or you could have one large skylight that allows a lot of light in one spot. When placing your skylights, consider the length and width of your patio and where the main supporting beams are located

    It is always better to install a skylight when you build your roof. There is a much greater margin of error when you try to retrofit a skylight. So if you think you might want one, take the plunge and install it when you build your roof.

    Don’t Miss: How To Start A Roofing Company In Georgia

    How To Build A Roof Over A Deck Instructions How To Build A Roof Over The Porch

    Do you have a deck or patio that needs covering? Did you asked yourself how to build a roof over a deck? While some people decide to hire professional roofers to do the job, this sort of thing might be easier than you think to get done yourself. You should never bite off more than you can chew, but if youve got the right skills and tools for the job, it could be a lot more easy and satisfying to simply get things done yourself.

    Tips For Purchasing Materials

  • Be flexible. I had originally planned on using 4×4 beams and joists, but local codes wouldnt allow for them, so I used 10×2″ headers and 6×2″ joists, which worked out just fine. Also, be prepared to modify your plan at the store when youre getting your materials, as doing so can save you money. For instance, I chose drywall screws instead of nails because, for some reason, they were less expensive, and they wont try to work themselves back out after a few years. Another substitution I made was choosing three- and four-inch deck screws instead of framing nails. Although more costly, they hold much better than framing nails outdoors.
  • Shop around. Shopping around for the best prices for materials was absolutely necessary. In the same town, in an area of fewer than 10 miles, the difference in prices was enormous. Total material costs ranged from $2,200 down to $800.
  • Beware the store associates. Some are aggressive and want to push customers into an insane buying frenzy, bringing up a storm of confusing nonsense that somehow equates spending more to saving more. The lumber store I bought from had an associate who simply made sure I bought the correct materials for the job by looking over my plan and suggesting shorter screws for the joist hangars and a lower grade of lumber for the areas of the patio cover that would not be exposed to the weather. The associate also arranged for delivery, which cost $25.
  • Recommended Reading: How Many Boxes Of Roofing Nails Per Square

    What Can I Use To Cover My Deck

    If you search how to build a roof over a deck online, it will help you determine what to use to cover your deck. The three main options include a gable roof, a hip roof, and a shed roof. Once you determine the type of roof you want for your deck, then youll have to choose the type of material. We suggest contacting your local roofing company that builds roof decks to schedule a consultation.

    Diy: Turning A Concrete Slab Into A Covered Deck

    23 Cool How To Put A Roof Over A Deck

    Posted on Published:

    Ever thought about turning your concrete slab into a covered deck? Its definitely doable! Here are some thoughts, tips, & photos from our experience!

    Well, this post has been a long time coming. We completed our wood deck covering for the front of the house back in the spring of 2017, and published that post at the same time I actually started this project, which was a much larger undertaking! Shockingly to me, that post about turning a cement porch into a wood deck has become one of the most popular posts here at Catz, and Ive had a number of people ask for this post about the back deck. My plan was to publish it last summer, but it ended up being a surprisingly busy season for us, so here I am shooting for this spring!

    An idea began to develop, and after sketching it out and doing some research, we decided it was plausible a peaked, 12-foot, clear roof to cover the new deck. It was certainly going to be a little more complicated than a straight, slanted roof, but we thought the potential benefits were worth it. At 12 feet, it would be high enough in the center to feel open and airy, while the clear roofing would let lots of light through during the many, many gray days here in the Pacific Northwest. That was the idea anyway

    Also Check: How To Build A Living Roof

    Installing The Ledger Board

    First I removed the 1/4 plywood dressing right below the drip edge and saw a very solid framing 2×4 underneath, perfect for attaching the ledger board, which attaches the cover to the roof frame. The local building code required a 2×6 ledger board, which meant I had to saw off two inches of wood from the top of the bay windows box. Next, I pre-drilled 1/8 holes, 6 inches apart, in the ledger board, because it was treated lumber and the deck screws would need a little help getting started. After attaching the ledger board with 4 decking screws, I used a large staple gun to staple the phone, internet, and cable lines to it, on the inside toward the house, to better protect them from the weather.

    Post hole position and completed post hole

    Stylish Beige Patio Roof

    This patio roof complements the exterior very well. The soft beige color provides a relaxed ambiance to the patio so that it can be a great place to call it a day.

    The pergola style allows natural light pass through which makes the patio shaded partially. You will not miss the warm of the sun when sitting in the patio.

    Also Check: How Much For A Patio Roof

    Prep House For New Roof Framing

    If you install a slanted roof over your deck, your deck roof rafters will have to attach to your existing roof rafters or trusses. To do this, youll have to remove a section of existing roofing materials and sheathing, plus soffit, fascia, and any gutters that are in the way.

    If your new deck roof connects to a flat, vertical face such as a homes exterior wall, youll need a ledger board fastened to a rim joist. Youll need to remove the siding to fasten the ledger. Once in place, the ledger can support beams or joists that will support rafters or trusses for gable or hip roof construction.

    When installing the ledger board, youll need to put flashing over the top edge of the board. This flashing should go up and under your siding. You should use an adhesive to affix it to the sheathing beneath the siding.

    Youll need to bend the flashing to sit flush over the top ledger board edge. The flashing should cover the top half of the ledger board. Once the flashing is installed, the rafters will sit on top of the flashing.

    Building A Patio Cover

    How To Frame A Roof Over A Deck | Outdoor Kitchen Part 2

    Overview: The new patio cover will be built using Western Red Cedar 4×6 posts, 4×6 beams, and 2×6 rafters . The roof will be constructed using Multi-Core Galvalume metal roofing. The posts will be attached to the slab using galvanized post anchors and the rafters will be attached to the beams using various straps, ties, and joist hangers.

    Free-Standing Patio Cover Plans

    Assumptions: A concrete patio slab is already in place with footings capable of supporting the load of the new patio cover . The footings are not shown in this example, since they vary considerably depending on your location and soil composition.

    The dimensions indicated in these drawings of the existing structure are for example only. Your existing structure will enfluence your patio cover design and make it distinctive and unique.

    Front Elevation

    Since this patio cover design has supporting posts located close to the existing structure, I tried to position the patio cover and slab, so that the posts were not located directly in front of windows and doors.

    Side Elevation

    This patio cover plan example uses galvanized metal as the roofing material. You can alternatively use shingles as roofing material, providing the roof pitch on your patio cover falls within the shingle manufacturer’s specifications. This patio cover on provides an example of a shingle roof design.

    Roof Framing PlanRoof Plan – Top RightRoof Plan – Front RightBuilding a Patio Cover – Brace Detail

    What next?

    You May Like: What Does A Roofing Contractor Do

    How Do You Install A Patio Roof On An Existing House

    Most Common Ways to Attach A Patio Roof to An Existing House

  • Fix The Back Channel to The Fascia Boards Underneath The Gutter Directly.
  • Make The Patio Roof A Little Bit Higher.
  • Install Some Riser Brackets for More Height.
  • Prevent The Splash Of The Rain, Let The Air Flow.
  • The Simplest Way To Get The Cleanest Look.
  • . Herein, how much does it cost to put a roof over a patio?

    Average Cost. The average cost for a patio roof addition using low-maintenance wood-patterned aluminum runs for about $6,000 to $10,000 for an area of 20 by 20 feet, as of 2011. A screen can be added for an additional cost of $3,000 to $4,000. Adding a wood lattice roof can range between $500 and $10,000.

    Also, do you need a permit to build a covered patio? Yes, a permit is required for patio coversLike all home improvement projects, the permitting process aims make sure that construction is safe and stable. It might be tempting to try to get away with not obtaining the correct permit, but you should never cut corners.

    Keeping this in consideration, how do you attach a ledger board to a house for a patio cover?

    Attach the ledger with 1/2-inch-diameter lag screws or bolts every 16 inches . Slip stainless-steel washers between the ledger and the siding to allow water to flow behind the ledger. If you can’t get behind the joist to cinch down nuts, use lag screws.

    What do you call a roof over a patio?

    Check out the cheapest patio material here to find some great ideas for your green space!

  • Pavers.

    Most Popular