Thursday, July 11, 2024
HomeMust ReadHow To Kool Seal A Mobile Home Roof

How To Kool Seal A Mobile Home Roof

Cool Roof Coating For Reflecting Heat

Mobile Home Trailer (Roof Coating) Kool seal

Coating a roof with white helps reflect solar radiation, reducing cooling costs by reducing indoor air temperature by as much as 20+ degrees. Acrylic, silicone, polyurea and EPDM all come in white. However, silicone tends to lose its reflective abilities faster than other types of roofing.

If you are sealing a pre-existing roofing membrane you may only need one coat. This can reduce costs an average of $0.50 to $1.50 per square foot.

Can I Use Digital Payments To Pay For Roof Installation Replacement Or Repair

Digital payment platforms are common among roofers, roof repair companies and other services. The COVID-19 pandemic will likely cause more service providers to adopt platforms like PayPal, Zelle, Google Pay, Square Cash, Venmo and others instead of cash or check to decrease the risk of transmission.

You can typically find out whether roofers accept digital payments on their online profiles, and you should confirm this information with them during a consultation call.

Recommended Reading: San Benito Rv Camping Resort

Stage One Coating The Roof Seams J Rail And Flashing

Before you start to coat these areas, you should use some patching cement and apply it with a thick brush so that you cover all the seams and edges of your roof. Also, use it to cover all the screws. Once the patching cement is dry, you can start coating carefully using a brush.

Roof seams connect the roof panels. Its not uncommon that they pop out due to the wind or other influences. Thats why its important that you protect these areas. J rails are the most common areas for leaks, so thats why they also need protection.

So many mobile home owners have experienced the damage caused by leaking j rails. One example is that all the leaking water can fall down the side walls of your mobile home and cause damage. And lastly, in order to prevent any damage to your flashing, apply coating on these areas also.

Flashing leads the water away, so its under strong influence of moisture. Coating your flashing will protect it and keep the water away from your home interior.

Apply the recommended number of layers in precise time frames. In order to check how many layers of coating you have to apply and in which time frames, check the users manual. Most of the coating packages hold all the information regarding the use of their coating product. Once you are done with seams, j rail and flashing, you can move to stage two.

Also Check: How Many Hail Hits To Replace Roof

Benefits Of Sealing Your Rv Roof

Sealing your RVs roof is a vital part of RV maintenance. Regularly doing so helps protect your roof, its features, and, ultimately, your entire RV.

The sealing process will vary depending on your roofs material type and the sealant you use. However, sealing your roof offers you several crucial benefits such as structural protection, reducing wear and tear, preventing leaks, extending your roofs lifespan, regulating internal temperature, reduces energy use, and saves money.

Sealing And Coating Is The Best Way To Fix Roof Rumble

Best Mobile Home Roof Sealer

The best way to handle roof rumble is to stop the wind from getting under that metal. One way to do that is to seal the seams and edges and then coat the entire roof with an elastomeric roof coating. The white acrylic liquid is a popular solution. Pay particular attention to the edge of the roof.

It is recommended that you coat your mobile homes flat roof every other year anyway.

Read Also: How To Clean Rv Roof

Proguard F99911 Liquid Roof

If you are looking for an EPDM liquid coating for your RVs roof, then you will surely find Proguard F99911 useful. You can use it as a coating for a newly installed rubber roof. You also have the chance of using it to do repairs to your present roof. One major advantage of this liquid roof coating is that it only involves a single coat application.

It works 100% as an EPDM rubber coating while also boasting of up to 5-year warranty. Another advantage of this liquid coating is its wide coverage. It comes in a 1-gallon kit, which is capable of covering an area of around 42 to 45 square feet. In addition, it is capable of withstanding a wide range of temperatures from 6o degrees to 300 degrees Fahrenheit.

It delivers an excellent performance as a liquid roof coating. Once it cures completely, you will enjoy the nice layer of rubber that it provides. The coating is also 100% white and shiny while also providing a nice rubbery feel.

It is easy to apply while also boasting of its quick dry time. You will also love the thickness of this coating. It is just right, not too thick nor thin, making it really good for your RV roof.

So What Are We Waiting For Lets Get Started

Well, not so fast

First of all, any kind of roof coating requires your mobile homes roof to be in tip top condition. For a full list of potential and common mobile home roof problems to check before you apply the coat look here. You will need to fix all these problems before applying a new coat. Before you sigh and call it a day, remember that these are problems you should fix anyway.

Secondly, make sure you have enough roof coating for your home. Generally, a 4.7-gallon bucket covers one coat of 250-350 sq ft. Remember that suppliers recommend two coats to get the best out of your coating. A 4.7/5 gallon bucket is usually priced around $90 $140, depending on the quality .

Thirdly, make sure you have all the other necessary materials and equipment. Reference the list of problems above as a guide. This is also a handy step-by-step guide that counts for any type of roof coating. It also covers what equipment you need.

In conclusion, a cool roof coating is an effective way to clean your mobile home in summer, the amount effort and time needed its definitely worth it. Especially if you consider the added benefits it gives you. One last thing to keep in mind is that the coating will need to be redone every 2 to 10 years, depending on strain and the quality product. With some planning, however, you should be able to include this in your usual roof maintenance.

In case youre interested, here is a great guide on roof maintenance from our own blog:

Read Also: Can You Put A Skylight In A Metal Roof

Sealing Costs By Roof Material And Type

Pitched roofs cost 35% to50% more in labor than flat roofs due to greater installation complexity and safety precautions.

  • Acrylic-based coatings are best for sloped roofs.
  • Steeper roofs with tiles or shingles wont need coatings.
Sealing costs by roof material and type

Sealant type
Mobile home roof $0.50 $4.50

Not all coating sealants adhere to all roofs well. Always check the coating manufacturers instructions to verify compatibility with the roof materials.

The Benefits Of Mobile Home Roof Coatings

How To Apply Kool Seal Roof Coating on a Mobile Home

There are multiple benefits of applying a roof coating every 2-10 years.

  • Improved protection
  • Mobile home roof sealant can help protect your roof from severe weather, including heavy rain. Acting as a sealant to prevent water from leaking into or damaging your roof and ceilings
  • A roof coating can help maintain your roofs longevity by reducing harmful environmental damage and overall costs of repairs.
  • Roof coating requires about 30% to 40% of the price of a new roof, which can cost you thousands of dollars and extend your roofs lifespan for up to 20 years.
  • These coatings can help reduce the amount of energy needed to cool your home. Most roof coatings have reflective properties, which will reflect ultraviolet rays that hit your home and cause it to heat up instead of absorbing the heat.
  • Environmental Benefits
  • Reduced local air temperatures, also referred to as the urban heat island effect. Urban heat island refers to the significantly warmer area than surrounding rural areas due to homes re-emitting the suns heat more than the surrounding natural landscapes.
  • Lower peak electricity demands, which can help prevent power outages for highly populated areas
  • Read Also: What Is A Epdm Rubber Roof

    Bitumen Roof Coating Cost

    Bitumen roof coating costs $1.00 to $2.50 per square foot installed for one new layer of hot roofing tar with a mineral surface cap sheet. Contractors also use asphalt-based sealants and roofing cements around skylights, chimneys, and flashing on many roof types.

    • Asphalt-cement sealants cost $10 to $25 per square foot for minor leak repairs.
    • Fees are 20% to 25% more for complex-shaped roofs.

    Return to top

    Can You Put Kool Seal On A Rubber Rv Roof

    Two coats recommended. Must be top coated with Kool Seal RV Elastomeric Finish Coats. Designed for EPDM rubber roofs. Can also be used on metal, EPDM and other single ply membranes, modified bitumen, polyurethane foam, concrete, and previously coated surfaces.Do NOT use over asphalt shingles or silicone coatings.

    Don’t Miss: How To Install Insulation Under Metal Roofing

    How To Apply A Mobile Home Roof Coating

    Different materials for your mobile home roof may have different features. You will have to choose by looking at its application method, maintenance requirements, and the area your mobile home is in.

    You should know the ins and outs of applying roof coating materials. This might save you a few bucks for the installation. Even if you get some help with the project, it helps to know just what to expect. Let us now have a look at how to apply different kinds of roof coating to your mobile home:

  • Applying Aluminum Coating
  • For most manufacturers, this type of coating will fully form around 24 hours after application. This will get you a cost-effective, heat-diverting, and durable roof coating.

    When you purchase this coating, make sure to mention that it is for a mobile home. The coating for regular house roofs is different.

  • Applying Silicone Coating
  • Silicone provides insulation, which is best for colder climates. Its smooth surface will also reflect sunlight, so it is suitable for the warmer weather as well. In a nutshell, it wont crack in the cold nor melt in the heat.

    Silicone coating requires no specific surface preparation like metal primers. It will fill up the cracks and dents, therefore you can just start by following the instructions from the manufacturer.

  • Applying Acrylic Coating
  • This kind of coating will usually apply in a similar way to repair paint. You will have to give the roof a few layers so that the coating remains durable and effective.

    Things To Consider Before Buying Roof Sealants/coatings

    Blue Label Kool Seal Aluminum Roof Coating Mobile Home

    Though most coatings are extremely diverse in their uses, there are still properties and features worth minding. When choosing an elastomeric roof coating, pay attention to the manufacturer, expiration day, and, of course, the composition.

    Now, lets take a look at the details that matter when browsing for this product.

    Types of roof coatings

    First, make sure to consider the types of common roof coatings youre going to use. Different sealants make for different problems and, subsequently, different solutions. Here are a few of the most popular ones.

    • Silicone-infused products. These are a normal choice for people whose property is inflicted by various water-related issues. Its great for ensuring that your roof is well-protected from the rain and moisture.
    • Acrylic-based products. If youre looking for a better insulator, then consider acrylic sealants. They deal superbly with excessive heat, as well as harmful ultraviolet radiation both for the inside and outside of buildings.
    • Polymer products. Such coatings are extremely elastic and durable. They suit greatly for people who tend to spend too much time on the rooftop. Also, these products are very damage-resilient, as well as low-maintenance.
    • Bitumen-infused products. Thanks to a blend of hydrocarbons and rubber, such coatings are smoother and more reliable than regular risen coatings.

    Roof-base material

    Recommended Reading: How Much Does A Roof Cost In California

    Recommended Reading: How To Remove Black Mold From Roof Shingles

    Cool Seal For Mobile Homes

    We continuously execute our spirit of âInnovation bringing development, Highly-quality ensuring subsistence, Management advertising and marketing gain, Credit history attracting buyers for Cool Seal For Mobile Homes, Anti Rust Coating For Steel, Basement Interior Waterproofing, Clear Waterproof Paint,2 Pack Paint. Together with our efforts, our products and solutions have won the trust of clients and been very salable each here and abroad. The product will supply to all over the world, such as Europe, America, Australia,Oman, Cyprus,Indonesia, Hungary.Really should any of these items be of interest to you, please let us know. We will be pleased to give you a quotation upon receipt of oneâs detailed specifications. Weâve our personal specialist R& D enginners to meet any of the requriements, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.

    How Do You Find A Leak In A Trailer Roof

    Common Leak Areas

    Check for cracks, thinning, worn spots and other damage. This includes checking any sealants and/or caulk on the roof and around windows, moldings, vents, doors, skylights and roof seams. Keep in mind that not all of your water leaks will come from the exterior so look at all the possibilities.

    Don’t Miss: Do Metal Roofs Make Your House Hotter

    Mobile Home Roofing Materials

    Just as it is with the shape of your mobile home roof, the material the roof is made of may be an indication of your homes age. Manufactured homes built before 1976 usually have aluminum sheet metal roofs.

    Modern mobile homes have roofs made of metal roofing panels or asphalt shingles. Other types of roofing materials for mobile homes include PVC and rubber membranes.

    Cleaining Up The Surface

    Let me Show you how I KoolSeal a mobile home trailer roof

    You will need to use sandpaper and wire brush in order to remove your old coating, and to fix any bumps in your surface. Use a broom and clean the entire surface, since you need it to be smooth and clean in order to apply your coating and protect your roof. Take special care while you clean up the seals next to j rails, flashing and roof seems.

    Don’t Miss: How To Build A Gazebo Roof

    Top 10 Best Elastomeric Roof Coating For Mobile Home In

    When it comes to buying Best Elastomeric Roof Coating For Mobile Home, you can easily get carried away with the limitless options and each claiming to be the perfect suit for your requirements. So, we have researched deeply to bring this all-out review to help you in the purchasing process.You will love our in-depth product review that focuses on performance, longevity, real user opinions, pros and cons, and most importantly, its value for money.Lastly, we have included a useful buying guide to know what factors you should look for when buying the product you need.


    What Is The Best Sealant For A Galvanized Roof

    Titebond is a great metal roof sealant used for repairing metal roofs and installing new metal roofs. The adhesion of Titebond to both Kynar painted metal roofing and gal-vell is excellent, and the material stays flexible over time so that it holds the metal roof in place through expansion and contraction cycles.

    Recommended Reading: How Much Would A New Roof Cost

    The Importance Of Focusing On Mobile Home Roof Coating

    Mobile home roofs require a bit more care and maintenance than you may think. Yes, those wood subfloors will also need some effort on your part, but your mobile home roof is your literal shelter. Without the proper steps and precautions, the entire roof might cave in or deteriorate quickly over a short period. With that said, there are several options to choose for your mobile home roof coating.

    If spending a lot on roof repair or fines after a roof inspection doesnt sound appealing, its best to do your research right away. Re-installing your mobile home roof may only take a few hours, but it can save you a lot of hassle and cash down the road.

    How Much Kool Seal Will I Need To Cover My Roof

    Aluminum Kool Seal Roof Coating

    Kool Seal is a brand of roof coatings frequently used on metal roofs, mobile home roofs and recreational vehicle, or RV, roofs. The product may also be appropriate for flat roofs, depending on which formulation you use.

    Kool Seal is not difficult to apply to existing roofs and helps block hot summer sun from penetrating through the roof into the home. The proper application amount is determined primarily by which Kool Seal product you use, as well as the roof’s composition, condition and size.

    Also Check: How To Get Rid Of Squirrels In Roof

    What Company Makes The Best Roofing Shingles

    • GAF. GAF is the largest coating manufacturer in the United States, making it one of the largest coating manufacturers in the world.
    • Owens Corning. Owens Corning may not be as popular as GAF, but the difference is quite small.
    • definitive. Sureteed is a premium siding manufacturer and prices generally reflect that fact.

    Stage Two Coating Of The Roof Surface

    The final stage of the final step. Coating your mobile home roof is an important task and you need to handle it with care. In order to make this clear, we shall break the whole process down in a few important points.

    • Check the label on the package and make sure that you see how many gallons of coating covers a certain surface. Measure the surface of your roof in order to decide how much coating material you will need to use.
    • If necessary, stir or otherwise prepare the coating for use. The label on the package should have the preparation instructions.
    • Use a recommended tool, such as a roof brush or spray gun, and start applying the first layer of coating. Its important that you equally coat every part of your roof and pay attention to the amount of coating that youre applying. You dont want to apply a layer thats too thick or too thin. Both will do you no good.
    • In case that you need to wait for the layer to dry off and then apply a new layer, do so in recommended time. Always remember that each brand has its own preparation and application process.
    • Wait for your coating to dry off.

    If the coating material allows it, you can apply paint and make your roof look even better.

    You May Like: Does Homeowners Insurance Pay For New Roof

    Also Check: How To Pay For Roof Replacement


    Most Popular