How Much Does A Flat Rubber Roof Cost

Can I Turn My Flat Roof Into A Roof Terrace

Most flat roofs have enough structural strength to support a roof terrace. In concrete or steel frame buildings, the existing flat roof is likely to have enough structural strength for a terrace because the roof is constructed like the floor structures below.

However, it is always best to consult with a professional to determine if your particular roof can support the weight of a roof terrace.

How Can I Save Money On A Rubber Roof

If you are competent at DIY, you could install the rubber roofing yourself. This will save you the labour costs.

It is possible to buy an EPDM rubber roof kit. They contain the rubber and the adhesive for a free-standing structure like a shed or a garage.

The cost depends on the size, but an 8 x 6 feet kit, is between £70-£120.

If you prefer to have your rubber roof installed by a professional, then use HouseholdQuotes to find reliable roof installers in your area.

Fill in the online form. Tell us what you need, and well find you rubber roofing installers to give you no-obligation quotes.

Comparing Quotes Could Save You Up To 40%:

Dont Miss: Metal Roof Gable Overhang

A Further Look At Epdm

The fundamental characteristics of EPDM membrane are it is black and rubber. It is understood to be very flexible. Though that is with regards to the vulcanized form of the material. Its rarely referenced as such because its the typical form.

Non-vulcanized is less flexible and is referenced as the form of the material used for flashing or sealing seams between roof and penetrations from extruding pipes or other such roofing features.

While black is easily the most common color, EPDM does sell with a white surface, or laminated top. This is done to compete with the TPO and PVC options and to achieve the CoolRoof ratings and/or energy-efficiency performance effects. Yet, those other materials are vastly superior in reflecting UV rays, whereas EPDM either is not as efficient, or its a matter of an ongoing debate.

Note that EPDM liquid roof coatings are a different product from EPDM rubber membranes.

Being black though has its benefits, and is said to block UV rays, or absorb heat, which in colder climates is desired. If for any reason, black doesnt appeal to you, using an acrylic paint on the surface does allow you to have unlimited color options.

EPDM is known to require ongoing maintenance with the seams due to how its seams hold up or dry out and become compromised over time. Resealing and re-coating are the most viable options and really do extend the life of the roof.

Recommended Reading: How To Repair Leaking Roof Vent

Rubber Roofing Costs: 2022 Price Comparison Uk

If youre building a shed, workshop, garage, or even a flat-roofed extension to your home, consider EPDM rubber roof installation as a weatherproof cover.

EPDM rubber is very affordable, considering it lasts for around 50 years if properly installed. The cost of a rubber roofing installation for a typical 15m2 single garage is around £900-£1350 , which calculates to £60-£90/m2,

Unlike traditional bitumen felt roofing, EPDM rubber needs little maintenance and lasts for decades. Its watertight, algae and moss proof, and can easily be repaired if it accidentally gets torn by falling branches or other mishaps.

This guide describes the benefits of using EPDM as a flat roofing material, its costs, and maintenance needs. We also explain how you can find a company to fit the roof. Alternatively, fill out the form on this page, and well put you in touch with EPDM roofing companies that will submit quotes for the work.

Main Topics

Heres A Typical Works Schedule For A New Rubber Flat Roof

This schedule is based on the written prices given to us by the 34 roofing firms:

• Erect access equipment to the desired work height.
• Remove the existing flat roof covering.
• Inspect the existing timber decking boards.
• If the decking is sound, so theres a new, clean surface for the rubber to adhere to.
• If the decking has sagged, is rotten, wet or in generally poor condition, replace with new OSB decking boards.
• Install the rubber EPDM membrane to the decking with adhesive.
• Install black metal edging trims as required.
• Lower access equipment and remove all waste material.

Photo shows all the items needed for a small porch installation. Image source.

Read Also: How Much For A Metal Roof Installed

Factors Affecting Rubber Roofing Costs

Most rubber roofs are unique as they are cut to fit your exact roof, whatever the shape. As such, it can be difficult to estimate the rubber roofing cost accurately. To budget for rubber roof installation, it is a good idea to take the following into account:

• Size of roof: The larger your roof, the greater the price of installation will be.
• Type of rubber roof: With several different options such as EPDM, the cost of rubber roofing will vary between each type.
• Ease of access: If your roof is an odd shape, or difficult to access, this will push up the price.
• Height of roof: Higher roofs come with added danger and risk of injury so will therefore be more expensive to work on.
• Location: The labour cost that your tradesperson charges will be higher in places like London and the South East due to higher living costs.
• Adding roof slope to aid drainage: It is possible to alter the slope of a roof to help rainwater drain off, although this will be charged at a premium.
• Adding insulation: It is wise to ensure your roof is properly insulated to make your home more energy-efficient.
• Any repairs to timber required: If the timber of your roof is damaged from moisture or flying debris, it is necessary to fix this before adding your rubber roof.

The Different Types Of Flat Roofing

There are four types of used in the Boston area.

Perhaps the most well known type of flat top roofing is called the built-up roof. This type of roofing consist primarily of several layers of materials that are laid down on top of each other. The material used can be quite varied, including everything from hot tar, gravel, fiberglass and even roofing felt. One of the significant advantages of this type of roofing is that it is fire-resistant, but because of the smelly nature of the hot tar used, using it on buildings that are regularly occupied isnt always the best option. This choice can be a very economical one, with the cost per square foot of installation being somewhere between $3.50 and $7.00.

Keep in mind though, EPDM membrane roofs arent the only choice available if youre considering a membrane style roofing system. Another choice is a PVC membrane roof. Although it is a bit more expensive at $7.00 to $11.00 per square foot due to the increased amount of labor, it does have some significant advantages. One of the most notable is the sheer overall durability of the roofing system. Another is the fact that it is one of the most environmentally friendly options on the market today. Its also resistant to many chemicals, moisture, wind, fire and even some chemicals. As you can imagine, a roof made from this material has a significant chance of surviving here in Massachusetts.

You May Like: Do You Need A Permit To Fix A Roof

Sealing Costs By Roof Material And Type

Pitched roofs cost 35% to50% more in labor than flat roofs due to greater installation complexity and safety precautions.

• Acrylic-based coatings are best for sloped roofs.
• Steeper roofs with tiles or shingles wont need coatings.

Not all coating sealants adhere to all roofs well. Always check the coating manufacturers instructions to verify compatibility with the roof materials.

Whats Involved In Installing A Rubber Roof On Top Of Old Rubber Roofing Or A New Wood Base

Rubber roofing can be installed on top of old rubber roofing or a timber or asphalt base bond.

Inspect the roof to ensure the joists and boarding is in good condition. If they are damaged or in poor condition have them repaired or replaced.

Clean the roof and make sure it is completely dry. Lay out the rubber membrane and leave it to settle for at least 40 minutes, or longer if the weather is cold.

When the membrane has settled, fold it back until half of the roof is uncovered. Apply your water-based adhesive to the uncovered part of the roof using a roller.

Take the rolled back rubber membrane and apply it to the adhesive immediately. Get rid of any air bubbles by sweeping over the membrane with a broom and a small roller.

Now do the same again for the other side of the roof.

Next, apply adhesive to the upstands and the membrane and apply the membrane to the upstand. Cut the rubber down to size.

Apply a long bar and install your lead flashing. Install coping stones if you want an attractive finish.

You May Like: What Is The Best Metal Roof Color

Fiberglass Flat Roof Cost

A fiberglass flat roof averages between $4 and $8 to install. Fiberglass is a newer roofing material that works well for both pitched and non-pitched roofs. It is installed using panels that are installed on the roof overlapping each other. Most times, fiberglass roofs are double layered. This type of roof is popular due to its cost and water-resistant properties. A fiberglass roof is much more durable than other materials and lasts for 25 plus years. A few disadvantages include the installation is based on the weather, and they arent recommended for larger roofs.

Should You Install An Epdm Roof

There are a number of factors to consider when deciding upon your roofing material, whether its EPDM or another type.

For now, lets focus on EPDM. Should you install it?

If you have anything other than a flat or low slope roof, EPDM probably wouldnt be the right choice. If you do have one of the two, lets continue!

EPDM is one of the leading choices when it comes to rubber roofing membranes for flat or low slope roofs. We cover the pros and cons of EPDM in a section above. If the pros outweigh the cons for you, then it may be time to schedule an appointment. Our team at Legacy Service can provide you with a free estimate for roofing replacement.

Don’t Miss: How To Get Rid Of Squirrels In My Roof

How Thick Should Rubber Roofing Be

EPDM roofing membrane is available in a variety of widths ranging from 7.5 to fifty feet. According to Righteous Rubber Roofing, there are three thickness options: 45 Mil, 60 Mil, and 90 Mil. A Mil is a unit of measurement denoting a thousandth of an inch. A 45 Mil EPDM roofing membrane is about as thick as a dime.

Read Also: Trailer Roof Repair Cost

Cost To Install Flat Roof

For the installation of 1,500 sq.ft. PVC single-ply membrane flat roof, expect to pay $3,000 to $5,000 in labor and $4,000 to $5,500 in materials, for a total average cost of $7,000 to $10,500. The material costs $2.50 to $3.50 per sq.ft. Labor costs between $1.50 and $3.50 per sq.ft. The total cost of the labor is generally based on the material. Single-ply membranes are the least expensive to install, while a built-up roof can be labor-intensive. Other issues that may impact the cost of the labor can be the condition of the roof, whether you have any cuts in the roof for lights or a chimney, and whether the roof needs to be reinforced to hold things like an air conditioner unit. In these instances, labor may climb as high as $10 to $15 per sq.ft.

Don’t Miss: How To Measure A Gable Roof For Shingles

Metal And Aluminum Coating Costs

Metal roof coating costs $0.50 to $4.00 per square foot, depending on how rusted it is, repairs needed, and roof accessibility. Coatings suitable for metal roofing include Silicone, EPDM & other liquid rubbers, aluminum-based blends, or Elastomeric-acrylic coatings.

Alternatively, metal roof painting costs$1.20 to $2.70 per square foot.

Flat Roof Materials Prices

Currently, the average cost of replacing a flat roof is $7,500-11,000 for a 1,600 sq.ft. ranch style home.

The most popular flat roofing membranes installed on homes across US are: EPDM Rubber, PVC and TPO.

We will review the material and installation costs for the most popular flat roof materials. We will also discuss pros and cons of each roof as well as top manufacturers, so you can select the best option for your home.

If you are ready to install a new flat roof, get free estimates from local roofing pros.

Recommended Reading: Can Solar Panels Be Put On A Metal Roof

Epdm Rubber Roofing Average Costs #

• In general, you should expect the EPDM roofing cost to be between $3.50 and $5.00 per square foot. For an average-sized roof of 1,500 square feet, that’s a total cost of around $7,000 to $10,000.
• Installing EPDM roofing on a small area, because it involves more detailed work, might cost up to $10 per square foot.
• Because EPDM roofing should not be installed over an existing petroleum-based roof , you may have to remove your existing roof at a cost of $1 to $2 per square foot.

The actual cost of EPDM roofing may vary based on your location, the complexity of the installation, the materials used, and other factors.

Acrylic Roof Coating Cost

Acrylic roof coating costs $0.50 to $3.00 per square foot installed, depending on the number of coats and sealant type. The most popular acrylic-based coatings are blends that include elastomeric rubbers, silicone, or urethane.

• Lasts 7 to 20 years on average
• Needs outside temperatures above 50°F to cure
• Comes in many colors
• Suits hot and sunny climates
• Not ideal for flat roofs
• Unsuitable for climates with heavy rain

You May Like: How To Install Rv Rubber Roof

Cost To Replace An Epdm Roof

Replacing may cost a little bit more than just applying EPDM rubber roofing to your home. If you need to remove the old roof, youll probably have to add about $1 to $2 more per square foot. Codes will vary from area to area, but if theres only one layer, you most likely wont need to remove the old roof. Two or more layers will typically require removal, though.

How To Look For A Professional Roofer To Install Rubber Roofs

Watch out for construction in your neighborhood. Its likel that you will see company vans or individuals working on sheds or garages nearby.

Alternatively, check out roofers who are certified by trade associations such as CHAS and SMAS.

Any roofers that are a part of this generally adhere to strict work standards, follow Health and Safety guidelines, and have positive trading histories.

Finally, you can also ask for personal recommendations from friends, family, and work colleagues.

Read Also: How Much Does It Cost To Tarp A Roof

Are Rubberized Shingles Worth It

Hurricane-Grade Performance. When installed correctly, rubber roofing material is incredibly strong and can withstand wind uplifts of up to 110 mph. ⦠As a result, they are an excellent option for hurricane or storm-prone states, as the shingles will survive strong storms with heavy winds.

Related

Also Check: How To Get Your Roof Fixed For Free

Get Your Custom Rubber Flat Roof Price

Our rubber flat roof price guides are calculated on figures given to us by firms and sole traders in the UK, but every project is different.

To get a custom price for your replacement roof project, tap the button below and fill in the contact form:

• Get a rubber flat roof price quickly online.
• Read vetted ratings and reviews.
• Compare the prices from three flat roofing firms.

Recommended Reading: When Was My Roof Last Replaced

What Is Rubber Roof

Rubber roofing is a type of roofing material made of a single-ply synthetic material popularly known as ethylene propylene diene monomer. The special design of rubber roofing allows it to go on flat roofs whereas the asphalt roof is suitable for sloped roofs. During the installation process, rubber roofing material can be put on top of an asphalt roof for extra leakage protection.

Asphalt shingles feature either inorganic or organic asphalt-saturated fiberglass covered with rock granules. Asphalt shingles are more common and inexpensive as compared to rubber roofing.

Flat Roof Vs Pitched Roof Cost

Flat roofs are less expensive than pitched ones, averaging between $7,000 and $10,500 for a flat roof and $7,000 and $12,000 for a pitched roof. While the initial cost may be cheaper, it is important to keep in mind that they will often require more maintenance which could cost more in the long run. Flat roofs dont drain well, leading to leaking, clogging, and repairs in the future. Pitched roofs last longer and require less maintenance over time. Ultimately, the decision between pitched or flat roofing comes down to personal preference.

Don’t Miss: How Much Should A Flat Roof Cost

Diy Epdm Roof Installation Vs Hiring A Pro

It can be tempting for some homeowners to install the roof themselves, but unless you have the necessary tools and proper experience, its best to hire professionals to do it for you. Roughly 95% of EPDM roof failures are due to poor installation. Hiring a team of experts will ensure the job is done right, helping to maximize its lifespan.

Removing A Flat Roof Cost

Removing a flat roof is usually done when it is about to be repaired, or a new one installed and is therefore usually added to the flat roof repair cost. That said, there are situations where removing the roof might be part of another project like converting the roof.

In this case, a professional will likely charge between £80 to £100 per m2. Once the removal is complete, disposal is the next problem, and while most companies will add it to the initial bill, some contractors will bill between £100 to £150 to get rid of the waste for you.

Read Also: How Much Cost To Raise A Roof