What Kind Of Roller For Roof Coating

Clean And Pressure Wash The Roof

Preparation is key to a successful coating application. Before applying the coating, the roof must be clean, dry, and structurally sound.

Remove all debris and dirt from the roof. For heavily soiled areas, loosen the dirt with a broom or brush. Clean the entire surface using a power washer capable of 2,500 to 3,500 p.s.i. with a 30-degree cleaning tip. Keep the tip about 18 inches from the roof surface and spray with a gentle sweeping motion. Use a push broom to push standing water toward the drains.

Allow the surface to dry completely before moving to the next step.

Conduct A Field Adhesion Test

Next, youll want to conduct a field adhesion test on the roof to determine which primer you need to apply.

For the test, youll attach a test piece of polyester reinforcing fabric by applying the primer, laying the fabric, and applying another coat of primer over it, leaving two inches of fabric free. Allow 24 hours to dry, then pull the fabric using the uncoated portion.

If the coating comes off the substrate clean, a primer will likely be needed if primer is left on the surface, a primer may not be necessary.

Application Dos & Donts

Generally, application of any of these systems will consist of applying one coat of rust inhibitive primer and two coats of finish with proper dry time between coats. It is important that the primer be rust inhibitive on ferrous surfaces. In the case of oil products you will most likely be looking at a red oxide metal primer. Acrylic DTMs are also available in a red oxide variety. Both types also commonly come in gray and sometimes white, but red oxide is preferred for the greatest rust inhibitive capability. Elastomeric coatings should be applied over a coat of red oxide acrylic DTM primer.

If you have a sound existing coating and are applying a coating of the same type of product over it, i.e. oil over oil, then fully priming the roof is not necessary. Spot prime any bare areas and then apply two coats of finish product over the entire roof.

Application via brush, roller, spray or a combination thereof is acceptable provided proper film build of each coat is achieved. Use a film gauge to check this if necessary.

Avoid painting too early or too late into the day, especially in spring or autumn weather. Dew is often the culprit when visual problems occur on an exterior paint film. Painting a surface too early in the morning when the weather has been very cool does not give dew time to dissipate and can result in adhesion and blushing issues. Painting too late in the day allows dew to form before the paint film is dry and can also cause blushing.

Read Also: How To Calculate Square Feet Of A Roof

Best Paint For Metal Roof In 2021 Buying Guide

If you are searching for the perfect roofing solution to keep your house cool during a hot summer, a metal roof would be your best answer. This roof is quite the trend and is highly sustainable as well. Moreover, the cost of putting it up is relatively cheap.

Once put up, it will last for years to come. To further enhance its sustainability, coating it with paint would be great. To help you with this, we have listed the 11 best paint for metal roof in 2021.

Coating a metal roof with paint not only increases its sustainability but also improves its aesthetics. Keep reading to find out which paints made it to our top 10 list!

How To Use Roof Brushes & Brooms For Cleaning

Roof brushes and brooms are in most cases to clean the roof. The following are ways you can clean your roof with the brushes.

Clearing up Debris

Debris on your roof can be in form of soil, dust, small rocks or sticks that rack up over time especially if you live a windy area or in places with lots of trees.

You can use a soft-bristle broom for light dirt like dust and stiff-bristled for debris that has piled up for a while.

Tidy up Pine Needles and Leaves

During Fall/Autumn or when there are heavy winds and storms roofs and gutters tend to gather plenty of leaves, pine needles and even branches. With the help of a brush or rake, you can easily get rid of them before they cause any noticeable damages.

Wash off Moss and Mildew

Discolored streaks on your roof indicate growth of both moss and mildew which are not only unsafe for your health but also the health of your roof. These growths are as well not visually appealing.

With a brush and some DIY solutions, you can clean the moss and mildew

Clearing Water Spots

These are the unsightly stains that appear after or during rainstorms.

All you need is a homemade solution, bleach in most cases, soft-bristled brush a brush with a squeegee attachment to clear the spots

Cleaning Roof Gutters

Just like the roof surface, gutters accumulate debris from the surrounding environment. There is also a chance that granules or other materials from your roof have spilled from the surface and into your gutters.

Read Also: How To Lay Out Shingles On A Roof

Docapole Telescopic Roof Brush For Moss & Leaves

The DocaPole stiff synthetic bristle brush kit with 30-foot multipurpose extension pole is the perfect long-handle scrubbing solution for hard-reach rooftop areas, be it you are on the ground or using regular-height ladders.

It does a good job when clearing off leaves and other debris on pitched roofs and valleys. The sturdy extending handle and stiff brush are a perfect combo for clearing moss on your roof too.

• Bi-level, multi-angle surface design maximizes surface area contact during cleaningoptimizing brush efficiency and effectiveness
• Rubber protective bumper encircles the brush head protecting surfaces where the brush is used
• Dry Use for sweeping dust and dirt
• Wet Use for scrubbing tough jobs

Long Handle Features

• High-quality, light-weight aluminum premium telescopic pole.
• 7 to 30 feet of extension providing up to 36 feet of reach with the brush attached
• Solid metal tip + 180° screw hinge tip accessory
• Rubber handle grips
• Easy-use thumb lever clasps for pole extension and retraction
• Standard/universal threaded tip for easy use with other threaded attachments

Roof Coatings On Shingled Roofs

Applying a roof coating to a shingled roof is simply a bad idea and goes against the recommendations of every reputable shingle manufacturer.

In almost no case will a roof coating be suitable for a pitched roof. One important function of shingles is that they allow your attic to release heat and moisture up through the roof.

Heating and air conditioning lead to different levels of humidity and temperature between the inside of the house and the outside air. These differences lead to condensation.

Moisture will accumulate on the underside of a sealed roof. This moisture comes from interior humidity, and will condense on the underside of the roof sheathing or roof system.

If you coat the roof, that moisture will have nowhere to go. It will remain trapped in the sheathing, laying the groundwork for dry-rot and mold.

Read Also: How To Apply Metal Roofing

How Many Types Of Roof Coatings For Rv Are There

There are several RV roof coatings for you to choose from with each one offering different levels of protection and cost. Here are some of them:

Urethane coating This type is one of the most durable RV roof coating options that you can get, which is why it is quite popular with RV owners. Urethane coating is like a hard-shell coating that can protect the roof from falling branches and other small debris that might hit it. It also does an excellent job of protecting against the elements.

However, one thing that you need to know about urethane liquid roof coatings is that it has a rather high application cost. It also means you will not be able to use your RV for at least a week because urethane coatings need at least two coats to be effective.

Acrylic Coating If your budget cannot afford complete reapplication of urethane coating, but you want to keep your RV roof in good condition, you can use a rubber roof acrylic coating in the meantime.

Getting a rubber roof acrylic coating is a good idea if you need a quick stop-gap solution for protecting your RV. Other than not lasting quite as long compared to the other options, a rubber roof acrylic coating is also UV-resistant. It can also plug up any leaks, if there are any, on your roof.

Roofing Brushes For Coating & Other Applications

In addition to cleaning, roofing brushes can be used to perform other tasks including the following.

Roof Coating

Coating brushes make applying heavy coatings easy and quick. Coatings can help protect your roof from severe weather conditions that end up damaging your roof. With roof coatings, you have an additional layer of protection from these conditions.

Application of bleaches and other roof cleaning chemical solutions

Brushes are used to apply regular bleaches on rooftops. Some solutions contain chlorine and harsh chemicals that may be harmful when it comes into contact with your naked skin.

Roof Maintenance Tools & Products

Also Check: What Causes Moss On Roof

Wire Brush Set For Roof Tile Moss

The Ecodite multipurpose brush set can cater for all your needs. This is the best set for moss on your roof tiles.

This set comes with medium-sized wire brushes for cleaning large surfaces small brushes small and tight spaces.

The bristles are made of both steel and brass. Stainless steel is optimal for wet surfaces and more aggressive cleaning while brass is used on more delicate surfaces and for light-duty cleaning.

The handles are made of high-quality European Beechwood. The handles is carved into the right size and is curved ergonomically to fit the shape of your hands. The smoothened chamferred edges make gripping our brushes a comfort.

Note: Do not be tempted to use wire brush to scrub the moss off the shingles because moss grips shingles quite strongly. Using wire brushes is likely to damage the asphalt shingles and remove their granules. These brush types are also not recommended for painted roof surfaces.

Wash The Entire Roof Surface

Before you worry about how to apply elastomeric roof coating, youll need to clean the roof thoroughly. First, remove all debris from the surface. Use a sprayer or a pressure washer for the cleaning, taking care not to disturb the roof membrane and lap seams. After you clean the roof, remove any loose materials. Let the roof dry completely before you apply the coating. Keep in mind that the roof may take up to 24 hours to finish drying.

Don’t Miss: How To Install Vent Pipe Flashing On Existing Roof

Liquid Roof Liquid Epdm Coatings

This product is not just a simple coating. It is an actual EPDM rubber roof coating that you can pour on your RV. If you are thinking of not just replenishing your RV roof, but replacing it entirely with a brand new one, then this product is for you.

Instead of fixing your old rubber roofs, get rid of it entirely and pour on a new one. Once it dries and cures, it turns into a hard, rubberized shell that is extremely flexible and can move along with the roof.

More importantly, this coating can twist, flex, and even stretch and contract. Unlike other roofing materials, this coating will not freeze and crack even in sub-zero weather.

This liquid roof RV coating is also virtually impervious to water. Although this RV rubber roofs coating might look porous when dried, it is still a watertight membrane that spans the entire roof. You no longer need to worry about water leaking into your recreational vehicle and having to deal with a severe mildew and algae infestation.

The thing that I like the most about this RV roof coatings is its efficiency at reflecting heat. It can block up to 90% of the suns heat. You can touch the roof without burning your hand, even when it is scorching hot outside.

• Goes on thick as it plugs up leaks and seams effectively
• Elastic while remaining strong and virtually indestructible
• Requires one coat to protect your RV roof properly
• UV-resistant, preventing the heat from penetrating
• Self-levels, preventing water from pooling on the roof

Fuller Brush Angle Broom

This is a both indoor and outdoor multipurpose broom designed to collect all large debris and small particles.

It comes with long lasting split-ended polypropylene bristles that are designed to gather all dirt and small particles while resisting all chemicals, oil and grease. The angling of the broom allows reaching into corners of your roof while removing dirt.

Also Check: How Much Weight Do Solar Panels Add To A Roof

Iko Permatec High Penetration Primer

• A brush or roller applied bituminous priming solution

• Watertight and weatherproof finish

• Suitable for new buildings or refurbishments

• Simple and quick to install

• 10 year materials guarantee

• Life expectancy of up to 40 years

• Weatherproof in temperatures from -40C to +150C

• Coverage rate of a 3.8 Litre tin

• Watertight and weatherproof finish

• No need to prime the substrate before use

• Can be applied to most existing roof surfaces

• Quick and easy to install Applied in 3 simple steps

• Multi-purpose, For all types of concrete and brickwork, construction plinths, septic tanks, drainpipes, wooden

• Ideal protection for all materials in contact with groundwater

• Excellent protection against corrosion

• For existing roofs

• Metal roofs should be prepared with a wire brush

• Prime iron and steel with rust inhibitive primer

• For felt, masonry and metals roofs such as zinc, copper and lead

• The coverage is dependent on application and depth of leak or crack being filled

• Modified rubber latex emulsion

• Strong bond between bitumen / asphalt and substrate

• Versatile application

Should You Fix Chips Before Powder Coating

If the part is not prepared correctly or at all, it can also cause the powder to chip easily. Powder coating does not adhere well to a completely smooth surface. It needs a textured finish or some tooth to grab on to. This is why parts should always be media blasted or chemically pre-treated before powder coating.

Recommended Reading: Do Metal Roofs Interfere With Wifi

What Can I Put On A Leaking Metal Roof

Now that youve rolled everything up and prepared each room for a better seal, its time to apply urethane cement to seal the leaks in the metal ceiling. Before doing this, make sure you have located the areas with damaged sealants and membranes and have previously applied a metal roofing primer and fiberglass roofing plaster.

How To Apply Roof Coating For Rv

Before you can start applying the roof coating on your RV, you must first prepare the surface. You first need to inspect the roof thoroughly for any damage and take note of any that you find. Also, you have to remove any silicone sealants, even the ones that are still in good condition. It is vital because nothing sticks onto silicone.

You also need to remove any loose, non-silicone caulking or sealants. On the other hand, if the existing caulking is still in good condition, you can leave them be. Once you finish picking off most of the loose caulking and sealants, you can proceed to wash the roof thoroughly. You can use a deck brush and laundry detergent so you can remove all traces of oil and grease that are on the roof.

With that, you have an assurance that the roof coating will go on evenly. Do not use dishwashing liquids or anything that contains solvents. You can also use a pressure washer with a mild detergent if you have one. It can make the cleaning process much faster.

To prevent any of the coatings from dripping down the sides of the RV, you can cover the sides using masking tape and plastic sheets. You do not need to cover the entire sides of the vehicle. Just a short apron will do.

Wait until the coating is dry and no longer tacky, which can be anywhere between four to twenty-four hours, before applying the second coating. When brushing on the new sealant, make sure that you push the material into any seams that you can spot.

You May Like: How To Standing Seam Metal Roof

Dicor Rpfrc1 Fiberglass Rv Roof Coating

The Dicor fiberglass RV roof coating excels at blocking the heat of the sun. When let to dry and cure properly, this coating turns bright white and solar-reflective, cutting down the amount of heat in the RV considerably. It is a flexible product, preventing the coating from cracking or splitting due to heat.

Also, this product has impressive coverage. A gallon of this fiberglass RV roof coating is enough to cover 350 square feet with a single coat. With that said, I was able to give my 20-foot RV three coats using just two gallons of this stuff.

Another benefit of this fiberglass RV roof coating is that it is easy to clean. Unlike rubber RV roofs that you have to scrub hard, this coating will only need a good hosing down, so you can get rid of dirt and dust. Furthermore, it is resistant to mold, algae, and mildew.

This roof coating only needs a couple of hours until it is scorched to the touch so that you can apply the next coating. You can even finish painting your RV roof in just one afternoon. Also, this product cures entirely in just a day. Hence, you can go on your trip as soon as possible.

• Dries into a super white and solar-reflective finish
• Provides a complete paint coverage at 350 square feet per coat per gallon
• Effectively resists the growth of mold, algae, and mildew
• Promotes ease in cleaning without scrubbing
• Dries in just a couple of hours and cures in just a day
• Flexible, preventing it from cracking or splitting due to heat