Thursday, February 2, 2023
HomeMetalHow Are Standing Seam Metal Roofs Attached

How Are Standing Seam Metal Roofs Attached

Standing Seam Metal Roof Costs

How To Attach Clips And Fasten Standing Seam Metal Roofing. Includes Clip Spacing

There are different types of metal roofs based on the material and panel style. Out of all the options, standing seam galvanized steel roofs are the most popular among homeowners throughout the country. The average cost to install a standing seam galvanized steel roof is $325 $775 per square. The final cost depends on the panel specifications, labor costs, and whether you need a custom design.

For this type of roof replacement project make sure you hire a reputable metal roof contractor because there are several factors involved in determining how much itll cost you. These factors include:

  • How much labor is required.
  • The type of material used for each panel.

Lock The Ridge Capping Into The Z Bar

Once the Z bars are installed, your standing seam metal roof will be ready to lock in into the ridge capping or transition metal. Ridge capping is the trim installed at the peak where the two slopes of a roof meet. On your standing seam metal roof, it will be the same type and color as your metal panels.

If your panels are coming from a low slope roof to a steeper slope, youll need transition metal instead of ridge capping. The transition metal should come down the roof and out 6 inches to ensure there’s a straight plane all the way across and then lock onto the Z bar.

Once your ridge capping or transition metal is installed, your metal panels will be completely locked in, and youll have your new standing seam metal roof.

How To Install A Standing Seam Metal Roof Step By Step

  • Begin on an exposed roof deck that has had the damaged boards replaced.
  • Install your fall prevention harnesss cable anchor at the ridge of the roof.
  • Connect the lifeline to the anchor and your harness.
  • Starting at the bottom of the roof, install ice and water shield underlayment.
  • Nail down edges.
  • Apply the next row of underlayment with its edge overlapping lower pieces of underlayment by at least 6 inches.
  • Install new drip edges with screws every 8 to 12 inches.
  • Overlap drip edge pieces by 2 inches.
  • The next step when learning how to install a standing seam metal roof involves attaching the gable trim.
  • Use tin snips and the sheet metal hand seamer/folder to cut and shape the trim pieces.
  • Screw the pieces into place.
  • Screw lock strips along the outer roof edge and eaves.
  • Space lock strips according to guidelines from the roof panel manufacturer.
  • Cut the first panel so that it overlaps the drip edge by at least 1 inch.
  • Cut the rib off the first panel and hook it into the lock strips along the outer roof edge.
  • Bend the lower flat edge of the panel so that it wraps the drip edge.
  • Dab caulk over the screw heads securing the lock strips as you attach panels.
  • Continue snapping panels into place on the lock strips.
  • At the top of the panels along the ridge line, cover the gaps with Z bars.
  • Once all Z bars are installed along the ridge, cut the ridge capping to fit the roof line.
  • Install the ridge capping.
  • Consult the Manufacturers Directions

    Also Check: How Large Is A Roofing Square

    Everything About Standing Seam Metal Roof Types: Profiles Dimensions Materials And More

    There are many types of standing seam metal roofs. These vary in profile, size, material, price, and color. The choice you make will affect the overall cost, durability, and the amount of labor required during installation.

    That’s why it is essential to learn about the different types of standing seam metal roofs available and their applications.

    Having a variety of options for the consumer is a great selling point. However, it is easy to get lost when there are multiple variations to consider. In this article, we examine the different types of standing seam metal roofs available on the market. We also tell you how to choose the most suitable one for you.

    Ideal Roofing Underlayment For Metal Roofs

    Standing Seam  Interlock Metal Roofing

    If you want to install a standing seam metal roof, you must use an underlayment explicitly designed for metal roofs. These underlays are vapor-permeable, resistant to high temperatures, and dont stick to metal panels. You should choose a high-temperature underlayment that meets or exceeds industry standards. Our experts recommend Henry® Blueskin® PE200HT High Temperature Roof Underlayment and APOC Weather-Armor HT³.

    As a homeowner, you should discuss all these aspects with your roofing contractor before buying any materials yourself. Since every home is different, the contractors will be able to tell you the ideal metal roof components only after a full roof inspection. After years of experience with metal roofs, weve found a few common concerns among homeowners that you should know before getting a new metal roof.

    Recommended Reading: How To Clean Roof Tiles

    Basic Labor Cost To Complete Standing Seam Metal Roof Installation

    It varies by region, but the cost of labor and the time it takes to complete your roofing project impacts your final cost. The larger your roof is and the more crew members you need for installation, the more your standing seam metal roof will cost.

    Roof accessibility can also impact the cost of your roof installation. If your roof is difficult to access it may take longer for the construction crew to tear off your old roof and install your new metal roofing.

    What To Know About Standing Seam Installation

    If youre interested in our standing seam roofing products, they are appropriate for a wide variety of applications. These panels can be a great choice for residential buildings and are commonly used for roofing or siding. Standing seam panels can be retrofitted on existing homes by tearing off the existing roof or installed during new construction. Components of a standing seam metal roof:

    • Roof Decking: Wood boards that frame the roof.
    • Metal Panels: PVC paint-coated steel panels that provide protection from the element and aesthetic appeal for the home or structure.
    • Lock Strips: Tacking that securely attaches the metal panels to your roof.
    • Clips: Concealed fasteners used to attach panels.
    • Underlayment: Felt material layered over decking for extra protection from high heat, ice, and water.
    • Z Bar: Metal flashing that covers the gap space at the end of the metal panels.
    • Ridge Capping: Trim for the peak of sloped roofs.

    The installation process begins by adding lock strips at the rakes and eaves. These strips are what your panels fasten to using the concealed fastener system. They are designed to be the same color and gauge as your panels for a seamless appearance.

    Also Check: How To Tell The Difference Between Tpo And Pvc Roofing

    Diy Versus Hiring Roofers

    Installing a standing seam metal roof is not a straightforward process. It involves a lot of tedious work and requires specialized skills and experience. To get the best results, it is advisable to seek the services of highly trained roofing contractors to handle the task on your behalf.

    If you are a regular DIYer with a proven track record, however, consider looking up tips for installing a standing seam metal roof.

    Standing Seam Vs Asphalt Shingles

    How to Install a Standing Seam Metal Roof from Start to Finish

    Metal roofing is far more durable than asphalt shingles. Standing seam metal roofing is also more energy-efficient, long-lasting, and low-maintenance than asphalt shingles.

    That being said, asphalt shingle roofing is far less expensive and much easier to install than standing seam metal roofing. If youre keeping to a strict budget, asphalt shingles will likely suit your needs better.

    Read Also: Do Metal Roofs Attract Heat

    Types Of Standing Seam Metal Roofs

    Standing seam metal roofs are a popular roofing choice for residential, commercial, and industrial projects. This versatile roofing option gives owners many advantages. Expect the initial investment to bring energy savings, a wide scope of design options, durability, impressive longevity, and more.

    If youre trying to choose between the different types of standing seam metal roofs, its best to learn exactly what standing seam metal roofs are as well as the advantages and disadvantages of each type.

    Standing Seam Metal Roofing Systems

    For the best of the best when it comes to metal roofing options, standing seam panels from Metal Sales are a leading choice. These panels feature the same great eco-friendly roofing options with long-lasting durability as any other metal roofing product in our catalog, with the added benefit of enhanced aesthetics and clamp attachments. Standing seam panels take care of the curb appeal problem that traditional metal roofs come with, making them a great choice for residential use.

    Don’t Miss: How Much Does It Cost To Reseal A Rv Roof

    How Much Standing Seam Roofing Costs

    Standing seam cost will require an onsite inspection to determine the installation feasibility and other related information. Normally, a complex installation will cost an additional 10 percent in material and labor costs. When quoting a metal roof be sure to include delivery, underlayment, counter flashing, soffit and vents, stack covers and fasteners.

    For example, standing seam 29 gauge 12 will have an approximate cost of $2.45 per linear foot while the 29 gauge 16 panel is near $2.75 per linear foot. However, these costs are approximate and might represent the actual costs of standing seam panels.

    What Are The Upsides Of Standing Seam Metal Roofing

    Standing Seam  Interlock Metal Roofing

    Roofing alternatives were limited for most households, at least for a time. When discussing such possibilities with their roofing contractor, they frequently narrowed it down to the most basic, believing that any alternative would be more expensive. As improvements in the field have made many solutions more cost-effective, many homeowners have discovered standing seam metal roofing to be a highly appealing and practical roofing choice.

    Recommended Reading: Don Snider Roofing West Chester Ohio

    What Sizes Are Standing Seam Metal Roof Panels

    Apart from the different profiles, standing seam metal roofs also come in varying sizes. Due to their unique installation methods, the panels usually feature custom sizes, either roll-formed beforehand or on-site. The size you choose will depend on the type of profile, performance requirements, and personal preferences.

    Choosing The Right Standing Seam Roofing Panel

    The following factors should be taken into consideration when deciding on the right standing seam roofing panel:

    • Desired aesthetic

    Knowing what kind of panel system your project is using and whether or not stiffening ribs are being used will get you closer to the right type of standing seam panel for your project.

    There are still other panel choices to make that greatly affect the appearance and performance of the roof, including:

    Compare the different types of metal roofing to see which is best for your project by reading:

    Don’t Miss: When Will Insurance Pay For A New Roof

    Advantages Of Exposed Fastener Metal Roofing

    Less expensive One of the most significant benefits of choosing exposed fastener metal roofing is that its less expensive, especially when compared to standing seam systems. There are many reasons for the lower price, including:

    • Fewer metal panels need to be purchased.
    • Less labor is needed because the wider panels cover the roof faster.
  • Thinner gauge panels
  • Exposed fastener systems generally use 29 to 26-gauge metal, which is thinner and cheaper.
  • Lower quality paint systems
  • Polyesters and silicone-modified polyester paint systems are popular choices for exposed fastener because theyre less expensive than the polyvinylidene fluoride paints typically used on standing seam systems.
  • Less accessories purchase
  • Exposed fastener systems are directly fastened down to the structure through the metal, so theres not a necessity to buy any kinds of clips. This can save on costs for the buyer.
  • Exposed fastener systems usually use less accessories and different flashing products, like foam closures, to install the roof system. Again, this cuts down on costs and speeds up the installation.
  • No Seaming Required Exposed fastener systems do not require hand or mechanical seaming of the two panels. Most systems use a lap seam where the edges of each panel overlap the one adjacent to it and are then fastened down together at the same time. This is often why exposed fastener metal roofing tends to be considered the less labor-intensive option when compared to standing seam metal roofing.

    Symmetrical Vs Asymmetrical Panels

    How To Install A Standing Seam Metal Roof

    There are two main types of standing seam metal roofing panels available, symmetrical and asymmetrical panels. Symmetrical panels are the same on both the left and right sides of the panel. In comparison, the legs on asymmetrical panels are different. The panel design carries implications ranging from install speed to cost and even future repairability.

    Symmetrical systems, like the 138T and 238T roofing systems, lead the industry due to their significant initial and long-term savings. These savings stem, in part, from factors like labor savings, the reduced chance of damage from leaks, and ease of future repairs.

    For starters, asymmetrical panels must be installed from one end of the building to the other in one by one sequence. However, the installation of symmetrical panels starts at any point on the roof. This difference means installers can skip over penetrations and come back to them later or even have top installers work on intricate details. At the same time, the rest of the crew continues sheeting the roof when working with a symmetrical panel system. This flexibility during installation leads to a higher-quality roof system.

    Symmetrical panels also have less scrap and reduced costs than asymmetrical panels because installers can use the drop cut off of one panel on the opposite side of the roof plane.

    Don’t Miss: How Much Does It Cost To Replace Roof Fascia

    Standing Seam Metal Roof Guide

    The term metal roofing explains the concept of roofing as a whole and explains all the options, products, and choices that homeowners have when it comes to roofing their home. It covers procedures and concepts of metal roofing which also includes metal shingles or tiles used in the process or the exposed fastener roofing system or the standing seam metal roofs. In this article we cover the important concepts you should know about the seam metal roof as it is one of the most popular options for homeowners today.

    How Do You Attach The Deicing Cable To A Metal Roof

    A deicing cable is a thin nylon rope that acts as an ice protection barrier to prevent ice dams and snow buildup on the roof by riding along the roof flashing.

    It can be used in any season, and when used properly, it can save you significant energy costs while protecting your roof from water damage in the winter.

    Recommended Reading: How To Soft Wash A Shingle Roof

    How Do You Attach Christmas Lights To A Metal Roof

    Hang light strings with magnetic clips or hooks. Individual clips that attach to the back of each light may be used, or hooks can be used to thread them along your metal roof sheets.

    Theyre sturdy enough to withstand most weather conditions yet lightweight enough to be removed after the holiday season is over. Its a low-maintenance way to add whimsy to your metal roof.

    What Is A Standing Seam Roof

    Standing Seam  Interlock Metal Roofing

    Intricately designed metal roof panels with standing seams keep fasteners hidden. The roof fasteners of this metal panel roof are protected against UV rays, wind, rain, snow, and other factors that damage the roof. As a result of this design, standing-seam roofs are much more durable than other metal roof types.

    Standing seam metal roofs are easily distinguished by hidden fasteners and raised seams that rise above flat panels. One of the advantages of this metal roofing is that it can also be used on walls. Many homeowners only know that it is used on roofs.

    You May Like: Do It Yourself Metal Roofing Kits

    Standing Seam Vs Screw

    Standing-seam and screw-down metal roofs each have their place, and its important to consider the pros and cons of each, along with what youll be using them for, before making your purchase.

    As you begin to remodel or build, youll probably face the question of what kind of roof you want and whether it needs a ridge vent.

    If youve landed on a metal roof, sifting through the many different metal roofing options can be challenging and overwhelming. Two of the most popular metal roof types are screw down metal roofs and standing seam, or exposed fastener metal roofs.

    The right choice for you will depend on your budget, build-speed requirements and the lifespan youre looking for out of your roof. Here well go into more detail on the pros and cons of each so you can make the right decision for you.

    The Right Attachment Solutions

    To protect your roof and your roofs warranty, standing seam metal roofs should always use non-penetrating seam clamps when attaching roof accessories. Learn More.

    Our clamps mount a wide range of rooftop accessories to your standing seam roof with incredible holding strength all without creating any holes in the panels or the roof. Learn More.

    Read Also: How Much To Reshingle A Garage Roof

    Disadvantages Of Standing Seam Metal Roofing

    Higher Cost One of the most significant drawbacks to standing seam metal roofing is the fact that it can be more expensive when compared to other metal roofing types, especially exposed fastener systems. However, its not always the highest price, as metal shingles and other stamped metal materials tend to come in at a higher price, even though stamped materials are often made from 26 gauge or thinner substrates.

    Less Qualified Contractors Available Finding a contractor who is qualified, skilled, and experienced in metal roof installation is crucial, especially because standing seam systems require careful craftsmanship. Since standing seam installations may be considered too complicated or tedious, there are far fewer contractors to choose from who have a proven track record and relevant experience.

    Labor-Intensive Installation Process For exposed fastener systems, its a relatively simple process of putting the material on the roof deck and nailing/screwing it down. For standing seam, its much more complex and labor-intensive, and may include:

    • Correctly spacing the clips on the panel legs and fastening each one down.
    • For snap-lock systems: Aligning the panels and snapping the legs together.
    • For mechanically seamed systems: Aligning the panels and hand or mechanically seaming the panel legs together.
    • Making any necessary slits in the metal to account for roof plans, geometry, and flashing areas.

    RELATED ARTICLES

    Most Popular