How Much Does A New Roof And Gutters Cost

Cedar Shingle Roof Replacement

A cedar rooftop for your Carmel home can range anywhere from $6000 to $30,000, depending on the size of your roofing system and the type of cedar roofing material that you install.

Cedar rooftops are available in these variations:

• Red cedar

Cedar roofing per square foot costs about $6 to $9.50.

This is how much you can expect to pay for your roof line:

1,000 sf roof / 10 squares = $6000 to $9,5001,500 sf roof / 15 squares = $9000 to $14,2502,000 sf roof / 20 squares = $12,000 to $19,0002,500 sf roof / 25 squares = $15,000 to $23,7503,000 sf roof / 30 squares = $18,000 to $28,5003,500 sf roof / 35 squares = $21,000 to $33,250

What Do Insurance Adjusters Look For On Roofs

An insurance adjusters job is to determine what damage to your roof will be covered by your policy. When an adjuster arrives, they will spend time inspecting your roof in detail. Their goal is to determine how the damage was caused, whether it was pre-existing and whether you took the proper steps to prevent damage to your roof.

Before an insurance adjuster arrives, it can be helpful to locate as much damage as possible on your own. Additionally, you canhire a roofing contractor to also help you inspect and assess the damage.

Cost To Redo A Roof With A Different Material

Redoing a roof with a different material runs from $7,000 to $12,000 and more. This rate includes the tear-off.

If you are replacing one product with another of the same type, you usually have no major concerns. However, if you are replacing a lighter product, such as asphalt, with something heavier, like slate or clay tiles, you’ll want to be sure that your framing can support it. Before going with heavier option, have your frame and trusses inspected and strengthened if necessary to make sure they can support the weight of the new product.

Potential added elements of this project include:

• Inspection

Get a Quote From a Shingle Replacement Pro

Also Check: Trailer Roof Repair Cost

How Contractors Determine The Price Of A Roof Replacement

After inspecting the roof and speaking with homeowner, a contractor will draw up an estimate for the project. Estimating takes several important factors into consideration including materials, complexity of the job and the amount of time needed to complete the job.

Typical Breakdown of Factors:

Roof Size Roofs with steeper slope have a larger surface area than roofs with less slant.

Roof Slope Steeper sloped roofs are more dangerous and more difficult to work on than flat roofs.

Roof Complexity A roof with more level changes, hips and valleys, and add-ons, such as dormers, will be more expensive than a simple roof.

Existing Layers Its sometimes possible to install over existing shingles, but this lowers the lifespan and can cancel the warranty. Its better to do a complete replacement. The more layers that must be removed will increase the price.

Debris and Waste Removal Asphalt shingles, the most common material used, are considered hazardous waste, and must be disposed of properly.

Materials The type of new material that will be installed, such as asphalt shingles, steel shingles, slate shingles, etc.

Building Materials This covers all other materials needed to replace a roof including boards and plywood for the roof deck, nails, drop cloths, tarps, staples, calk, etc.

Roof Underlayment and Accessories Underlayment and accessories are part of a system that makes the roof complete and watertight.

See what local pros charge

Removal And Reinstallation Of Gutters

Having the gutters removed becomes essential during roof replacement if the gutters are attached to the roof. If the gutter comes in the way of the new roof installation, it will most likely sustain damages, particularly along the edges. The roof can never be 100% sure that the sealing is fully intact as it was before the installation. That is why it is a good idea to have the gutters removed first, have the new roof installed and then reinstall the gutter system.

There are multiple benefits of taking this route, which is getting the gutters removed before the new roof installation.

• Have a better look at the components of the gutter system
• Ensure proper seals along the edges of the gutters
• Eliminate the risk of dents or scratches to the gutters
• Get the best possible new roof installation

First of all, getting the gutters removed paves the path to an ideal installation of the new roof. This is actually the natural process that roofers should follow remove the gutters and then install the new roof.

Roof replacement is a tedious, time-consuming project. The process involves multiple steps including the installation of the roofing accessories. Once the gutters have been removed, the roofing technician will be able to properly install each accessory that goes into the roof replacement. If the gutters are not removed, the roofer will install the ice and water shield over the gutter. This can create leakage issues later and the new roof can sustain water damage.

Don’t Miss: Roofing Cost Los Angeles

Cost To Replace Gutters And Fascias

Gutters are designed to steer rainwater and other precipitation away from the roof of your house. It is essential to keep your gutters unclogged and working properly to avoid damage to your roof and house foundation.

On the other hand, fascias are parts of the roof that can be seen from the outside. It attaches the gutter to the roof of the house.

Normally, when replacing your fascia, you also replace your gutters. Typical costs for replacing your gutter and fascia on a small-sized home is around $4,300.

But it varies depending on the number of pieces replaced and the size of your home. For 90 metres of guttering and fascia, the average cost is around $6,100 in Sydney.

Get Quotes from Gutter Replacement Expert?

Calculating Patio Roof Costs

The average cost to install a new patio roof ranges from $1,037 to $2,445 depending on the size and materials used. A small living room patio with asphalt roofing installed will cost $605 while a large outdoor dining patio with a metal roof costs $3,712. Of the four most common patio styles, the two that are generally considered large enough to warrant a roof include:

• Living room patio – Average size is 16 by 18 288 sq. ft
• Outdoor dining patio – Average size is 12 by 14 168 sq. ft

Patio Roof Costs

• Class A 21 to 45 feet long
• Class B 16 to 25 feet long
• Class C 20 to 35 feet long

Also Check: How Much Is A Shingle Roof Per Square Foot

What Do Their Reviews And Referrals Say

When choosing your roof replacement contractor, it is important to hear what former customers say about their work.

If you know someone who has used them before, ask them how their experience was with them.

• Were they happy with their roof replacement?
• Were they satisfied with the availability of the roofers?
• Did they clean up well and make sure that all of the nails, tacks, and trash were removed from your yard?
• Did they make sure that your landscaping wasn’t damaged?

If you don’t know anyone that has had a new roof installed recently, look at online reviews. A quick Google search should give you the reviews of the particular roof replacement company you’re looking for.

Read through the reviews and see what they have to say about the roofing company’s work.

It is important is that you read the reviews carefully and see if there is a pattern. For example, a company may have only a handful of reviews. They have several 5-star reviews and a few 1, 2, and 3-star reviews, but in the one-star reviews, you notice that everyone says how they didn’t clean up well. Then you see it mentioned in some of the 2 or 3-star reviews as well. This could show you that there is a problem with that particular portion of the job. And it’s something you can ask your roofer when you talk to them about it.

Once you’ve looked at the reviews on the local roof repair contractors, there is another aspect you should look for.

Are they certified?

Average Cost To Replace A Roof By Size

The size of your home and roof influences your roof replacement costs. Roofs come in many shapes and sizes, but the general rule is this area is roughly 1.5 times your square footage. So, a 1,000 sq.ft. home has a 1,500 sq.ft. roof. Roofing material is sold and installed by the square, which is 100 sq.ft. If your measurement equals 1,350 sq.ft., you should purchase 1,400 sq.ft. of material. These figures are a guideline. Ensure a professional measures it for the exact dimensions. Costs for replacement are for the and only and do not include new decking or reinforcement for heavier materials.

The average cost range per roof square replacement is $350 to $900 per square. This range encompasses most popular materials. Asphalt shingles are at the low end, aluminum and architectural shingles are mid-range materials, and concrete and metal shakes are at the high end. Flat roofs may have lower-cost materials, while some high-end materials like slate and wood shakes may have much higher costs.

Also Check: How Much Roof Overhang On Shed

Hiring Your Gutter Systems Installer

Here on HomeGuide, we have gutter installation professionals with experience in installing seamless and sectional gutters in all material types. To find the right installer for your gutter system, use the list below to help find the right gutter company for your project.

• Are A/A+ rated with the Better Business Bureau
• Been in business for at least five years
• Have great reviews on HomeGuide and Google
• Are insured and bonded and have good reviews
• Offer warranties on your gutter installation for labor and parts
• Can show examples of similar work they have done in the area
• Include full cleanup in the price

Getting house gutters installed can save your home from a lot of future repairs, and prevention is always cheaper than a cure. While its possible to install gutters as a DIY job, hiring a professional can ensure the job is done right.

Get free estimates on HomeGuide from trusted gutter installation companies:

Seamless Gutter Installation Costs

Seamless gutters, which are also called continuous gutters, are made from a coil of guttering that can be fabricated to the exact measurements of your home. Most homes in the U.S. have seamless gutters installed. However, some homeowners opt for cheaper, DIY sectional gutters. Seamless gutters generally cost between $6 and $30 per linear foot, depending on the material of gutters you choose.

Don’t Miss: Metal Roof Gable Overhang

The Complexity Of The Roof

The next element that factors into how much it will cost to replace a roof is the complexity of the roof itself. Not surprisingly, the more complex the roof is, the higher the cost to replace it.

Each section of a roof is called a facet. A standard A-frame roof will have two facets one section on each side of the home. Other homes, though, will have multiple facets. The more facets there are, the more difficult the job will be, which will be reflected in the labor cost of the project.

Homes with multiple facets are often some of the most architecturally beautiful designs available today. While they create a visually-pleasing design, they provide headaches and challenges when conducting a roof replacement project.

Should Replacing Your Roof And Gutter Repairs Go Hand In Hand

| Roof Maintenance, Roof Repair, Roofing

Homeownership rate in the United States was at 64.4% in the second quarter of 2018. Thats a steady increase from the 63.6% rate back in January 2017.

This increase in home sales came with a higher demand for roof installation. But new homeowners arent the only ones who sought and are seeking new roofs. Those hit by the weather disasters of 2018 also demanded roofing-related services.

If youre in the same situation, youre likely wondering if replacing your roof also means getting a new gutter system.

After all, a new roof for homes within the Bay Area can already cost an average of $9,409. Add new gutters or repairs to that, and your costs can go up hundreds, if not thousands of dollars more.

This depends on several factors, which well discuss in more detail below. So, keep reading before you shell out more cash than necessary!

Recommended Reading: Roof Cost California

Making The Best Decision For Your Roof

Once you have had the time to weigh the costs and benefits of each roofing material, youre ready for the most important step of the replacement process. This important step is finding a professional roofer to trust with your roof replacement.

A quality roofing contractor will play a role in the overall cost of your new roof. But before you find the cheapest roofer to do the job, keep in mind what youre getting. If it is significantly cheaper than the other guys, odds are youll be paying that extra cost down the road when the roof fails shortly after installation.

To ensure your home is protected by a properly installed roof , hire a quality roofer for your home. If you are in or near Carmel, IN, make sure to reach out to Impact Roofing for your new roof! We would love to work with you!

Cost Estimates For Gutter Replacement

There are different types of gutter replacements and here are their replacement costs:

Fascia

The cost estimate is around $2,500 to $5,000 for a simple fascia installation on a mid-sized home. Take note, that there is an extra cost if all downpipes and covers are to be replaced.

Furthermore, gutter replacement may require removal and disposal jobs which is an additional cost as well. You can pay around $6,000 to $8,000 for complex jobs on larger homes.

Square

A square gutter is great for places that have frequent heavy rains because it is specially made to catch rainwater. Most homes have this kind of gutter because of its durable quality.

These gutters are popular for homeowners who do not want their gutters to be too noticeable in their homes. Prices may vary, but the estimated replacement cost is around $30 per metre.

Quad

Quad guttering is suitable for areas where there is dense rainfall. The estimated replacement cost is around $20 t0 $30 per lineal metre.

Round

Half-round guttering is a style with a curved base. It can withstand heavy rainfall especially if you use the oversized type. The average replacement cost for a round gutter is around $20 per lineal metre.

Also Check: Rv Rubber Roof Repair Kit

Why Is Gutter Replacement Important

Not only do new gutters help prevent house leaks and gutter leaks that will affect your yard and surrounding foliage, but a house with old and damaged gutters could be at risk of foundation problems from moisture issues.

Gutters protect your home from both rainwater and groundwater and direct the flow away from your house. If your gutters are not doing their job, they can allow water to seep into both your foundations and your walls, weakening your home and potentially causing wood rot to homes built with timber.

If you have cracked gutters, this is a major cause for concern and a reason to prioritise getting new gutters installed. Other signs to look for that it could be time to replace gutters are:

• Peeling paint

Cost To Install Gutters

Read Also: Where Do The Screws Go On A Metal Roof

Concrete And Clay Tile

Only about 1% of Fellers roof installs are made from clay and concrete tile. Although tile roofs are aesthetically beautiful and cost about the same as metal, the main challenge is that the structure of a home has to be strong enough to support the heavier weight. In most cases, its not possible to switch out an asphalt shingle roof for a tile roof. Basically, the house had to have been built for it, Feller explains.

Tile roofs can last up to 100 years if they are well installed and if the installer uses a good underlayment . The underlayment on tile roofs is critical, as the tiles may shift and water can easily get under the tiles, warns Feller. One big advantage is that tile roofs are easy to repair: Even if you have to replace all of the underlayment, you can generally remove the tile and then reinstall it.

Per HomeAdvisor, the average cost range for a tile roof is $7,874-$23,076.