Saturday, May 18, 2024
HomeEditor PicksWhat Is The Best Roof Coating For Mobile Homes

What Is The Best Roof Coating For Mobile Homes

Geocel 28100v Pro Flex Rv Flexible Sealant

Mobile Home how to stop metal roof leaks with STA-KOOL elastomeric coatings

The last but not the least recommended product is the Geocel 28100V Pro Flex RV Flexible Sealant. The flexibility of this sealant is one of the reasons behind its popularity at present. It is flexible in the sense that it works appropriately for different models and makes of vehicle.

It is known for sticking well to the surface where you plan to seal. While its not a water-based sealant, note that it tends to stick really well while also having a thick enough texture that wont run after application.

You will also realize how hassle-free it is to use this sealant once you notice how it appropriately works with other caulking and sealing tools. One more thing noted in this product is its ability to hold up in different weather conditions, particularly winter.

It is effortless to work with. Furthermore, it tends to remain pliable for a bit after each application. With that benefit, you have more time to press and shape it.

Mobile Home Roof Seals Ranked

No matter where your mobile home ends up, the sky will always pour some rain, or the sun will be too hot. That said, you need the right mobile home seal coat to keep your manufactured homes metal roof in tip-top shape. Here we have mobile home roof seals ranked from high-end to cheaper that are recommended to get the job done.

Before we get into the ranking guide, know that you should apply a fresh mobile home roof sealant about once every two years depending on your climate. Its important to take the seasons into consideration before applying your new roof coating. Youll want to ensure that the roof is warm, dry, and dirt-free.

A roof that is not properly taken care of will develop rust and start to crack. This is very common on older mobile homes that metal roofs. Roof coating helps in sealing mobile home roof cracks. Re-sealing your roof will help you protect your home from having any water seep through the roof. It also prevents the roof from absorbing all the heat, thus making it more prone to damage.

Its best to apply the new coating during the spring and summer months. Fall is warm enough, but depending on where you live, there may be branches and leaves falling onto your roof while its drying. The warmer the weather, the quicker for the mobile home roof sealant to dry.

There are a wide number of mobile home roof seals to choose from, so we gathered a few of the best for you! Want to know the best seal coat company to use? Continue reading!

What Is The Best Roof To Put On A Mobile Home

4.5/5TPOTPOTPO

Roof over materials

  • Metal/Aluminium roof. Aluminum is the most popular type of roof over for mobile home users and with good reason. Here are the advantages to installing a metal roof over:
  • Asphalt shingles. Asphalt shingles have a bit of a bad rep.
  • PTO or rubber membrane roof over. Firestone defines TPO as:

Likewise, what is the roof of a mobile home made of? Mobile homes built before June 1976 typically have flat or bowed roofs, usually covered with sheet metal or asphalt coating. Mobile homes manufactured after 1976 generally have more pitched, or peaked, roofs.

Then, how much does a new roof cost on a mobile home?

Mobile Home Roof Replacement CostsMobile home roofing costs $1,000 to $3,000 to replace. These calculations are for single-wide size homes, which are 600 to 1,300 square feet. Two of the most popular options for materials are metal and asphalt.

How do you put a roof on a mobile home?

A mobile home roof then is built basically the same way you would raise a roof on a wooden frame structure.

  • Build End Frames. Begin building your roof by starting at each end.
  • Build Rest of the Rafters.
  • Lay Down Plywood Sheathing and Roof Felt.
  • Install Shingles and Soffit.
  • Also Check: How Much Weight Can An Old Mobile Home Roof Hold

    Jetcoat Cool King Reflective Acrylic Roof Coating

    • LONG-LASTING PROTECTION Reduce energy fees and lower maintenance costs with Jetcoat Cool King Reflective Acrylic Roof Coating.
    • VARIETY OF SURFACES Apply this coating to EDPM rubber roofs, polyurethane foam, APP and SBS modified bitumen, asphalt, mobile homes and RVs, concrete, wood and more.
    • MAXIMUM COVERAGE Just one gallon of this roof coating will cover approximately 50-70 square feet per coat.
    • EASY APPLICATION When applying this elastomeric roof coating, the temperature must be a minimum of 60°F and rising.
    • DRYING TIME This reflective roof coating dries to the touch within 2-3 hours.

    Solutions For Peaked Roofs

    Mobile Home Roof Coating: Do It Yourself Guide on Applying ...

    Newer manufactured homes and double-wides with truss roof systems can be reroofed with some of the same materials used for flat and bowed roofs on older mobile homes. Shallow pitches can easily accommodate membrane roofing, but because pitched roofs are more visible, the preference here is often for more attractive roofing materials similar to those used for traditional homes. Thus, membrane roof-overs are relatively rare on peaked roofs, with metal and traditional shingles used much more often. Techniques for repairing and re-roofing are exactly the same as is used in traditional on-site construction.

    Also Check: How Many Screws Per Square For Metal Roofing

    Dicor Rpcrpq Epdm Rubber Roofing Coating

    It is also advisable for you to check out the Dicor RPCRPQ. It serves as an EPDM roof cleaner or activator, which also works as the primary part of a 2-part system, which is the combination of the use of an acrylic coating and the cleaner or activator. The cleaner, therefore, aims to prepare your roof.

    The acrylic coating, on the other hand, focuses on providing a longer-lasting and excellent protective barrier. When the two work together, expect them to produce a lock and key effect. This can then make the coating bond tightly to the old RV roofing.

    With the ability of this Dicor rubber roof coating to clean and prepare your EPDM RV roof, it is possible for you to take advantage of maximum adhesion once the second part of the coating will take place. You will also instantly realize what a great investment it is once you notice its ability to extend your EPDM rubber roofs life.

    Another advantage is its wide coverage. Each quart of this product is actually capable of covering up to 125 square feet. It also tends to dry quickly while being safe to use as it is devoid of any harmful petroleum distillates, citric ingredients, or abrasives that might damage your roof.

    What Are The Factors That Go Into Choosing A Type Of Roof Coating

    The current condition of your roof is the main factor in deciding what roof coating material should be use. Other factors such as climate, sun exposure, heat exposure, and general location of the roof are important as well. A roofing contractor will also inspect where water ponds the most on your roof and how your roof slopes in order to make a decision. Different coatings offer different perks, such as durability, sun reflection, waterproofing, etc. If you dont live in an extremely hot climate, you probably wont need a highly reflective roof coating to keep your business or home cool.

    You May Like: Self-supported Roof Over Mobile Home

    Wood Roofing For Homes Pros And Cons

    A wood shingle roof can add great curb appeal to your mobile home.

    Wood roofing on a mobile home is ever popular and can be rustic or modern depending on the overall look of the exterior of your mobile home. This type of material is known for its ageing beauty, however, this isnt always desirable because it requires more maintenance than other types of materials such as metal.

    What Are The Most Effective Mobile Home Roof Coatings

    Benefits of White Roof Coating | The Home Depot

    A device that accommodates a wide range of variables is vital for a business like yours that handles varying sizes, weights, heights, and so on. Although it is small and cheap, the product is of quality despite its size and price.

    With mobile home roof coatings, today’s office tasks can be performed in many ways.

    Also Check: New Roof Cost California

    Which Roof Coating Performs Best

  • Roof Coatings 101
  • Which Roof Coating Performs Best?
  • Its a question we get asked from time to time: which roof coating performs best? The short and simple answer isit depends. Thats because there are just too many variables to consider when it comes to the performance, longevity, and suitability of an elastomeric roof coating.

    Below, we provide a comprehensive overview of the benefits, chemistry types, and physical properties to look for in an effective coating solution.

    How To Approach Coating Your Roof

    Its important to note that these are just a few of many roof coatings. There are more than a dozen types and still more variations of those types. Furthermore, roof coatings are a tough task.

    We can help you out with all your roofing needs here at Ridgeline Construction. From Huntsville, Alabama, to Pensacola, Florida, were equipped to prepare your roof for anything that might come your way.

    Read Also: Roof Replacement Cost In California

    Our Recommended 10 Best Mobile Home Roof Coating Reviews 2021

    • The Product Is 5Gal White Roof Coating
    • Easy And Simple Use Kit
    • The Product Is Manufactured In China
    • Brand Name: Henry
    • The Product Is Henry 587, Gallon, White, Roof Coating
    • Elegant Design And Smooth Finish
    • The Product Is Manufactured In China
    • Brand Name: Henry
    • Easy to Install: Clean surface and let dry completely. Apply tape to the surface. Once installed, go over again rubbing tape into place using moderate pressure.
    • Waterproof & 100% UV stable: ultra sticky white sealant tape permanently stops RV leaks
    • Widely used on surface: RV roof, awning, metals, EPDM, PVC, Hypalon, TPO, brick, concrete, stone, tile, modifieds, and wood.
    • Ultra high elongation: allows for easy, maintenance free sealing of all cracking roof seams, leaking skylights, vents, and awnings.
    • 100% RISK FREE PURCHASE: If you are not satisfied with Heart Horse repair seal tap, were very happy to either provide a no-questions-asked Refund or Replacement. Order today risk free!
    • It is easy to use
    • It is highly durable
    • Use on metal, built-up roofing, rolled roofing, concrete, EPDM & wood
    • Designed for low-slope roof maintenance
    • Non-toxic, eco-friendly, low VOC & made in the USA

    Comparison Chart Of Top 10 Elastomeric Roof Coating For Mobile Home

    Roofers Choice 4.75 Gal. 67 Kool Top Fibered Mobile Home ...
    No
    Kidde Fire Escape 2-Story Ladder 9.8
    AMES MSS1 1 Gallon Maximum Stretch Roof Coating 9.8
    Rust-Oleum 301994 710 Elastomeric Roof Coating 5 gal 9
    Heng’s 16-47032 Roof Coating Elastomeric – Quart 9
    GARDNER-GIBSON 6245-GA Series 4.75GAL Roof Coating 8.8
    Jetcoat Cool King Reflective Acrylic Roof Coating 8.8
    GARDNER-GIBSON 6241-GA Series 3.6QT ALU Roof Coating 8.6
    Gardner Series SK-7701 1G White Sta-Kool 770 Elastomeric Roof Coating 8.2

    Read Also: Skylight For Metal Roof

    Cleaining Up The Surface

    You will need to use sandpaper and wire brush in order to remove your old coating, and to fix any bumps in your surface. Use a broom and clean the entire surface, since you need it to be smooth and clean in order to apply your coating and protect your roof. Take special care while you clean up the seals next to j rails, flashing and roof seems.

    Apply Mobile Home Roof Coating Yourself

    Start by inspecting your roofs condition to ensure there are no repairs or damages before starting. Next, remove any dirt, debris, or blockages covering the roof by using a broom. It should be spotless. You may also consider power washing your roof to remove sir and grime settlement. If you do power wash, be sure to allow the roof to dry before continuing ultimately. If dirt and grime remain on your roof, the coating will have difficulty properly bonding.

    Not all roof coatings can be applied on the top of the original layer. Check the instructions with your specific coating. If the coating requires the removal of prior coatings, you can use sandpaper to remove it.

    Check once more to ensure no minor repairs your roof might need to be fixed, such as loose screws. Look around to ensure it is still watertight and secure before applying the new layer or coating. If you have mildew or other similar growth, you can use diluted bleach to remove it carefully.After this, you need to apply the metal primer with a brush over the entire surface. Again, you will need to follow the specific instructions for the primer and coating to ensure proper application.

    Recommended Reading: How To Extend A Metal Roof Overhang

    What Is The Best Roof Coating For Mobile Homes

    There are lots of different modifications that you will have to make to your mobile home through the years if you want it to remain livable. And if you are new to owning a mobile home, you might find this list of things overwhelming.

    One of the things at the top of this list is the coating on your roof. When you first buy your mobile home, the roof will already be coated.

    But, over the years, this will need to be redone, otherwise you might find water leaking into your mobile home. In this guide, well be taking a look at everything to do with roof coating for mobile homes.

    Including how often it needs to be redone and what type of roof coating is the best. So to find out more, keep on reading.

    What Is Mobile Home Roof Coating

    Mobile Home roof coating

    There are a number of different issues associated with mobile home roofs. That means they need their own type of roof coating to deal with them. While some of these coating materials might be the same as or similar to those on traditional roofs, there are a number of key differences between mobile home roofs and standard homes.

    Firstly, mobile home roofs tend to have a lower pitch, if any at all. These flatter roofs are therefore not as good in extreme weather conditions, or even heavy rain. This is a problem associated with flat industrial roofs as well.

    When a roof is flat, there isnt anywhere for the water to run off and this can create water pooling issues and lead to dampness or leaks. Thats why most standard homes have pitched roofs.

    Mobile homes tend not to be made of the same material as well. You dont tend to get slate or shingle roofs on mobile homes. Many of them tend to be single fiber-glass constructions rather than a system of joists with layers of different roofing materials or constructions on top.

    Because of these issues, mobile homes can be much more likely to leak as they age. Replacing a mobile home roof can be difficult, especially on some types of constructions. One of the main causes of a leaking older mobile home roof is degraded roof coating, along with other things like low-quality ceiling material.

    If there are puddles of water, remove these as often as possible. Consider extra paneling or guttering to help water run off the sides.

    You May Like: House Trusses Cost

    What Our Customers Are Saying

    Saganaw Property Management

    We have been using your products now for 9 years for many of our built up roofs and a few Mods. You guys know that we appreciate the lengths you go to for us. All of us here know the product works otherwise we would not still be buying from you. It is easy to install and have not needed to go back to a project so far for any major issues. There is another reason we continue to do business with you guys, Lou and Kellie in particular and that is due to your appreciation of the roofing business. You guys go the extra distance when we are under deadlines or bidding projects and you guys get it. I cant say that about any other coatings company. Just keep it up!

    G SorrellLufkin,TXDiboll Lumber Operations

    Everyone was SUPER helpful and knew the product, properties and application methods well. I applied to product on the trailer in about a 2-hour period one evening. It was tricky with the application, from a novice who had not done this before, on the flat surface as well as rounding the corners and down on the sides about 6 inches. It went GREAT! Needless to say, I am super proud of the product and the finished job.

    More Tips To Maintain A Flat Roof On A Mobile Home

    • Always keep an eye out for the obvious signs of damage, like water stains in ceilings and walls, or worse, dripping water.
    • Be aware of the age of your roof and think prevention rather than remediation when roof shingles or other materials near the end of their viable lifespan .
    • Be aware of ice back-up under roofing materials or ice dams, etc. This can be both a cause of damage and a sign that something in the roof system is not performing adequately. Mobile home roof health and safety also rely heavily on good roof maintenance.
    • Any damaged portions of roofing should be repaired right away. This will prevent the spread of damage and secondary property damage or loss.
    • Hire the right person for the job if you do hire out inspections and repairs. For example, hire a company that is insured and bonded and has many years of experience maintaining and repairing flat roofs. Get references and actually call them.

    Also Check: Skylight Installation Metal Roof

    RELATED ARTICLES

    Most Popular