Tuesday, April 9, 2024
HomePopularHow Much Is Tile Roof Per Square Foot

How Much Is Tile Roof Per Square Foot

How Often Do Tile Roofs Need To Be Replaced

How to figure out how much square feet I need for tile

Tile roofs do not have a set replacement schedule. They can be exchanged if necessary. A well-maintained shingle roof should last 50 years or your entire home. Usually, the sub-soil, flashing, and battens develop problems before the shingles have problems.


THIS IS ADVERTISING AND NOT EDITORIAL. Please note that we receive compensation for each product that you purchase or register through this ad, and that compensation affects the ranking and placement of the listings featured in this document. We do not present information about all available offers. The information and savings figures shown above are for demonstration purposes only and your results may vary.

Compare offers from local top roofers

Free estimates without compromise

About Our Roof Weight Chart

The following table provides typical values for the weight of roofing materials and related building products. These values can be considered the dead load values or self-weight of roofing materials.

Where possible, the values for the weight of roofing materials were taken directly from manufacturer technical data sheets and are the actual weights of specific, representative products.

In a few cases, the weight of roofing materials we provide was calculated using more general manufacturer data, or taken from a non-manufacturer source that we consider reasonably authoritative.

In all cases, these values are meant to provide a general idea of what the various roofing materials weigh, and should not be used if precise values are needed for critical engineering calculations.

When precision is necessary, always refer to the data sheets of the actual, specific product you intend to use, or contact the technical department of the product manufacturer or material provider.

Cost Of Concrete Roofing Tiles

Concrete roof tiles are the least expensive type of roof tiles, while still being attractive and long lasting. In general, concrete roof tiles cost between $45 and $65 per square metre.

A house that’s 100 metres square will have a roof of approximately 112 square metres, so the roof tiling cost will be between $5040 and $7280. A roof with a steeper pitch or complex shape will require more tiles.

Also Check: How To Install Metal Roofing Over Asphalt Shingles

Whats The Average Cost Of Metal Roofing Per Square Foot

While metal roofing is primarily measured by the square, which is one hundred square feet, we are routinely asked for metal roof prices by the square foot. Hereâs what you need to know.

When shopping for a metal roof and establishing a budget, there are primarily three elements to include in your calculations â the metal material and profile accessories and underlayment and installation costs.

  • Material & Profile

There are literally hundreds of types of metal roofs you could purchase. From the thinnest steel in simple panels to the heavyweight âexoticâ metals like copper, zinc, stainless steel and others in shingles, diamonds, tiles and additional patterns, the prices range from cheap to very expensive. In the cheap category are simple, thin, painted steels that range between about $1 and $2 a square foot. Upgrading from there are heavier, better metals and finishes with more sophisticated profiles. This âmiddle qualityâ category usually ranges between about $2 and $6 a square foot. At the high end of metal roofing are options like copper and zinc. These premium choices usually range between about $8 and $15 a square foot. There are exceptions and caveats to every one of these price categories, but for budgeting purposes youâll find these quite useful. Consult a knowledgeable metal roof source for help in narrowing down the many, many options.

  • Accessories and Underlayment

By: Author Ryan M.

Recommended Reading: How Much Does It Cost To Install Roof Rails

New Ravenna Studio Line


Welcome to our new Ravenna Studio Line! We are excited to offer this line of high-quality, handcrafted mosaic tile. The Ravenna Studio Line is inspired by the historic mosaics of Ravenna, Italy and features a variety of colors, textures, and patterns. Whether you are looking for a statement piece or something more subtle, the Ravenna Studio Line has something for everyone.The mosaic tiles in the Ravenna Studio Line are made from the highest quality materials and each one is handcrafted with care. The result is a beautiful product that will last for years to come. We are confident that you will be happy with your purchase from us and we look forward to helping you create the perfect space.

Don’t Miss: How Long Does The Average Roof Last

Composite Roof Tiles Cost

Costing only $4 to $16 per sq. ft., composite tiles are among the cheapest roofing materials you can pick for your home. Composite tile roofing installation is also easier compared to some other materials that are more difficult to use. They are one of the most versatile roofing materials that can be installed in any color or blend, giving homeowners the freedom to choose the appearance of their structure. The biggest downside of is that if its made of low-quality materials, it can soak, freeze, or warp. However, if they are blended with high-quality materials, they can last up to 50 years.

Benefits Of Building With Metal Roof Panels

No matter the cost of metal roofing, you can often get a return on your investment pretty quickly. Thats because this building material comes with many awesome benefits. It may potentially have a larger upfront cost than some other building materials.

However, metal roofing can pay for itself with the following benefits:

  • Great longevity, with the ability to last for decades
  • Sleek and modern design
  • Helps you save on energy costs: Metal roofs can cool homes during the summer months by reflecting heat when the sun is beaming the brightest.
  • Provides insulation during the colder winter months
  • Little to no maintenance is necessary you may only need to recoat after a few years or use a simple soap solution in a pressure washer
  • Materials are recyclable, making this an environmentally-friendly project
  • Can qualify you for a discount with your homeowners insurance company, as its a fire-resistant material

The durability and strength of your metal roof can be especially effective if the panels are coated with zinc . A thick coat may cost more initially but will last longer than a thinner coat and be more durable to last against inclement weather.

Donât Miss: How Do You Insulate A Flat Roof

You May Like: What Is A Dormer On A Roof

Concrete Tile Cost Estimator By Roof Size

The average cost of a concrete tile roof, including materials and installation, is $16 per square foot, and the typical cost of the tiles only is $3.50 to $9.00per square foot.

National Average Cost per Square Foot $16
Typical Price Range per Square Foot $9 $22

However, roofs are typically priced by the roofing square rather than the square foot. One roofing square covers about 100 square feet, and the average cost of a concrete tile roofing square is $350 to $1,000.

The table below shows the typical cost per roof size.

Roof Size
Arizona and Florida

Can You Install A Concrete Tile Roof Diy

How to Figure Cost Per Square Foot for Installing Tile

Roofing in general is not a DIY home improvement project. Instead, it is hard work that takes knowledge and expertise. Here are the reasons you should hire a professional roofer to install your concrete tile roof :

  • Safety: Roofing is dangerous, and an experienced professional complies with safety standards. You can injure yourself or your loved ones if you do not have the proper training.
  • Time: Your time is valuable, and a professional roofing crew will complete the job much quicker.
  • Warranties: Many roofing contractors guarantee their work. If you are unfamiliar with the installation process, you are liable to make a costly mistake. Furthermore, improper installation can void the tile manufacturers warranty.
  • Tile weight: Roofing tiles are very heavy and difficult to work with.
  • Tools: A roofing company already has the tools needed to complete the project. Purchasing the required tools adds a lot to the project cost.
  • Quality: For many Americans, their home is their most significant investment. Protect your investment by hiring a trained professional who guarantees the quality of their work.

When you factor in material costs, time, and possible injuries/damages, you could end up with a higher total cost attempting a DIY installation.

You May Like: How To Find A Roofer In My Area

Cement Or Concrete Vs Clay Roof Tiles: Impact On Colors

While clay is the historic and predominant material, concrete is the other primary material option. Clay tiles normally come in two types: glazed or unglazed.

Clay tiles tend to hold color much better than cement tiles, especially in the case of Terracotta clay.

Regardless of the material, color is mixed in with the material during the production. With cement, color will fade somewhere between 30 and 50 years. With clay, the color will hold steady for 50 to 70 years. And with Terracotta, it is indefinite, or for sure, 100+ years.

Adding in tile shape and texture, provides a rather limitless variety of options. But generally, architects go for more popular and established styles like Terra-cotta barrel vault tiles, although flat tiles are also common, especially in more wind-prone areas where their low-profile can be beneficial.

Multi-colored tiles on a roof are an option that goes somewhat against the historic norms. Accessories are part of the installation, such that tiles shaped and formed for ridges, hips and gable ends add even more opportunity for greater variety.

How Much Does It Cost To Install A Green Roof

A green roof is where either all useable space on a roof or a portion of the useable roof is covered in live vegetation. According to the Renewable Energy hub website, a green roof will typically cost between $25 and $41 per square foot. Green roof installation costs per square foot decrease as size increases.

Also Check: How To Get Your Roof Covered By Insurance

What Are Some Types Of Roofs That Will Increase Your Costs

While there are many different styles and materials available to homeowners, certain roofs can be more expensive because they require additional accessories in order to install them properly!

These include things like dormers for multiple-story houses or skylights if you have a flat or low pitched roof.

In addition to those, materials such as slate or clay tiles will cost more because they are heavy and need to be cut in a certain way!

This can add an extra $20-$30 per square foot onto your price quote depending on the size of the additional materials that you have installed.

Metal Roof Tiles Prices

Asbestos Cement Kavelu Roofing Tiles at Rs 30/square feet in Indore ...

Metal roofing can be made of various types of metal, including aluminum, steel, zinc, copper, stainless steel, and titanium, depending on the homeowners preference. Each of these comes at a different cost in a range of $5 to $10 per sq. ft. Although they are more difficult to install and repair, they are extremely easy to maintain and are one of the most durable roofing materials that can last up to 100 years.

Don’t Miss: Can You Finance A Metal Roof

Roofing Manufacturers Know The Exact Weight Of Roofing Materials

Manufacturer technical data sheets are almost always made available on the manufacturers website.

If you cant find the information youre looking for on their website, most reputable manufacturers provide a phone number so you can contact their technical department. The technical department can usually answer any question you might have, and they always seem happy to talk to someone!

For links to a huge directory of roofing manufacturers, organized by roofing material and product type, see Roof Onlines Roofing Manufacturers Directory.

You can also look at roofing materials on the Home Depot website. Both the weight of roofing materials and the square footage they cover are typically given in the product description, which allows you to figure out the weight per square foot of actual roofing products.

Tile Roof Costs By Style

While roof tile material is the biggest factor when it comes to their cost, its worth knowing about the different styles of tiles. Simple designs, like a flat shake, cost less, while a traditional barrel tile runs the most. Because they sometimes require different techniques for installation, it can impact the price.

$9 $11

Read Also: How Much Hail Damage To Replace Roof

Concrete Tile Roof Cost In 202: Boral & Eagle Roofing Tiles

Concrete tiles are a viable alternative to clay tiles classic, contemporary, and even rustic styles are combined with durability and resistance to the elements.

For many homeowners, the bottom line is cost, and while many sources seem to pull their concrete tile pricing numbers right out of thin air, this guide provides real figures based on extensive research.

When Should You Budget Roofing Cost Per Square Foot

How to Figure Cost Per Square Foot for Installing Tile

When you begin to look for contractors, it is important that you plan how much money you can spend. Make sure to include the price of materials as well as labor in your total estimate!

This will allow the contractor and yourself a better idea of if they are within your range or not. If their costs are too high, then maybe they will be willing to negotiate their price with you.

Read Also: Which Is Cheaper Metal Or Shingle Roof

Clay Tile Roof Costs & Prices

Clay tile roof costs and prices range from $6 and $10 per square foot installed. Clay tile roofs are one of the oldest styles around, easily identifiable by their terra cotta color and distinct look. The style is based on Spanish architecture and are a good choice for warmer climates such as the Southwest United States.— Price Range: $6 and $10 per square foot installed —

Energy Efficiency Of Tiled Roofing

Investing in a tile roof can significantly reduce your monthly energy bills. Roofing tiles are the only materials currently in use that possess two inherent qualities necessary for energy reduction. According to the Tile Roofing Industry Alliance, clay and concrete roofing tiles offer natural thermal resistance, as well as a thermal barrier created by the airspace around each individual tile.

Installing a tiled roof can also make you eligible for federal and state tax credits and increase the resale value of your home, as more and more homebuyers are looking for homes with energy efficient features.

This can be especially helpful if you live in a hot climate or an area with a great deal of sun beating down .

Find Local Pros

Recommended Reading: How To Claim Roof Damage On Insurance

Tile Roof Maintenance Tips

Installing a tile roof is a big investment. To protect your investment, you need to be proactive and care for your roof. Not only will routine maintenance keep your roof in beautiful condition, but it can also save you money on future repairs. Here are some tasks you should always do to maintain your tile roof:

Related content: How much do roof repairs cost?

Cost Of Tile Roof Repair In Gilbert Arizona: How Much Should It Be


No one likes to see broken tiles on the roof of their home. It doesnt just ruin the homes aesthetic, but it can post issues to the household. After all, who would want to experience leaks during rains, or feeling less protected because of the damage up there?

Unfortunately, not everyone would take time to take care of it. Thats why there are professionals who provide repair services in case this happens. But how much is the cost of tile roof repair in Gilbert, Arizona?

Read on to find out!

You May Like: How To Remove Asbestos Roof

Are You Planning On Installing A New Roof If So What Is Your Square Footage

  • Metal Tile $20 and up depending on the material.
  • Some materials such as terra cotta tile can be very expensive, so make sure you ask about this beforehand!
  • Composition shingles are one of the most popular types of roofing materials today.
  • They are inexpensive, easy to install and very durable!
  • Depending on what material you choose for your new roof, it can cost anywhere from $12-30 per square foot in installation fees.
  • Flat Replacements/No Pitch $15-$20 per square foot
  • Solar Panels Inverter technology saves on energy costs and produces up to 50% more power!
  • Steel Roofing Tiles $25-$60 depending on the size and material
  • Saltillo Tile $50+ per square foot
  • Metal Roofing $45-$60 depending on the size and material of your roof.
  • If you are looking for a metal roof that will last, then choose zinc or copper!
  • These two metals actually age to create an attractive patina look rather than rusting away like other types of roofs do over time.
  • Since metal roofs are very durable, they can last for decades!
  • Wood Shingles $15-$25 per square foot depending on the type of wood.
  • Wood shingles are beautiful and require little maintenance to keep them looking great, but they do have a shorter lifespan than most other types of roofing materials.
  • Cedar shakes or cypress are two of the most popular types of wood shingles.


Most Popular