Roofing Insurance Claims For Storm Damage
When youve had a storm damage your roof and need help with your roof insurance claim in Atlanta, GA youll want to get that help from a roofing company with insurance experience. Colony Roofers has years of experience helping homeowners get the full benefit of their claims. To find out how we can help you with your insurance claim, give us a call at .
Install The Repair Patch
Apply a color-matched urethane sealant to the surface of the metal panel being repaired, staying just inside the marked pencil line. Apply the sealant liberally in the area, so that there are no gaps or voids at the leading edge of the patch.
Press the patch into place over the damaged area. The sealant should squeeze out from the edge of the patch along all sides. If there are areas where the sealant is not oozing, these are areas where moisture may later penetrate under the patch, causing a deterioration of the patch. Apply a little more sealant here to eliminate any gaps.
The Basics Of Metal Roof Repair For Clinton Township Mi Properties
Metal roofing is one of the most durable roofing materials for Clinton Township MI residential and commercial properties. However, they’re not invincible and infallible. They have their respective shortcomings such as corroding under prolonged moisture exposure and without protective coatings. When it comes to metal roofs, metal roof repair isn’t as easy as the one-time investment you’ll make in purchasing them.
However, it doesn’t mean you cannot do anything to save or prolong the lifespan of a leaking metal roof. In fact, you can perform the repairs on your own if you have the right set of equipment and knowledge in performing the repair procedure. Central Roofing Solutions has an excellent post on how to repair leaking metal roofs — learn more below.
Also Check: How Can I Tell If My Roof Is Leaking
Fix A Leaky Tin Roof In 4 Steps
- Written by Niki Hampton on Nov 03, 2009To ensure our content is always up-to-date with current information, best practices, and professional advice, articles are routinely reviewed by industry experts with years of hands-on experience.Reviewed by
A tin roof is very useful because of its durability, strength, and robustness. Usually, tin roofs are the preferred type of roofing for patios, or as an extension to the current roof. This type of roof is also popular for tool sheds and many other outdoor structures. However, as useful and long-lasting as they may be, even tin roofs are subject to wear and tear. A worn-out roof can cause a lot of problems, especially if it is raining. Here are some simple steps to help fix a leaky roof.
Step 1: Clean the Roof
The first thing you will have to do before you can start fixing your roof is clean it. This would mean cleaning any kind of debris, including dirt, leaves, twigs, moss, roof cement and other things from the top. This can be done by sweeping it all off with a long-handled broom. Once it is sufficiently cleaned, you can begin the actual process of fixing your leaky roof.
Step 2: Inspect the Roof for the Leak
Step 3: Cover the Leak
Step 4: Nail the Roof Flashing Down
With these simple steps, you can easily increase the longevity of your tin roof, no matter where it is or for what it is being used.
Why Is The Metal Roof Leaking At Ridge Such A Problem
As you can imagine, a roof leak at any location can have some serious implications for the structural integrity of your roof, and ultimately your home. However, a leak or water infiltration at the ridge, especially if you have a metal roof can be quite problematic. First, it can be difficult to discover exactly what is causing the leak. It could be improper sealing at the ridge itself, improper installation of the ridge vent, or perhaps the seam itself wasnt lined up correctly. Each of these cases is a possibility, and each one requires a different solution.
The second reason why leaks at the ridge of a metal roof can be such a hassle is that they can be unnoticed for quite some time, and therefore can lead to some serious mold or mildew issues even before you know what is happening. Since they are more likely to occur directly above your head, they can be difficult to notice until the water starts to drip on your head. By then, the damage may already be done.
Read Also: Which Type Of Roof Is Best For Solar Panels
How Much Does Insurance Go Up After New Roof
Insurance coverage for roofs will vary by insurer and even by region. Depending on the circumstances, your insurance premium might go up or it might not if you have a new roof installed. How much it might go up will vary by insurer. If youve filed several over the past few years, the premium is likely to go up more than it would if youve only filed one claim. In fact, filing one claim might not cause the premium to go up. For more information on choosing your new roof, take a look at Todays Homeowner.
How To Find Leaks On Mobile Home Roofing
If you do have one of the signs above, or already have buckets catching water, you will need to find and repair leaks on mobile home roofs.
Finding the leak is usually the most difficult part of any type of roof.
Since shingled roofs are most common on modern manufactured homes and flat roofs are most common on older mobile homes, well divide the two types of roofs for both finding and repairing leaks.
Related: Investigate That Drip! A Homeowners Guide to Finding Roof Leaks
You May Like: Do Metal Roofs Affect Cell Phones
Metal Roof Option #3 Replacement
A newer innovation for metal roof replacement is the metal retrofit system. This system is used when a low sloped metal roof system requires replacement. Typically this system is installed over a structural metal roof system where the existing roof system becomes the metal deck for the new roof system.
How To Fix A Leaking Flat Roof
Finding a leaking roof yourself from the inside of your property is possible, especially if it is a small leak.
Start by measuring the distance from the spot where you can see the leak to the nearest two walls, and then use those measurements to locate the leak on the outside of the rooftop itself.
Note that the majority of flat rooftops have a slight slope in order to allow for runoff, so you should start trying to locate the leak from the possible point of entrance on the roof, since the water will naturally run downhill.
Of course, you should also start by looking for rips, punctures, worn spots, loose or popping screws, separations in the seams, or other issues with your flat roof membrane.
If you dont find any obvious damage, youll want to check out the vent pipe boots, the caulk around the vents, flashing, and related structures for holes, damages, or other imperfections.
If you do all of this and still cant locate any leaks, call in a professional flat roof contractor as soon as possible to find the leak and repair them.
Having the materials and tools on how to repair a flat roof is also essential, youll need replacement materials and basic tools on hand at the very least so if that seems overly complex, call a professional to take care of your roof damage issues.
Recommended Reading: How Much To Build Roof Over Patio
Metal Roof Repair: Installing Metal Roofing Screws
Finally, placing the screw in the top of the rib provides a higher risk of the screw pulling out when there are high winds, and this strategic placement will result in a stiff and not loose diaphragm. More important however, this location of the metal roof offers solid wood just below the panel, making it easier to securely fasten the screws in place.
Lastly, you can prevent metal roof repair and additional expenses by maintaining your metal roof regularly. Careful inspection leads to efficient metal roofing maintenance. If you can identify and nip the problem in the bud, you won’t have much problem when it comes to improving the lifespan and durability of your metal roofing material.
To perform an efficient inspection, you’ll need a checklist to help you through the process and keep you safe. Safe At Home Inspections has a great guide that helps you get through an inspection effectively.
Get An Estimate And Make Comparisons With Other Local Roofing Companies As Well
You need to get an overall estimate from your roofing company as to the scope of the work that needs to be carried out.
You need to make a thorough inspection of that estimate to see how much your contractor will pay, what kind of work will be carried out, whats not included as part of the repair or replacement, the time frame of the project, and so much more! If you have any clarifications or concerns, nows the time to air them all with your contractor.
Once this is done, get an estimate from a couple of other companies so that you can make comparisons and then zero in on a contractor who best fits your specific requirements. Hiring a trustable and reputed local contractor will go a long way in solving your roofing problems.
Also Check: What Do You Do If Your Roof Is Leaking
How To Repair A Hole In A Metal Roof System
- Pin
- Total Time: 1 – 2 days
- Skill Level: Beginner
- Estimated Cost: $15 to $50
When a metal roof system is installed properly, its life expectancy is second to none. According to the National Association of Home Builders, asphalt shingles last, on average, about 20 years, composite shingles about 25 years, and wood shakes or shingles about 30 years. Aluminum or steel roofs, on the other hand, can easily last 50 years or more, and zinc roofs have been known to last well over 100 years.
But no building material, especially one that faces the constant weather battering of a roof, lives forever. Like all roofing systems, a metal roof requires regular maintenance and repair. Any roofing repair can be a hit-or-miss proposition. Done properly, repairs can last as long as the roof system itself. Done improperly, those same repairs can quickly break and fail, leaving the homeowner or building owner with a recurrent or constant leak. A recurring leak can be aggravating, but more serious is the interior damage and mold growth it can cause. It is always best to fix a roofing problem quickly and correctly.
Is Leaking Roof Covered On Homeowners Insurance
It will depend on several factors, with the main one being how your homeowners policy is stated. The other main factor will be what caused the leaking roof. If it is storm damage or damaged by unexpected happenings, then yes, your homeowners insurance is more likely to pay. If the leaking roof is because of the roofs age, the claim will likely be denied, citing homeowner neglect as cause of leaking roof.
So, when you have a leaking roof and you wonder, Who can fix my leaking roof?, other than your temporary patch, call a professional roofing contractor. Make sure they are certified, insured, and licensed. If the leaking roof isnt pouring into your home, get several quotes and compare them, asking for recent references. Call today for your roof leak repair needs in Atlanta, GA.
Also Check: Can Hail Damage On Car Roof Be Repaired
Rust On The Surface Of The Roof
Metal roofs have a lot of pros, but one con is that you have to check for rust. Rust on the surface of a metal roof doesnt automatically mean there is a leak. However, rust can destroy the roofs protective coating, leaving holes or scaling which can lead to a leak in the metal roof. If you spot rust on your roof, be sure to inspect for leaks and consider using a rust inhibitor to prevent the rust from spreading.
Metal Roof Leaksthe Devil Is In The Details
Mistakes in the design and installation of a new metal roof are sources of major problems. Typically the areas where problems occur are not in the system selection. The majority of the problems that cause metal roof leaks are related to the details used to finish the metal roof system. These mistakes are not immediately evident after the installation. They may take time to develop.
Here are five of the most frequent problems encountered during a metal roof condition assessment.
Also Check: How Many Layers Can You Put On A Roof
How To Prevent Leaks Created By Metal Roofing Screws
As stated previously, it is essential that you double-check your work before walking away from the roof. Screwing in a screw with too much or too little torque can be a common cause, as can a screw that is placed at an improper angle.
When you double-check your work, you ensure that there are no screws that will slip by you and you should not have to deal with leaks. But should there be leaks in your metal roof, you have a pretty good idea that the metal roofing screws are the culprit. Take a look around, inspect those screws, and make adjustments where you need to.
Leaks in your metal roof dont have to be a catastrophe. Taking proper care and using common sense can save you a lot of headache and hassle and leave your roof standing up to the test of time and those pesky leaks.
Contact A Professional Roofer About Asphalt Shingle Roof Repair
If you find that your property may need asphalt shingle roof repair or would like to know what services should be done, contact your local roofer. Only a professional will be able to conduct a roof inspection to properly analyze roof conditions and problems. Youll then be matched with the right roofing service which will strengthen your roof and protect it from the elements. Speak with a well-established roofing company today for more information and guidance.
Get assistance with asphalt shingle roof repair in Atlanta, GA by calling with the experts at Colony Roofers today!
Also Check: How To Patch A Leaking Shingle Roof
How Do I Get My Insurance To Pay For A New Roof
When your roofs been damaged after a storm has passed through your area, if the damage is severe enough, you might have to get your roof replacement. This can be an expensive proposition because new roofs can cost as much as or more than a new car. When you file a roof insurance claim, youll want to make sure everything is in order so they will cover the full cost of a new roof. Make sure you follow these steps:
- Know exactly what your policy covers. Read over your policy so youll understand everything thats covered.
- Before you contact your insurance company, document all the damage. This means getting an estimate from a reputable roofer, but you also want to supplement your documentation as much as possible. For instance, after a hailstorm, if you can, take photos of the hailstones.
- Research roofers and hire a reputable company like Colony Roofers. Reputable companies will be licensed and insured and will consistently get good reviews from past customers and from trade organizations or groups like the Better Business Bureau.
- Make sure you follow all your insurers procedures to file a claim and the procedures to take to file an appeal if the claim is denied.
Assess Damage On Home And Take Pictures
After everyone is safe and accounted for, walk around your home, and access the damage. Take notes and pictures before you call a contractor or your insurance company. As you inspect your home, check these things on the exterior and interior:
- The Roof. Check for holes and leaks in the roof, dented downspouts, gutters, and vents, leaning chimneys.
- The Siding. Check for damaged and missing siding. High winds and heavy rain can damage and loosen and tear off siding.
- Doors and Windows. The wind will blow debris around and through windows and doors, taking doors off their hinges.
- Your Appliances. There can be electrical and water damage, including the HVAC exterior portion and window units..
- Flooded Basement. Check the basement or crawlspace for flooding.
- Fire and Moisture. Electrical and water damage can result from storm damage.
Be sure to take notes and pictures of all the damage you find, including personal content and any detached structures that are covered on your homeowners policy.
Read Also: What Is The Purpose Of Roof Gutters
Flat Roof Leaking Causes
There are a number of reasons why your roof may spring a leak or other roof damage may occur.
Natural disasters like hail storms, tornadoes, hurricanes, electrical storms, floods, wind damage storms, and related severe weather often damage commercial roofing.
If you experience one of these natural disasters, inspecting your roof and assessing any damage is something that you should prioritize during the aftermath, even if you do not notice any leaks right away.
Do Away With Loose Caulking
Now that you have screwed everything tight and have prepared each gap for better sealing, you can now apply urethane cement to seal the metal roofs leaks. Before doing so, make sure you have found all areas with damaged sealants and membranes and applied metal-roofing base coat and glass-membrane fabric roof patch beforehand. Another thing to note is to use the proper urethane cement suitable for your roof.
Once you use urethane roof cement and apply the new patch, you have to do it correctly. Apply a coat of urethane cement over the entire area. An extension of at least six inches is good enough to secure the holes and gaps effectively.
Also Check: How To Measure A Roof For Shingles With Valleys
