Wednesday, September 28, 2022
HomeMetalHow Much Does A Metal Roof Cost

How Much Does A Metal Roof Cost

Galvanized Steel Roofing Prices

How Much Does a Metal Roof Cost? (Tear-off, Installation, and Product)

Galvanized sheet metal roofing prices range between $7.50 to $10 per square foot, installed. These types of roofs last around 50 years and are low maintenance. Two common types of galvanized steel are used in roofing, including G-60, which is used for roofing on sheds and workshops, and G-90, more commonly used in residential. These roofing materials are constructed with a steel core and a zinc coating for rust resistance and preservation. Galvanized roofing isnt as corrosion resistant compared to others and is a heavier type of material.

Rusted Metal Roofing Cost

Rusted metal roofing averages in price between $9 and $15 per square foot, installed. It is also commonly referred to and recognized by its brand name, Corten Steel. This type of roofing gives a rustic and weathered look. The rusting process protects the layer of steel underneath. Rusted metal roofing is available in most panel styles. It is not ideal for coastal residences.

Should You Invest In A Metal Roof

A metal roof can be a great choice due to its durability, appearance, and resale value. Using a metal roof cost calculator can help you determine what is the best choice regarding the cost of metal roofing versus shingles, the right style for your property, your budget, and your design preferences as well as a potential price on metal roofing that works for your bank account and style.

The metal roof vs shingles cost can be a complex decision, but your roofing company or roofing contractor can help you sort out the price of a metal roof as well as the different types of metal roofing and help you make the right choice for your property .

Also Check: How To Install A Swamp Cooler On The Roof

Are Metal Roofs Loud

If noise is your only remaining concern, we have great news. A properly-installed metal roof is no noisier than one made with asphalt shingles, ceramic barrel tiles, or any other material.

If you thought a metal roof would be louder than standard roofing material, you aren’t alone. Some of the misconception is due to the average American’s experience with metal roofs on barns, sheds, and other agricultural buildings. Or, perhaps you’ve been in an old building with a metal roof, one installed with outdated methods. In these instances, metal roofs are noisy when it rains. That’s because the sheets of metal were installed directly over the rafters or roofing surface.

Today’s metal roofs include a layer of sheathing between the metal and the roofing surface. Rain, hail, blowing debris – whatever strikes a metal roof sounds no louder than it would striking asphalt shingles.

Benefits Of Metal Roofing Compared To Asphalt Roofing

Metal Roof Installation Cost 2019
  • A metal roof can have triple the life expectancy of asphalt shingle roofs. While asphalt shingles have an average lifespan of 10-20 years, metal roofing can have a lifespan of 60 years or more. Metal roofs are also commonly referred to as the lifetime roof due to their long lifespan.
  • Along with its long life expectancy, metal roofs are less likely to need as many repairs compared to asphalt shingle roofs.
  • Metal roofs are much more durable than asphalt roofs. They are able to withstand harsh weather conditions and major storms while asphalt shingles are likely to need repairs or full roof replacements if damaged as a result of inclement weather events.
  • Metal roofing will never decompose. This means it is perfect for more weathered climates as it will not grow mold or algae.
  • Metal roofing material can also be recycled. This helps reduce the amount of garbage in landfills and lowers costs for disposal during replacements as metal can easily be sold and reused. Asphalt shingles can be recycled too if there is a nearby facility accepting them, but this is rare and they are much more likely to end up in landfills.
  • Metal roofing has great curb appeal and provides a different aesthetic than asphalt shingles. The metal roofing style is pleasing to many and can add to the value of your home.

Read Also: Which Way To Overlap Metal Roofing

How Is Metal Roofing Priced

Metal roofing and other types of roofing are based on cost per square.

Metal roof pricing for cost per square is calculated per square foot and then that is added up into the cost per square which is definitely something to pay attention to and understand when you are pricing out or looking for a new metal roof, or perhaps, more importantly, talking to metal roofing contractors or roofing companies about installing a new metal roof.

When you are deciding what type of metal roofing to purchase and install, keep in mind that while there are options at a variety of price points, the cost of metal roofing is a literal investment in the roof over your head as well as the roof over your family or employees and customers heads.

Factors That Impact Roofing Costs

When installing a roof, there are various other factors that play into the price. Some factors you should consider are:

  • Accessibility: If your roof is difficult to access, has power lines nearby or tree branches, the rate to install or replace it will increase.
  • Type of home: The taller your house is, the more expensive it will be because of the danger involved with the height.
  • Structural issues: If the framework is damaged, you’ll pay additional charges to have it repaired before installation proceeds.
  • Permits and licenses: The cost to obtain permits and the proper licenses could play into the total price of your installation.
  • Location: Labor rates vary greatly across the United States.
  • Re-Roofing vs. Replacement: In some cases, you can install new shingles over the old ones. This is known as re-roofing and is often less expensive. However, this method may be too heavy for the decking structure.
  • Warranties: Manufacturer’s warranties cover defects in the materials and contractor’s warranties cover installation problems. Read each of them carefully to learn what’s covered and what isn’t.
  • Gutters and Flashing: Replacing gutters and flashing will cost you more up front, but is often less expensive than having them installed as separate projects.

Recommended Reading: How To Install Solar Panels On Corrugated Metal Roofing

Selecting A Metal Roofing Contractor

To guarantee the longevity of your metal roof, the installation should be carried out by a professional with technical know-how and experience. To pick the best metal roofer, use the following criteria when looking at the professionals here on HomeGuide before you make your final selection. Create a list of contractors who have as many of these as possible:

  • Are A/A+ rated with the better business bureau
  • Are licensed, insured, and bonded in your state
  • Have been installing metal roofs for at least five years
  • Present you with documentation detailing roof specs, total costs of materials and labor, manufacturer-approved installation methods, and available warrantiesdetails of the base warranty package and upgrade optionsin their proposal.
  • Are highly rated on HomeGuide and Google

Get free estimates on HomeGuide from trusted metal roof installers:

Steel Shingles And Tiles

How Much Does Corrugated Metal Roofing Cost? Materials Installation Factors That Increase Price

There are several common types of steel roofing. Galvanized steel, which is coated with zinc to deter corrosion, is a popular choice for its strength and durability. A cheaper alternative is Galvalume, which is aluminum-coated steel. On the high end of the scale is stainless steel, which is a rare but striking choicethe Chrysler Building, for example, is roofed with stainless steel.

A 100-square-foot Galvalume panel costs between $75 and $250 and installs for a total of about $5.50 per square foot. Galvanized steel, which is a bit more expensive, runs about $3.35 to $4.25 per square foot, and materials plus installation come out to about $10 per square foot, or $17,000 to $25,000 total. Stainless steel is quite a bit more expensive at $10 to $16 per square foot for materials and as much as $15.50 more per square foot for installation.

Read Also: What’s The Average Cost Of A New Roof

Metal Roof Replacement Costs 101

Metal is a common roof material because its strong, sturdy, and long-lasting. Its environmentally friendly, able to be recycled countless times while remaining strong. Theyre attractive and let you express yourself by offering different styles and sheens.

Metal roofs are around two to three times the costs of those made with other materials. On the other hand, by paying a higher upfront cost for a metal roof, you save yourself a lot of time and money down the road. Before you begin to browse contractors, think about the size of the budget youre working with.

To get a ballpark figure of the total cost, it helps to know the:

  • Size of your roof
  • Forms
  • Price of labor
  • Lets look at each one. These must all be considered if you want an accurate quote for your metal roof replacement.

    Additional Factors In Metal Roofing Prices

    There are a few other factors to remember when pricing out a metal roof including panel gauges, finish quality and trim components.

    Gauges refers to the thickness of the steel itself, and can greatly affect the price of the metal panel. When looking at steel gauges, the lower the number is, the thicker the steel is. Standard gauges for steel products vary by region, but in general can be understood as the following:

    • 31 Gauge: Not recommended for building materials, used for DIY, hobby or craft projects.
    • 29 Gauge: Suitable for residential, agricultural and light industrial .
    • 26 Gauge: Minimum recommended for standing seam roofing panels.
    • 24 Gauge: Performance-rated roofing panels are often tested in 24 gauge.
    • 22 Gauge: Suitable for bare products like corten steel .

    In addition to gauges, choosing a paint system to match your needs will help determine your final pricing. There are primary types of metal paint systems:

  • SMP Long lifespans, with a slightly lower price than PVDF paint systems because of the lighter gauge material it is applied to. SMP is the correct finish for that type of panel because it bonds well with the harder steel and is better for the roll forming process of these panels.
  • PVDF Considered a high performance paint system, often found in 24 gauge products and used in demanding residential and commercial projects.
  • Ridge Cap Runs along the peak of your roof ridge and can be vented to assist in internal temperature controls.
  • Also Check: How To Figure Roofing Cost

    V Crimp Metal Roofing Price

    5V Crimp metal roofing panels are one of the oldest and most trusted types in the industry, ranging between $4 and $6 per square foot. Due to its traditional and aesthetic appearance, 5v Crimp is a popular roofing choice for a cost-conscious homeowner. This type of roofing has 5 V shaped ridges to each panel when viewed from the side. It resembles standing seam panels, with the key difference that 5V Crimp panels have exposed fasteners.

    Stone Coated Steel Roofing Price

    How Much Does A Metal Roof Cost on Average? Answer Inside

    Stone coated steel shingles range in price between $10 to $15 per square foot, installed. They are known to last around 40 to 70 years if installed properly. Stone coated steel roofing has high durability, is energy efficient, and requires low maintenance. While functionality is essential, appearance and beauty are also important factors. Stone coated steel roofing comes in various colors, textures, and designs to complement any style of home. Depending on how the roof is installed, there may be noise from rain or hail.

    Don’t Miss: How Much Do You Overlap Metal Roofing

    The Cost Of A Standing Seam Metal Roof Plus Pros & Cons 2021

    Standing seam is the premier choice in residential metal roofing. It is also the most expensive around two or three times the cost of corrugated metal panels and asphalt shingles, and about 10% to 20% more than metal shingles like interlocking steel and aluminum tiles and shakes.

    Standing seam offers unbeatable value that is hard for any other roofing material to match. Lets explore this in further detail:

    Metal Roof Installation Prices

    Professional metal roof installers charge about $350-400 per square for labor. Standing seam installation can start out as high as $500 per square, because its more difficult and time consuming to install this roofing system.

    Typically, roofers charge 2/3 of the total roof installation cost for labor and overhead. Cost of roofing materials is 1/3 of the total price. When estimating the total materials cost, roofers will include a waste factor of about 5-20% depending on the architectural design of your roof and the metal roof style you choose. For example, on a complex roof, there will be more waste if you want to install standing seam panels, than if you install metal shingles or tiles.

    Keep in mind that price quotes that you get online are for a basic install on a one storie ranch of cape style home. If your roof has a lot of penetrations , valleys, curves, your installation cost can significantly go up.

    Roof pitch is another factor that can increase your labor costs. Installing a metal roof over a low pitch is much easier and quicker compared to a high pitch roof architecture. If your roof is curved, expect to pay at least 50% more for labor compared to a standard roof install.

    Some roofing contractors can initially quote you a very low installation price, around $260-280 per square. However, they will then charge you extra money for every item of labor that they perform, such as:

    ridge hip ventilation

    Read Also: How To Build A Living Roof

    Maintenance And Repair Costs

    One of the most attractive features of a metal roof is that it requires practically zero maintenance. If you have a corrugated metal roof, you may need to re-tighten the screws about every 10 years. All other types of metal roofs are truly maintenance free. For most homeowners this is a breath of fresh air, as no one wants to spend their free time taking care of their roof.

    When it comes to repairs, its important to note that in most cases a metal roof will not require repairs, because its designed to be a water shedding system. This means that its impervious to damage from leaks and ice dams, and therefore should not need to be fixed.

    However, there are cases when faulty installation can compromise the integrity of a metal roof, and you will start to get problems like leaks, etc. Fixing a metal roof is expensive pros charge at least $500 to fix a metal roof. However, depending on the type of system and complexity of the problem, the total price can be a lot higher. For example, if you need to take apart standing seam panels, repairs can cost thousands, because its such a hard job.

    Ultimately, you should invest into high quality installation to avoid any costly problems and repairs down the line.

    Cost Of Metal Roof Materials

    How Much does a Metal Shingle Roof Cost? Cost Factors Included!

    There are many materials available for metal roofing ranging from $4 to $30 per sq.ft. The materials come in many different styles. You will find large sheets of metal roofing as well as metal roofing that is made to look like shingles. Different materials have different characteristics and different costs. The chart below lists the different types of metal roof materials and their respective costs, followed by subsections that explain each.

    Metal Roof Materials
    $15 – $30

    Read Also: Where Can I Buy Roofing Shingles

    Roof Replacement Or Repair

    Should you repair your roof or just replace it? if your roof is relatively new and the repairs required are simple, then by all means opt for a repair. However, if your roof is more than 2 decades old and requires major repairs that will cost you a substantial amount of money, a full replacement may be necessary. Consult a roofing expert for an evaluation so you can decide which course of action to take.

    Metal Roof Cost Per Square

    You will often find metal roofing tiles sold per square, ranging in cost between $400 and $3,000 per square. Each square is 100 square feet. The total cost of the project differs depending on the size of your roof and the type of material you choose. There are three common forms of materials to choose from: sheets, standing seams, and shingles. Sheets range between $400 and $650 per square, shingles range between $700 and $2,200 per square, and standing seams cost between $700 and $3,000 per square. The larger the roof, the more you can expect to pay.

    You May Like: What Is A Hip Roof

    Metal Roofing Cost By Gauge

    Metal roofing cost by gauge ranges anywhere between $1.75 to $9 per square foot. A gauge of metal roofing is a measurement of its thickness. The smaller the number, the thicker the shingle or panel of metal will be. For example, a 26 gauge is thicker than a 29 gauge. Thicker metal costs more than thinner ones. The chart below highlights the cost of metal roofing based on different gauges.

    Gauge
    $15 – $30

    Faq About Standing Seam Metal Roofs

    Evaluating Roof Costs: Are Metal Roofs a Cost

    1. What is standing seam metal roofing?

    Standing seam metal roofs use metal panels that connect to each other with unexposed fasteners, which makes them more durable and less prone to damage than other roof types. The metal used for standing seam roofing is typically thicker and more durable than other styles of metal roofs, such as metal shingles.

    2. Does standing seam metal roofing cost more than shingles?

    Yes, the materials and labor will cost a lot more for standing seam metal roofing than for traditional shingles. As a tradeoff for the extra upfront cost, youll spend less on maintenance, repairs, and replacements over the years.

    3. How long do standing seam metal roofs last?

    A standing seam metal roof usually lasts at least 50 years. Some last up to 100 years. The better you maintain your roof, the longer it will last.

    4. Can you install standing seam metal roofing yourself?

    No. You should never attempt to DIY any large roofing project because of the many safety hazards. You especially shouldnt try to install standing seam metal roofing because it takes expertise and specialty tools to do it right .

    Don’t Miss: How Much Should A Rubber Roof Cost

    RELATED ARTICLES

    Most Popular