How Much Does Spray Foam Roof Insulation Cost

A Reduction Of Indoor Air Contaminants

Due to its airtight nature, spray foam can greatly reduce the amount of pollen and dust that makes its way indoors. This not only provides you with cleaner air to breathe, but it will also help to keep your house cleaner. Another added benefit of this is reduced strain on your HVAC system, allowing you to save on maintenance and repair costs.

Spray Foam Roofing Recoating Cost

The cost to recoat spray foam roofing is $1.50 to $3.00 per square foot.

The topcoat on the spray foam roof prevents UV rays from damaging the SPF foam. It is critically important.

Once the topcoat thins to about 10 mils, it should be sprayed again to increase thickness to 20-30 mils. This point occurs between 10 and 20 years after installation.

*Recoating the foam can be done indefinitely, as long as the SPF is in good condition.

The primary cost factor is how much topcoat is applied.

If there are cracks in the foam, they must be cleaned and caulked before recoating the roof. This is an added expense above the recoating cost given above.

Best Price Spray Foam Insulation Kits

The cost to insulate a home varies depending on the size of the area to be insulated.

Here is a look at the spray foam kits available and their cost from Home Depot, Lowes, and Tiger Foam. When looking at the coverage available, it is good to note that 1-board-foot is equal to 1-square-foot of coverage at 1-inch. A minimum of 2- to 3-inches of spray foam is required to provide a proper air seal in most cases.

Recommended Reading: How To Measure A Roof

Choose The Right Spray

Open-cell spray foam costs less than closed-cell foam. Choose open-cell if it gives you the R-value you need, and if you want a sound barrier. Choose closed-cell if your project requires higher insulation and resistance to water vapor. Both types of foam can be used in either residential or commercial construction, though most residential construction uses open-cell.

Vegetable Oil Spray Foam Insulation

Spray foam insulation may be advertised as made from vegetable oil. However, most are still made from soybean oils. This oil has unique components that allow for the creation of a durable insulating product. Although the cost is comparable to other types of foam, soy- or vegetable-based foams might not be available everywhere.

Don’t Miss: Does My Roof Need Replacing

Where To Use Diy Spray Foam Insulation Kits

Spray foam insulation kits can be used in any area of the home that is open.

These areas include the attic, open wall cavities, crawl space, and rim joist. Also, around the windows, doors, and to patch existing insulation.

What you will want to keep in mind is the area’s size to be insulated, along with the proper thickness in inches of foam needed. The prices above are for one kit only, so insulating larger areas or multiple spaces could get costly.

Cost Of Spray Foam Insulation In Florida

Its no secret that insulating your home is a big project, but what is the actual cost of spray foam insulation? The short answer is that it depends on where you live, how big your home is, and how much insulation you need? Spray foam can range in price from $0.35 to $2 per board foot. Across the United States, the typical range is $1,083 to $3,280. However, Floridians dont need quite as much insulation as other parts of the country because of the warmer climate. Therefore, the typical cost of insulating a home in Florida ranges from $653 to $1,952.

Also Check: How Much Does It Cost To Shrink Wrap A Roof

Advantages Vs Disadvantages Of Spray Foam Insulation

Depending on your particular project, spray foam insulation may not be the best answer. Homeowners should carefully weigh the advantages and disadvantages of spray foam insulation to determine if it is right for their home.

How Much Money Is Saved By Insulating The Attic

You can definitely save money by insulating your attic with spray foam, but the amount can vary depending on what you have going on in your home.

Straight out of the gate, if your attic is the sole cause of your high energy bills then the addition of spray foam in the attic could save you anywhere between 15 to 50 percent. If you have other underlying issues with insulation in the rest of your home, then you won’t see the same kinds of savings.

Here are a few other things that can affect your monthly energy bill savings.

Do you have a high-efficiency furnace or AC unit? If you answered no, then your energy savings could be adversely affected because your dinosaur of an HVAC system is eating up all your energy usage.

What do you set your thermostat at? Do you change the settings when you’re not going to be home or when you go to sleep? Just these little adjustments can help reduce your energy bills.

If you have insulation in the other areas of your home, then that can lead to air leakage in other areas, which in turn will lead to high monthly energy bills. We discuss this more down below.

You May Like: How Much Does A Metal Roof Cost Per Sq Ft

Spray Foam Costs For New Vs Existing Homes

Installing foam insulation in a new home costs much less than doing the same in an older home. New homes are easier because installation companies can design the insulation for optimum soundproofing, heat transfer, and utility costs and can apply the spray foam while the walls, crawl spaces, and roof deck are easily accessible.

When working in older homes, pros need to work around existing insulation, drywall, and structures, which costs more in time and money. For example, if homeowners need to repair drywall in addition to adding spray foam insulation, theyll need to budget between $293 to $875 to cover the cost to repair drywall. Instead, perform weatherization or hire an energy auditor to help pinpoint exactly where you need to beef up your insulation.

Cost To Install Spray Foam Insulation: Closed Cell Vs Open Cell Foam

The national average cost to install spray foam insulation can range between $1.00 and $3.00 per square board foot of SPF insulation installed.

For example, to install 1,500 square board feet of one inch-thick Closed-Spray foam insulation in the attic space of a house, it will cost between $1.50 and $2.50 per square board foot, on average, with the total project cost ranging from $2,250 to $3,750, fully installed.

With the Open Cell Foam , your cost will likely range between $.5 and $1.50 per square board foot , depending on the size and type of application, accessibility, and your homes location.

Note: The average cost per square board foot will largely depend on the type of spray foam insulation being installed , project size , your homes location , ease of access, and other project-specific variables.

Did you know? Costs can vary greatly from company to company, project size, and your homes location.

Below, we provide a more detailed explanation and breakdown of costs based on the material type, and other variables.

Breakdown of Costs

For Closed Cell Foam, which has an R value of about 6 per inch, it will cost between $1.50 to $3.00 per square board foot installed. The cost would be higher for 2 inches of foam installed, and so forth to the required thickness.

For Open Cell Foam, which has an R value of 3.5 per inch, it will cost between $.50 and $1.50 per square board foot installed, on average, depending on the project specifics and your homes location.

Don’t Miss: How To Start A Roofing Company In Georgia

How Much Does It Cost To Remove Spray Foam Roof Insulation

The amount it costs to remove spray foam insulation will vary on factors like location, access and how much needs to be removed. But experts say its likely to cost more than installation. Thats because it gets into all the crevices and the gaps behind timbers making it difficult to get to and get rid of it. Also bear in mind that damage to your home may already have been done.

One of our readers who is buying a property with open cell spray foam has received quotes to remove the foam for £17,000 when the original installation cost £12,000. Although she is a cash buyer, she hopes to take advantage of equity release in the future.

According to Checkatrade, the cost of removing spray foam insulation can cost around £40 per square metre but you also need to factor in the cost of the skips as well as the safe disposal of the insulation.

Q: Can I Save Money By Choosing To Insulate My Property With Spray Foam

When it comes to prices and costs, every investment in your house or property will certainly cost you a specific amount of money. Regardless, not each of these investments presents you with a chance to save money. Saving yourself money that is spent on bills is actually possible with the use of spray foam insulation. These are some of the costs that should really be considered as future investments, especially for Toronto residents. Spray foam insulation costs depend on what type of spray foam is used and the amount that is applied. You can choose between insulating your whole house or just a part of it.

Spray foam insulation is considered the best alternative to fiberglass insulation during construction or construction plans. The type of foam used in this insulation method is flexible and expandable and is easy to spray on existing wall cavities during construction or on roofs.

Also Check: How To Figure Metal Roofing Materials

Cost Of Open Cell Spray Foam Insulation

Open Cell spray foams density is half an lb per cubic foot and an R-value of R3.5 to R3.6 per inch. The R-value, also known as the thermal resistance, is determined by the foam density of the spray such that the higher the foams density, the higher the R-value. R-values role in the insulation process is to show the resistance of the material to the heat flow. It is really important for this value to be high because this results in a greater resistance too. Open Cell foam spray has a lower density compared to that of its counterpart, the closed cell spray foam and it is not resistant to vapor. When used in attics and cool temperatures, it is advisable for the spray to be applied together with vapor retarder paint. The cost of the R6 foam varies between $2 to $7 per square foot.

Spray Foam Insulation Cost Vs Fiberglass

Overall, spray foam attic insulation cost is two to three times the cost of fiberglass insulation. Fiberglass insulation usually costs around $0.40 per square foot. On the other hand, spray foam can be progressively costly, but can offer more significant savings on cooling and heating costs. At the present time, the spray foam insulation cost per square foot, with a thickness of 3 inches, is around $3.

Because of the complexity of the installation procedure for spray foam insulation, the expense to install it is also higher than fiberglass.

Spray foam, in any case, lasts a lifetime and can be installed in crannies and nooks that are not suitable for fiberglass. In addition, with its lower energy bills and higher energy efficiency, the compensation time frame for offsetting the higher expense of spray foam insulation is somewhere in the range of 5 and 7 years for colder climates.

However, some of the primary ingredients in spray foam are isocyanates. In that case, these substance mixes are irritating to the eyes. When cured, spray foam is non-toxic and inert. In any case, during the curing procedure, the foam discharges a gas that can cause respiratory discomfort and obscured vision. In the event that the spray foam components did not mix in the correct extents, the foam could discharge this gas permanently, even after the curing time.

Sebring Design Build

You May Like: How Much Is A New Tin Roof

Which Is More Efficient Insulating The Floor Or Roof Deck Of The Attic

The question we get the most is whether the homeowner should insulate the floor or roof deck with spray foam?

We recommend the roof deck be insulated with spray foam because we prefer the unvented system. Its more efficient, and its safer we feel in the long-term.

The type of attic system you want is ultimately decided by what you want to do with the space. For people who feel like they need that extra storage or just dont want to take the risk of moisture buildup, the unvented system is the way to go.

A higher-pitched roof lends itself to a vented system and will still reduce the air leakage in the home.

Let’s dive in a little deeper into what both of these techniques have to offer.

The first step to the proper insulation of spray foam in an attic is to seal off the building envelope by insulating the top of the house.

The best insulation system for an attic is to spray open cell foam on the attic’s roof deck. There are several reasons why this is more efficient:

• It stops all air and moisture from coming in through the roof.
• It protects your roof.
• It will make your attic the same temperature as the rest of the house, so the furnace doesnt have to work as hard to maintain a constant temperature.
• Heating the attic for homes in Michigan with steeper roofs can help the airflow in your home. Think of a lava lamp and the way the wax rises to the top when it is warm and sinks back to the bottom as it cools down. Air moves the same way as it heats up and cools down.

Is Spray Foam Insulation Worth It

Source: TruTeam

We didnt list spray polyurethane foam as one of the best roof insulation options for no reason.

Spray polyurethane foam adheres well to surfaces, seals gaps, and, of course, provides an outstanding R-value per inch.

More importantly, spray foam insulation can reduce energy bills and earn homeowners tax credits.

There are notable caveats, however.

Project costs can soar for homes that warrant extra-thick insulation. Additionally, most homeowners need to hire a contractor specially trained to install SPF, which only adds to the bill.

If you cant afford a professional contractor or want to insulate your home yourself, spray foam is not for you.

However, if you need to maximize your homes energy efficiency, spray foam insulation will deliver energy savings handsomely.

Fixr.com provides cost guides, comparisons, and term cheat sheets for hundreds of remodeling, installation and repair projects.

Recommended Reading: How Much Power Does A Tesla Solar Roof Generate

How Much Is Spray Foam Insulation Going To Cost

Spray foam is a brilliant home improvement tool that is most commonly known for being a home insulator. This is particularly important for homes in temperate climates with variable weather conditions throughout the seasons. It is one of the most critical elements in constructing a home that can withstand these conditions over time and as such, you may be wondering how much spray foam insulation will cost you.

The cost of insulating your home with spray foam insulation depends on where in the home it will be applied, how much board footage it will need to cover, and whether you need open cell or closed cell spray foam. The average cost of spray foam insulation is $1.00-$6.00 per square foot.

Spray foam insulation is quickly overtaking conventional insulators like fiberglass and cellulose for home and office insulation due to its flexibility and efficacy at protecting against harsh temperatures however, there are a few factors to think about when deciding if it is the best option for your space.

The Pros And Cons Of Spray Foam Insulation

First introduced to the market in 1986, spray foam insulation quickly gained traction in many new construction projects due to its comfort and energy efficiency. Since then, its become one of the more popular options for all insulation jobs because of the benefits it offers and versatility.

If youre considering spray foam for your home or business, its important to know both the advantages and drawbacks. And youll probably want to know what it is! With that in mind, here are the pros and cons of spray foam insulation.

Don’t Miss: How Much Do Erie Metal Roofs Cost

Questions To Ask Spray Foam Installers

• Are you licensed, bonded, and insured?
• How long have you been in business?
• What experience do you have with spray foam insulation?
• Will the work be subcontracted?
• Is spray foam the best insulation for my space?
• Do you recommend open-cell or closed-cell insulation for my space, and why?
• How long does it take to cure, and when can we safely re-enter the house?
• Do you use a machine that automatically shuts off if the spray foam formula ratios are incorrect?
• Is removing damaged or old insulation included in the quote?
• Do you offer financing options?
• Do you offer a whole-house discount?
• Is there a warranty?
• Can I be in the house during the insulation process?
• How long will the project take?
• How long should the insulation last?
• Is there a warranty, and if so, what does it include?
• What is and is not included in the price?
• What additional costs should I expect?
• Are there rebates available, and do you apply for them?

Get free estimates on HomeGuide from trusted pros:

Health Effects And Risks

Some of the main ingredients in spray foam are isocyanates. These chemical compounds are highly irritating to the eyes, lungs, and stomach, and contact with the foam can cause severe skin rashes and inflammation. This means that protective clothing, including gloves, goggles and a mask or respirator, must be worn when applying spray foam. An overexposure to isocyanates has been shown to cause asthma attacks in workers who are exposed to spray foam again. Long-term respiratory irritation could eventually lead to chemical bronchitis. Once cured, spray foam is inert and non-toxic. However, during the curing process, the foam emits a gas that can cause respiratory distress and blurred vision. If the spray foam components are not mixed in the proper proportions, the foam could emit this gas permanently, even after it has been cured.

Fiberglass insulation contains glass wool fibers that are believed to be carcinogenic. Some fiberglass products warn of “possible cancer hazard by inhalation”. Fiberglass irritates the eyes, skin and respiratory system. Potential symptoms include irritation of eyes, skin, nose, throat dyspnea sore throat, hoarseness, and cough.

Protective gear is recommended when installing either type of insulation.

Read Also: What To Use To Cut Metal Roofing