Friday, February 9, 2024
HomeHow Much To Put Shingles On A Roof

How Much To Put Shingles On A Roof

Does Insurance Pay For A New Roof

How to Install Roof Shingles | Ask This Old House

There are a few factors that will decide whether or not insurance will pay for your replacement.

The biggest factor is if your roof was damaged due to severe weather.

If you have missing shingles or hail damage due to a recent storm, there’s a good chance your insurance company will cover your costs.

But if your entire roof wasn’t damaged, they are unlikely to cover replacement costs and just pay for repairs.

This is when it becomes important to contact the top roofing contractor in your area.

They’ll walk you through the process and communicate with the insurance company about what needs to be done.

You should always have a knowledgeable roofer on your side as you deal with your insurance company.

Insurance companies will always want to pay out as little as possible to cover the repairs or replacement, but your roofing contractor will ensure that your insurance company pays what’s necessary to complete the repairs.

You also need to have your roof inspected immediately after the storm.

If you wait too long, your insurance company may say that the damage was caused by other factors like neglect or age, and they won’t cover the cost of the replacement or repair.

If your damage isn’t due to a storm or a similar event, like a tree falling on it, it’s unlikely that insurance will cover it.

Roof Replacement Mansfield Ohio

First of all, how do you know when you need a new roof? Several situations arise when most people need to get a new roof. First, you have obvious storm damage. When severe storms strike, or even just really high winds, many of your shingles can get damaged by the relentless pounding by that harsh weather. Also, large hail can cause damage to enough areas on your roof to warrant a new roof. In a home insurance claim situation, contact a local roofing company to assist you in documenting the damage properly and proceed form there.

Secondly, roof damage from old age and long-term weathering. If a storm doesnt interrupt your roofs typical lifespan, it will be from weathering. The harsh sun and typical weather patterns are enough in the state of Ohio to prevent a roof from lasting their full life. Most roofs last between 20 and 25 years, depending on the type of roof you use. When you inspect your roof you are looking for damaged shingles, ripped shingles, and missing shingles. Also, look for the granules in your gutters, a solid sign that your roof is wearing out. If you arent certain about what you are looking for, contact a qualifiedroofers near me to do a free inspection for you to assess the lifespan of your roof.

Other Factors To Consider

Labor is normally one of the biggest expenses for homeowners who hire a contractor. Labor will cost anywhere around $4,500. Expect to pay about $4 more per square foot if workers must remove and dispose of any existing shingles before installation begins.

Materials, supplies, and tool maintenance also add around $1,325 to the overall price and keep in mind that contractors need more than just shingles. They will purchase items like:

  • soffit vents – $2 – $4 each
  • metal flashing – $5 per square foot
  • roofing cement – $22 per gallon
  • roofing felt – $18 per roll
  • roof sealant – $850 – $1,000

Shingle Type

The texture, quality, thickness, width and color of the shingles you ultimately choose will also have an effect on the overall cost to install your asphalt shingle roof. Thicker or wider units normally fetch higher prices.

Roof Slope

Another important consideration is the height and slope of the roof. Contractors charge extra if they need to use taller ladders and additional safety gear.


Should your roof have some rot or damage and your contractor is required to remove and dispose of any material before installation commences, budget for anywhere around $1 – $5 per sq ft on the cost to install the asphalt shingle roof.

Also Check: Which Way To Overlap Metal Roofing

How Much Does A Roof Replacement Cost

Is it time to replace your old roof?

Maybe you’ve noticed leaks, the last thunderstorm took a few shingles with it, or maybe it’s just old.

No matter what the reason, you are probably wondering what it’s going to cost you to get it replaced.

It might seem like a pretty straightforward process, but there are countless factors that can influence your costs.

Aside from the roofing material you choose to use, additional items and supplies like nails, ventilation, flashing, and labor will all add to the roof replacement cost.

In the article below, we will break down the average cost to replace a roof.

Cons Of Asphalt Roofing

Cedar Shake Roofing Chicago

Though your asphalt shingle roof should last 15-30 years, it is not necessarily a great environmental choice. Traditional roofing products contribute an estimated 20 billion pounds of waste to U.S. landfills on an annual basis. Asphalt shingles do offer the possibility of being reused or recycled with uses in hot mix asphalt, cold asphalt patching, and as a fuel in cement kilns, but asphalt naturally contains polycyclic aromatic hydrocarbons, some of which are carcinogenic and may put recycling workers at risk. If your existing roof has less than two layers of shingles on it, you can reduce the amount of waste generated by your upgrade by layering your new roof on top of the existing structure.

Get started

You May Like: How Long Are Metal Roof Panels

Roof Pitch For Shingles

The pitch is the slope of your roof–the rise compared to the run or horizontal measurement of 12. For example, a roof that has a rise of 6 would be referred to as 6-in-12 or just 6-pitch.

Roofs with a very high pitch are more difficult to install, which increases the installation cost. It is harder for the roofer to walk or remain safe on a roof with a . So, there is often staging and additional equipment involved, which increases the length of time for the set up prior to installation. While installation may cost anywhere from $1.50 to $5.00 a square foot for a roof with an average pitch, these costs may be double or more for roofs with a higher pitch.

Low to medium-pitched roofs are the preferred standard for easier walkability for repairs and maintenance. A flat roof is prone to standing water and leaks while a high-pitch roof creates issues with installation, repairs, and maintenance.

Another aspect of knowing the roof pitch is to know the right type of roofing material to use for your particular roof, as well as what roofing supplies will be needed. Some roofing materials are better suited to high pitch roofs.

A pitched roof is any roof slope greater than a 3-pitch. A-frame houses have a 12-pitch, but some roofs are even more pitched than that. Most pitched roofs in todays construction industry are built using asphalt shingles.

Roofing Over An Existing Roof: What You Need To Know

When you start noticing issues with your roof, orwhen it is nearing the end of its lifespan, it is probably time for some bigdecisions. You may wonder about the roofing options you have, and which onewill be the best solution for you. The best thing to do then is to call in aprofessional roofer and discuss it with them, as they have both the neededexpertise and experience to steer you in the right direction.

If the condition of your roof is such that a fewrepairs will not suffice to get it back into shape, but it is still functionalenough that it doesnt need to be completely torn off and replaced, then youshould think about reroofing, i.e. installing a new roof over your existingone. Reroofing is not the same as roof replacement and there are certainconditions that your roof needs to satisfy in order to be a viable candidatefor reroofing.

Keep reading to find out all you need to know aboutreroofing, including how it differs from a roof replacement and what its mainadvantages are.

Read Also: How To Keep A Metal Roof Straight

Factors That Will Determine The Price Of Replacing A Roof

  • Size of the roof: The material & labour cost to install a new roof on a small roof vs. a larger roof will differ.
  • Roof slope or pitch: Roofs that are steeper requires more time to install and also more material.
  • Type of application: Low slope vs steep slope systems require different roofing applications.
  • Material choice: Prices vary depending on the roofing material and its quality.
  • Number of layers: If your current roof has multiple layers of roof shingles, this will require additional time to account for the removal of the existing layers.
  • Roof Adornments : These may require extra work if leaks and/or flashing repairs/replacements needs to be addressed.
  • Roof accessibility: Roofs that are difficult to access will require additional equipment and labor.
  • Roofing system components:Components of a good roof system includes the underlayment and decking materials, ventilation and insulation installed and types of fasteners used.
  • Waterproof The Vent Pipes

    Asphalt Roof Shingles Installation
    • 10.1 – Install shingles right up to the vent pipe.
    • 10.2 – Trim shingles so that they fit around the pipe, then nail.
    • 10.3 – Insert pre-formed flashing around the vent, then glue with plastic roof cement. The boot should extend 4″ over the lower shingles, rise 8″ on the vent, and extend 6″ on both sides.
    • 10.4 – Colmater l’espace entre le tuyau et le solin avec du ciment plastique.
    • 10.5 – Continue installing shingles, taking care to completely cover the upper edge of the flashing.
    • 10.6 – Glue all parts of shingles overlapping the flashing with plastic cement.
    • 10.7 – Coat exposed nails with plastic roof cement

    Don’t Miss: Can Hail Damage On Car Roof Be Repaired

    Labor Cost To Install Metal Roof

    Labor costs to install a metal roof ranges from $3.50 to $12 per square foot, with most homeowners paying about $5 per square foot to install metal roofing. Labor comes out to between $3,000 to install an ordinary roof, and closer to $8,000 for more substantial, thicker, high-end materials. The cost of labor is around 3 to 5 times the rate of the materials alone.

    Asphalt Roofing Cost Factors

    There are several cost factors to keep in mind when installing asphalt roofing:

    • Removal/Disposal of Old Roof: $3-$5 per square foot. Costs can increase depending on location and the difficulty of the removal process.
    • Roof Rafters or Trusses: $1,000-$10,000. Roof rafters or trusses need to support the roof damaged trusses will need replacing.
    • Shingle Styles. Asphalt shingles can mimic the look of different materials, such as slate, wood shakes or tile, and they come in a wide variety of colors.
    • Algae and Fungus: extra 10%-15% of materials budget. You might want to consider algae-resistant shingles if you live in a location with high humidity or precipitation.
    • Weight. Thicker shingles last longer, meaning theyll cost you more up front.
    • Steep Pitch. A house with a steep pitch increases the physical risk for anyone installing asphalt shingles on the roof .

    Read Also: How Do I Know If My Roof Is Leaking

    Metal Roofing Prices Per Sheet

    Metal roof panels are a very popular roofing choice, especially if you are looking for a budget friendly material. Economical corrugated metal sheet panels cost $3 6.5 per square foot installed, or $300-650 per square of roofing.

    Metal sheet panels are available in a number of different styles, including: R-panel, 5V-crimp, corrugated and through-fastened panels.

    They are made of either galvanized or galvalume steel and vary in thickness from 24-30 gauge steel. These panels can be painted or left as bare metal.

    Cheap metal panels are good option for a barn, a storage space or a cabin style home.

    Home Depot has a very large selection of various types of metal panels, sold in sheets. Steel metal sheets are available in various lengths from 5, 8, 10, 12, 16 ft. Sheet prices range from $18 to 52 per metal sheet. The most popular are 12 ft Classic Rib Steel panels that cost $39.84 each.

    How Do You Install Asphalt Shingles

    Cedar Shake Roofing Contractor Chicago

    A professional roofer will examine the pitch and overall roof before getting started. Theyll check to see that the roof deck is in good shape and that the roof is secured to the roof trusses. Once you select your materials, the roofer will lay down the drip edge to protect from water damage.

    Next, a roofer attaches an ice and water protector over the drip edge, followed by an underlayment for added protection. The roofer will complete valley flashing to prevent leaks before beginning to nail in the shingles.

    Don’t Miss: How To Weld Tpo Roofing

    Builder Mike Guertin Shows Three Conventional Ways And One Newer Method For Weatherproofing This Crucial Roof Detail

    Synopsis: This article illustrates four different methods of shingling a valley, comparing the advantages and disadvantages of woven, open metal, closed cut, and Long Island valleys and describing the authors techniques for preparing and installing each one.

    A lot of todays new home designs include multiple gables and roof configurations. When two roof planes meet at an inside corner, a valley is created. Because valleys collect and channel a greater volume of water than a single roof plane, I always make an extra effort to design and build them as watertight as possible.

    For this article, I mocked up a section of roof to show four ways to shingle valleys. The mock-up allows me to show all four methods in a similar context. I used three-tab shingles for two of the methods and laminated shingles for the other two. When shingling a roof with three tab shingles, its easiest to shingle the roof planes first, working toward the valley. Laminated shingles let you start in the valley and work outward, which can be an advantage in some situations.

    Cool Roof Shingles Cost

    A cool roof is an energy-efficient roof that stays cool even in the hottest weather. Three key features characterize these asphalt shingles: thermal emittance , and solar reflectance index or SRI . The higher the SRI rating, the cooler the home will stay. Normally, cool roof shingles will be lighter colors. The cool roof shingles cost about $2.50 per square ft.

    Don’t Miss: What’s The Average Cost Of A New Roof

    Related Costs And Installation Time

    Only consider the costs that apply to your new roofing project:

    • $25-$250 | Total delivery charges for materials, when applicable
    • $100-$750 | Cost to raise shingle bundles to the roof, when applicable
    • $90-$165 per square | Removal and disposal of one or two layers of shingles and roofing paper
    • $115-$235 per square | Installing new asphalt shingles and required accessories

    Compare Shingle Prices Based On Brand

    How to Shingle an Outdoor Storage Shed Roof

    When researching various asphalt shingle products for your roof, you have surely noticed that some manufacturers and brands are more expensive than others.

    However, usually for the same class products, prices are pretty competitive across manufacturers. The biggest difference between them is mostly in the brand name recognition, roofers and homeowners perception of material quality, and installers preference.

    Here is a quick reference chart comparing shingle costs across the top brands: GAF, Certainteed, Owens Corning, IKO, Tamko and Malarkey.

    $1.58 1.70

    Also Check: Who Can Install Tesla Solar Roof

    How To Shingle A Roof

    A step-by-step guide showing you how to secure shingles to a roof from start to finish.

    In this video, we walk you through how to shingle a roof so it is straight and water tight. the These project guidelines are for low roofs that allow easy access, such as those on porches, sheds, or doghouses. For larger roofs, hiring a professional roofing crew with proper fall protection is advised.

    Garage Roof Replacement Cost

    Garage roof replacement costs $1,000 to $2,500 on average, depending on the size, pitch, and materials. Installing a new roof on a 280 square foot 1-car garage costs $1,000 to $2,000, and a 400 square foot 2-car garage runs $1,500 to $3,200, depending if it’s asphalt or metal.

    Garage Roof Replacement Cost

    The garage sizes used for the table above are:

    • 1 car – 12 by 12
    • 2 car 20 by 20
    • 3 car 36 by 24

    The prices you see locally will be more or less depending on where you live, time of year, and the pitch of the roof. These prices would be the same if you were looking for the cost of a new roof for a detached house or workshop of a similar size.

    Also Check: Do It Yourself Metal Roofing Kits

    Bay Window Roof Replacement Cost

    To replace a bay window roof with architectural asphalt, you can expect to spend $398 for a 12 square foot perch.A typical bay window is 7 feet wide, and your bay window roof will extend 24 from your wall. Add another 6 inches for the roof to extend over the front of the window. The chart below shows the price for architectural asphalt shingles, clay tile, and copper roofing.

    Bay Window Roof Replacement Cost

    • Pay for permits

    Importance Of Quality Underlayment

    install metal roofing price

    I mention DeckArmor above, because in my opinion it is the best synthetic underlayment available on the market, based on quality and price.

    Compared to FELT underlayment, price per square foot of deck armor is $0.202 vs $0.079 for felt or about 4 times more expensive. In reality its even less, because you have 60% more overlaps with felt, thus the actual coverage is much less.

    However, since most roofs are about 1600 sq.ft., 2 rolls should be enough for a typical house. In the grand scheme of things, Deck Armor will cost only$249 more. However, it is hands down a much better WATERPROOFING product, so it is very much worth it!

    Recommended Reading: How To Clean Algae From Roof

    Calculating How Many Shingles Do I Need

    How to Measure Your Roof:

    • Use a tape measurer to find the length and width of each section of your roof.
    • Multiply each section of your Roofs Length x Roofs Width = Roofs Surface Area
    • Repeat for each section of your roof.
    • Add all of the Roof Surface Area sections together = Roofs Surface Space
    • Divide Roofs Surface Space/100 = Square feet also known as Squares
    • For example: a 10 Square Roof is actually 1000 sq. ft overall.
    • Use this number to buy the correct amount of asphalt roofing shingles and underlayment to cover your total roof area + 10%.

    * Full Description below:

    The simplest way to get the area of your roof will likely require you climbing up with your tape measure and getting help from a friend or family member. This may be a job best left to the pros if you have any safety concerns about being on a roof. Measure the length and the width of each section of your roof and multiply the two dimensions together. This gives you the roofs surface area of that individual section of roofing. Add all the roofs areas together to find out exactly how much roof surface space there is overall. Do this in feet and then divide the total that you come up with by 100 to get your figure from square feet to what is known as squares. A 10 square roof is actually 1,000 square feet overall.


    Most Popular