Replace Each Damaged Shingle
The trick here is to avoid damaging the shingles around the spot where the damaged shingle was. Use your pry bar to lift the bottom row of nails in the shingle above and pull out the nails. Lay each new shingle and press down hard across the surface. Reinsert each nail through the readymade holes in the shingle above and use the hammer to push each nail into place.
Get Free Price Quotes
Shed Roof Costs
The following prices are based on a typical 12 foot x 8 foot roof. Actual shed roof costs vary widely according to the type of materials selected and local labor costs the following figures should be used only as a general pricing guideline.
Roof Framing Costs
- Hip, gable, and gambrel roofs are priced similarly expect to pay $6 to $10 per square foot for both labor and materials.
- A mansard roof costs $8 to $12 per square foot installed.
- Lean-to roofs cost as little as $4 per square foot installed.
Roof Coverings Cost
- Covering a shed roof with asphalt shingles costs $3 to $5 per square foot including labor and materials, while a more expensive option such as slate tile can cost as much as $20 per square foot installed.
Need A Rooferget 4 Free Quotes From Local Pros:
Enter Your Zip Code:
Note: For homeowners who live in large and expensive coastal cities like Seattle, Portland, Los Angeles, San Francisco, San Diego, New York City, Boston, Miami, and Washington DC, the average quoted residential roofing prices can range from $6.00 to $8.50 per square foot or $600 to $850 per square of asphalt shingles installed or replaced, depending on the scope of the project.
The higher roofing costs in coastal areas are due to the higher local cost of living, and hence higher cost of doing business.
Booming local real estate values also drive up the demand and prices for professional home remodeling services, which have experienced a 15% to 20% price inflation since the start of the pandemic. This has been especially true in the high cost of living areas where demand for exterior home remodeling services has been especially strong.
Did you know? The average residential roof size in the US is about 1,700 square feet or 17 squares, although there are many larger homes with roofs that can be well over 2,000 sq. ft. or 20 squares. In fact, larger residential properties with garages can easily exceed 3,000 sq. ft. or 30 squares in size.
All professional roofers use squares to measure and estimate roofs. A square is equal to 100 square feet of the 3-dimensional roof surface.
What About Prices for Other, Less-Common Roofing Systems?
See costs in your areaEnter Your Zip Code
You May Like: How To Seal Rubber Roof Seams
Warning Signs You Need To Hire A Roofer
Knowing when to hire a roofer is imperative to ensuring your entire home is protected. Your roof acts as the initial barrier against the elements, which is why its key to hire a roofer before damages worsen.
Here are a few signs it might be time to replace your roof — or at least perform heavy repairs:
If you see any of these signs, you shouldhire a roofer right away to prevent further damage to your homes structure.
Diy Roof Replacement Vs Hiring A Roofer
For homeowners looking at replacing their roof instead of hiring a professional, an asphalt roof will cost $3,000 less to $6,000 less . However, while small roof repairs are cheap and relatively easy to carry out by the homeowner, as long as safety precautions are taken, roofing a home is better done by professional roofers. The downsides of completing the work as a DIY project are:
- In removing the original roof, you may cause issues that will lead to leaks.
- Once the old roof is off, you could miss structural issues or things that will contribute to more leaks.
- You might not create a perfect weather seal to protect your home from the rain when installing the new roof.
- You could introduce issues that translate to increased utility costs from heating or cooling.
- You could fall from your roof.
- You could negatively impact the resale value of your home.
Your roof is the single biggest surface barrier between you and the elements. Given the importance of the roof, and the potential for significant problems, we suggest looking for bids from the roofing professionals we have on HomeGuide before making a final decision to do the work yourself.
Get free estimates on HomeGuide from trusted roofing companies:
You May Like: Can You Put A Skylight In A Metal Roof
Strip Off The Old Or Damaged Felt
To make repairs easier , you need to make sure you get rid of the existing in the problem area…
How to remove felt nails
If the roofing felt is held in place with felt nails, use your flat-head screwdriver to remove each nail. Again, this should be easy to do. If youre only replacing a section of the felt, take care not to rip the felt that is staying on the roof.
Can you put new felt over old felt on a shed?
We wouldnt recommend refelting over old felt on a shed roof. By doing so, you could miss underlying issues with the structure – such as damp or rotten roof boards.
How Much Does A New Roof Cost Uk 2021
The two biggest determinators are the materials used in the build and the size of the roof in question. While jobs will certainly differ depending on these aspects, the average value of a new roof installation in the UK is around £5000, and the vast majority of people will spend anywhere between £3000 to £7000.22 . 2021 .
Recommended Reading: Do You Need A Permit For A Roof
Types Of Shed Roof Repairs
When you get down to it, there are hundreds of different types of repair you could do to a shed roof. But they fall into 3 basic categories: outer layers such as shingles and underlayment, sheathing or plywood, and roof rafters.
Hopefully, you dont have rafter issues because that means the structural integrity of your shed is compromised dont go in it, particularly if there is a load of snow on top! Lets have a quick look at each repair type.
Take Down Existing Shingles
Remove the existing shingles, felt and nails from the roof with a pry bar. Start at the top of the roof, inserting the pry bar under the shingles and pushing downward. The downward motion forces the opposite end of the pry bar upward, easily removing the shingles and nails in one fell swoop. Start at one side and work your way across the roof, one row at a time until you reach the eaves. Pry out any remaining nails that are left in the sheathing after the shingles are removed. Leave the metal drip edge in place if one already exists.
Read Also: How To Apply Silicone Roof Coating
Energy Efficiency And Eco
As homeowners become more aware of the wider environmental effects of heating and cooling their homes, many begin to prioritize efficiency as both a means of saving money and protecting the environment. Metal is a highly reusable material, with many metal roofs being made of about 30%60% recycled metal. Their high durability also means they dont need to be replaced as often, whereas torn and damaged asphalt shingles end up in the landfill.
Additionally, since most metal roofs are reflective, they direct the heat of the sun away from the building they cover, blocking heat and lowering cooling costs. Even non-reflective metal can be treated with special paint that blocks UV rays. Experts typically estimate that youll save about 20%30% off the cost of cooling your home in the summer with a metal roof.
Read Also: How Much Do Solar Panels Cost?
Additional Costs Of Felt Roof Replacement
If you are refelting your roof, there are some additional costs that you might need to be aware of before you start:
- Structural damage to the roof itself will need to be dealt with, at an additional cost.
- Additional time that any tradespeople spend refelting will be charged at an hourly rate.
- Scaffolding is sometimes needed to access certain roofs and comes at an extra cost.
Also Check: Are Metal Roofs Hail Resistant
Can I Replace My Roof Myself
Many do-it-yourself homeowners wonder if they can lower the cost of a replacement by doing it themselves.
It is never recommended to take on the challenge of replacing a roof unless you are a trained roofer with years of experience.
If you’re inexperienced or you’ve watched some “how-to” YouTube videos, and you start tearing off shingles, you’ll likely end up doing more damage and spending more money than you would have if you hired a professional in the first place.
There are also several safety concerns involved when it comes to working on a roof.
If you’ve never done it before, you could end up seriously injured.
When you hire a local roofing company, you’re getting professionals with the experience necessary and can back up their work with a warranty.
This will save you time, money, and stress.
Can Roofs Be Flat
A flat roof is a roof which is almost level in contrast to the many types of sloped roofs. The slope of a roof is properly known as its pitch and flat roofs have up to approximately 10°. Flat roofs are an ancient form mostly used in arid climates and allow the roof space to be used as a living space or a living roof.
You May Like: Does The Red Roof Inn Have A Pool
Why Is There Such A Wide Pricing Range For Asphalt Shingles
On the low-end, you may have some roofers underbidding their jobs because they are either desperate for work or they happen to work strictly on volume with razor-thin margins.
For example, a contractor that is just starting out may be more willing to complete a roofing job for less than a more established company would. There are also many smaller companies with no real office and little overhead, hence they can afford to charge less for a job and still be profitable.
Note: A low bid for a roofing job, such as a bid that is significantly less than $4.00 per sq. ft. or $400 per square of shingles, can also come from a so-called weekend warrior or storm chaser who works without any liability insurance and with no workers comp, which could be a liability for the homeowner.
On the high-end of the price range, you may have bids for fully warrantied jobs from larger, highly reputable exterior remodeling companies that only install high-end products from premium brands such as CertainTeed Landmark PRO or premium shingles from Malarkey and have top certifications from their respective manufacturers.
There are many smaller roofing contractors that offer good quality products and quality workmanship at more affordable prices. If you are looking for value and quality, look for certified installers from manufacturers like GAF, Owens Corning, and smaller brands like Atlas, Tamko or IKO.
Are There Any Viable Alternatives to Composition Shingles?
How To Repair Shed Roof Felt
Asphalt roofing felt is an extremely cheap and durable option for your shed. If you have it, you already know how easy it is to install. However, you do get what you pay for in terms of durability.
The thickness of asphalt felt lends itself to leaks or damage from storm debris. Lets have a look at how to fix asphalt roofing felt issues.
Read Also: How To Clean Black Algae From Roof
A Word On Health And Safety
Many of the other shed roof repair guides on the web dont mention health and safety which is strange to us. Why? Because theres nothing more important than making sure you stay safe when doing work like this. Shed roofs especially broken or damaged shed roofs are not equipped to support the weight of a full-grown man or woman. For this reason, you should stay away from the roof as much as possible and do the work while standing on your ladder instead. Make sure you let your family, friends or workmates not to go in the shed while youre doing the work so they stay safe. Ideally, you should also have someone with you to hold the ladder while youre working. For more information on health and safety, read the Health and Safety Executives guide to walking and working on a fragile roof .
Create The Starter Course
Cut the tabs off of a sheet of shingles and nail the remaining portion of the shingle to the bottom edge of the roof so it extends approximately 1/4 inch past the edge. This creates the beginning of what’s known as a starter course and covers the edge of the roof completely. Do this on both sides of the roof with as many shingles as necessary until the bottom edge is covered completely.
Recommended Reading: How To Remove Green Mold From Roof
Can You Repair A Shed
Unfortunately, even the best garden shed can be plagued with troubles after some time. But are they repairable? Lets take a brief look at some common reasons for typical barn repairs.
Water/moisture damage and rot: The best way to correct this kind of problem is by replacing the rotten wood or timber with new, treated wood. If its just sagging roof panels or the floor, this is less of a problem. If, on the other hand, its the foundation or frame or the structure itself has extensive water damage, a replacement shed is likely a better option.
Rust patches: If you have a steel shed, one thing you might encounter is rust. Small patches can be sanded or filed to remove the rust. Then, its best to seal the areas with a rust sealant. For more extensive repairs, you might get replacement panels or frame members. On the whole, its cost-effective and straightforward to repair a shed made of steel.
Pest problems: Pests, including termites, insects, mice, and rodents, can be a problem with wooden sheds. Pest removal can be costly. It depends on the type of pest, but termites could potentially damage the structure, or pests might leave behind potentially toxic waste, which could cost a lot of money to repair. The smart option in such cases, to save money, is to tear the shed down and have another one built.
Is It Possible To Refelt A Shed Roof On Top Of Existing Felt
When felting over existing feeling, it is recommended that you use a biting primer to ensure a thorough fix. Some felts are also a three-layer system, which allows them to be applied over old felt nevertheless, if he has quoted for old felt to be removed, that is exactly what he should have done. Any old felt roof must be thoroughly removed and reboarded before the new one can be installed.
Read Also: Do Solar Panels Cool The Roof
How Do I Estimate The Cost Of My New Roof
If you want to get an idea of what it might cost to replace your entire roof before you call the experts in, there are a few things you need to take into account.
First, you need to consider the size and shape of your roof.
If your roof has a steep pitch or multiple levels, the price of replacement will be higher than flat roofs or one with a lower slope.
The size of your roof also affects the roof replacement cost. The more square feet you have to cover, the more it’ll cost to replace it.
Another major factor affecting your cost is the roofing materials you decide to use.
Just about 75% of homes in the U.S. choose asphalt shingles.
Asphalt shingles are typically the most affordable shingle type to use.
If you decide to use other roofing materials like metal roofing, concrete tile, shay tile, cedar shakes, slate shingles, or another premium roofing material, your costs will go up.
Average Repair Cost Countrywide
According to a survey undertaken by HomeAdvisor, the average repair cost for a barn or shed is $957. However, the actual range of repair costs reported by HomeAdvisor members is between $461 and $1,453. Heres a list of some typical shed repairs to help you estimate the cost:
Cracks or problems with the foundations: $500 to $1,000
Vinyl siding damage: $1,050 to $2,100
Interior damage: $200 to $700
Wall straightening that means bracing and jacking: $2,000 for materials and $10,000 for labor
Recommended Reading: How Can I Finance A New Roof
Greater Longevity And Durability
Perhaps the number one reason homeowners look into metal roofing materials is for their longevity. Any homeowner who has had to replace shingle after asphalt shingle knows that traditional roofs have a lifespan of between 15 and 30 years. Metal roofs, on the other hand, tend to last between 30 and 50 years.
Additionally, while metal roofs can become dented, it typically takes quite a bit of pressure to do this. By contrast, it takes much less force to tear or damage asphalt shingles.
Cost To Redo A Roof With A Different Type
If you are replacing your existing asphalt roof with a roof type that is heavier, like slate or stone tiles, the potential exists where you may need some structural reinforcement for the rafters and joists in the roof framing structure to support the additional weight. The reinforcement alone will average between $500 and $1,500 depending on the size of the home and the amount of reinforcement needed. Add the cost for your chosen roofing material plus labor on top of that.
Also Check: Will A New Roof Lower My Home Insurance