Is There Any Distinction Between Commercial And Residential Standing Seam
There is no distinction in standing seam roofing for property or business structures. You can utilize a vertical seam metal roof on your house or business. Nevertheless, it should fulfill the minimum pitch requirements.
Typical Expense to Set Up a Standing Seam Metal Roofing System
- Average Expense $17,000
- Low Cost $8,500
Kynar Paint Technologies Allow Metal Roofing To Retain Its Like New Curb Appeal For Decades
At McElroy Metal, were proud to have one of the most robust roofing product lines in the industry. From exposed fastened to standing seam and even insulated metal roofing systems, weve got you covered.
In fact, we even offer products for unique applications like curved standing seam panels, patented recover solutions and panels that can be jobsite roll formed to allow continuous panel lengths up to 250 long.
Learn more about our product options below or simply Contact Us, were here to help.
Price And Value Come Together With Universal Standing Seam Steel Roofing
Universal Standing Seam panels are 16 wide, making them work well on both large and small structures. The 1.5 tall interlocking vertical seams offer great watertightness even on lower pitch roofs. Installation is made fast and easy with the built-in fastening hem that is concealed from view yet has slotted holes to naturally allow for the metals expansion and contraction, no matter how wide of temperature swings your reign is prone to experience.
The Universal steel, metal roofing panels come in custom lengths produced at the factory specifically for your building. We also offer standard length panels which work exceptionally well for smaller accent roofs such as porches and overhangs. They can either be cut on the job site to match your building requirements or be joined together with horizontal laps. Our many available colors have been carefully chosen to offer something for virtually every home or accent roof.
Our robust baked-on PVDF coatings have been designed for top performance in all climates. Include our fade and chalk resistance warranty, Universal Standing Seam will be a long-term, reliable roof for your home.
Outstanding performance, with an outstanding warranty, are built into every Universal Standing Seam project.
You May Like: How Much Does It Cost To Replace A Roof
Standing Seam Roof Durability
There is no material more capable of protecting a structure from wind, rain, hail, fire, insects, or rot than a standing seam metal roof. One of the great advantages of standing seam roofs in particular, is that the seams, the weakest point in any roof and a potential entry point for moisture, are raised above the level of the roofing panel.
Additionally, because the metal panels run unhindered from the top to the bottom of the roof, not only are there no horizontal seams but in total the roof has a far fewer number of seams than other roofing systems.
Components Of A Metal Roofing System
A metal roof has a number of components that go into completing the roofing system. The following are the different sections, starting from the top of the system, and working down towards the framing:
Recommended Reading: How Long Does A New Roof Take To Install
Standing Seam Metal Roofing
Within the metal roofing family are standing seam metal roofing panels and these panels contain both male and female legs that are installed with clips to the substructure of your roof. There are also some options that have clipless panels. Both of these options do not use exposed fasteners while the panels are being installed.
There are many different types of projects and applications that standing seam systems can be used for. Since this type of roofing system has interlocking seams that connect the roofing panels, the roof gets a very unique and appealing look.
Another benefit is these seam systems are made from high quality materials that provide homeowners with a very low-maintenance roofing system. Standing seam metal roofing is also incredibly durable and weatherproof.
Read Also: What Is The Best Type Of Roof Ventilation
Standing Seam Panels Cut Lengths & Trim
Our calculator makes a 3d-model of your roof, based on sizes and roof slope, and divides this 3d-roof into panels of exact length and width.
If the width of your roof is 10.3 panels, our calculator will always round it up to 11 panels. This is to make sure you do not order fewer panels than you need.
If you have a hip roof, you will need multiple panels of different length, which is taken into account by our 3D-roof model, and you will get complete and accurate cut list of all the different sizes.
Standing Seam Roof Calculator will also provide the length of Ridge/Hip caps, drip-edge , gable trim, and z-bar flashing all are essential parts of a standing seam roof installation.
Don’t Miss: What Is A Roof Cap
Standing Seam Vs Corrugated Metal
Standing seam roofs are generally made from thicker grades of steel than corrugated steel roofs. While many corrugated steel roofs are made using the thinner 29-gauge steel, a minimum of 26-gauge G-90 galvanized steel or Galvalume steel is used for manufacturing of standing seam metal panels.
A 24- and 22-gauge steel can also be used for high-end residential and commercial applications including architectural and structural profiles.
A mid-panel stiffening technique is sometimes employed by the sheet metal fabricators, suppliers and manufacturers for a 16 inch and wider standing seam panels in order to prevent oil canning of the panels.
A metal coil from which standing seam panels are manufactured is usually factory painted with a high-end Kynar 500 paint finish. this is unlike its close cousins corrugated and ribbed metal roofs that are often painted with cheaper, polyester or acrylic paints.
Is a new standing seam metal roof in your homes future?
You Can Hear Rain Hit A Standing Seam Metal Roof
The next con is one of the most asked questions for anyone interested in a standing seam metal roof. This is the noise factor of a standing seam metal roof when it rains.
Unfortunately, theres an echo when rain hits a standing seam metal roof. Solid roof decking dulls the echo because the wood between the metal panels and your ceiling helps absorb some noise.
Adding wood fiber insulation boards between your roofs decking and your metal panels also helps absorb the sound of rain. But even though these boards provide an extra noise barrier, they wont completely block out a heavy downpour.
Theres no way to avoid the fact that a standing seam metal roof makes some noise when it rains. So, even if you do what I mentioned above, its impossible to completely drown out the sound of rain from a heavy thunderstorm.
Recommended Reading: How Much Does It Cost To Replace Roof Sheathing
Can Be Harder To Repair Or Replace
If damage or another issue occurs with one panel or a smaller section of the roof, it can be tough to replace efficiently because each individual panel must be separated from the ones that are staying on the structure. This process can be especially tedious for mechanically seamed systems, as each panel will need un-seamed and any sealant will need to be broken through and removed.
Costs Of Standing Seam Metal Roofs Compared To Other Metal Roofs
Thu, Jan 8, 2015 @ 07:30 AM|Perry
Metal roofing systems are more expensive than most asphalt, wood or tile roofs. There are also differences between the costs of various metal roofs. Look at the differences between roofing systems to understand the costs and benefits between standard metal roofing and a standing seam metal roof.
Standing Seam Metal Roof
While prices will vary by location, a standing seam metal roof may run within $5 to $9 per square foot. Prices range by the overall quality of the system and the metal material used to manufacture the roof panels. Galvanized and copper are usually the most expensive choices in material selection. Copper can run up to $20 per square foot.
The labor involved in installing this type of roof is extensive and the system must be installed professionally. With advances in technology and on-site material forming, the price of standing seam panels is decreasing. Do make sure to get an up-to-date quote before thinking that this system is too expensive.
Agricultural Pole Barn Metal Roof
A pole barn or corrugated metal roof is normally the least expensive type of metal roof to have installed. Prices for steel sheeting run about $4 to $5 per square foot. This system is used more frequently in commercial applications, as it does not offer the stylish look most homeowners desire. Sheet metal is also not suitable for complex roofing systems, as it does not work well around penetrations or valleys.
Metal Shingle Roofs
Read Also: What To Look For In A Roofing Contractor
The Process To Replace Your Roof
The day your standing seam metal roof is installed is the most important day in the life of your roof. It must be installed using correct metal roofing techniques to truly give you peace of mind. But what does the standing seam metal roof replacement process look like?
The first step to your metal roof replacement is getting all the metal roofing materials delivered to your home. Then your local roofing contractor arrives on the day of your replacement and makes sure all the vehicles are moved out of your driveway or garage.
After making sure everything is clear for them to start, theyll start setting up protection for your property and begin the tear-off process. After your old roof is torn off to a clean decking, theyll begin installing all of your new roofing materials and your standing seam metal panels.
Once your new roof is properly installed, your contractor will clean up your property and inspect your new metal roof to ensure the workmanship reaches the high standards you expect.
This is a quick breakdown of what you can expect on the day of your standing seam metal roof replacement. To gain a better understanding of how your new metal roof will be installed, read this article on the 6-step process to install your standing seam metal roof.
Standing Seam Metal Panels In A Nutshell
Standing seam is a high-end upgrade and an undisputed step up in quality and longevity from the classic corrugated and ribbed style metal roofs. Unlike its predecessor, corrugated steel roofing, which is still being widely used today for many commercial, industrial, and even some residential projects, standing seam has an improved design featuring concealed fasteners.
The ingenious design of standing seam metal roof featuring its characteristic raised seams, with no exposed screws in the roof, helps minimize the chance of a roof leak down the road.
| New Shingle Roof |
|
See costs in your areaEnter Your Zip Code |
You May Like: What Is A Parapet Roof
Cost To Remove Old Roof
Unless your home is a new construction project, it already has a roof. Roofers will have to do a roof replacement, which involves removing the old asphalt shingles, wood shakes, or whatever material you had before.
Removing an existing roof typically costs about $100 to $165 per square of material to be removed.
How Does Standing Seam Compare To Metal Shingles
Standing seam metal roofs can sometimes cost 20% to 30% more to install than metal shingles on more complex roofs. This is largely attributed to a more tedious labor necessary to install standing seam panels on a more complex roof with multiple dormers and valleys.
In terms of performance, there is no significant difference between the two systems, however the quality of your installation and strict adherence to your systems manufacturers specifications is by far the single most important factor determining longevity and performance of any residential or commercial, high-end metal roof.
Recommended Reading: What Do Roofing Nails Look Like
Standing Seam Roof Guide Part : Panel Design
If you are tired of re-roofing your home and want to do it for one last time, you are most likely considering a Metal Roof. After all, they do last a lifetime, and standing seam is the most common and economical form of metal roofing used in Texas and the rest of the United States. Itâs a great roof style for Texas, that is popular in San Antonio, Hill Country, Coastal Bend, and The South Texas Valley.
Standing Seam Metal Roofing Cost
What is the average cost of a standing seam metal roof? This is a tricky question as there are lots of factors that will determine the price of a standing seam roof. Two factors go into the cost: installation cost and material cost.
The short answer is that standing seam will cost $8 to $15 per square foot including materials and installation.
Also Check: What’s The Cost To Replace A Roof
Dimensions And Metal Thickness
- Standard panel width approx. 530 mm
- Common panel widths 400 mm to 600 mm
- Metal thicknesses 0.7 mm/0.8 mm
- Normal panel length up to 10 m
- In special cases up to 16 m
- Standard transport length is 7 m
The international standard size for roofs in double standing seam systems is a panel width of approx. 530 mm and a metal thickness of 0.7 mm. We recommend limiting the panel width to 430 mm and the metal thickness to 0.8 mm for mono pitch roofs with overhangs based on practical construction experience. This measure prevents noises that can occur in strong winds due to the natural curvature of the panels.
The generally common maximum panel length is 10 m. Using our clips, this can be extended to 16 m. However, the roof inclination then remains limited to max. 30°. In this case, panel attachments and connection details must be adapted to the increased length variation.
If the max. possible panel length is insufficient, individual lengths can be connected using cross seams.
Also Check: Is Tesla Solar Roof Available
Getting A Standing Seam Metal Roof Raises Your Homes Curb Appeal
The last pro on this list is what a standing seam metal roof does for your homes curb appeal. A standing seam metal roof has a higher curb appeal and a more visually appealing look than the standard 3-tab or architectural asphalt shingles.
Getting a standing seam metal roof over your entire home drastically increases your homes curb appeal. But because of the cost, this isnt an option for a lot of people.
Thats why homeowners choose to use a standing seam metal roof over front porches, side porches, back porches, bay windows, and more to take their asphalt roofs look to the next level. No matter where you decide to install a standing seam metal, it will improve your homes curb appeal.
Don’t Miss: What Is The Best Metal Roof For A House
Final Thoughts On Standing Seam Metal Roofing
Standing seam metal roofings variety of options and versatility makes it an excellent choice for virtually any building type, including commercial, residential, architectural, structural, and beyond.
To wrap up, what makes standing seam metal roofing different are these four parts:
- A concealed fastener
Benefits Of Standing Seam Metal Roofs
Most standing seam metal roofs are field-locked systems, which require a special seam locking tool and an experienced metal roofing installer. While the initial cost of materials for a standing seam metal roof is higher than asphalt shingle roofing or other standard roofing materials, the longevity is far superior.
last two to three times longer ROI of 85.9%.
Metal roofing can also lower your insurance rates because of its fire resistance, especially in states like Texas and California that are vulnerable to wildfires. Standing seam metal roofs can last from 15 to 60 years depending on the which type of metal roofing you decide to install.
Major benefits of installing a standing seam metal roof include:
- Life expectancy of 15 to 60 years
- Up to 90% return on investment
- Resistant to cracking, shrinking and eroding
- High performance in extreme weather, including heavy snow, hail and fire
- Contemporary appearance
Find Local Pros
Read Also: How Long To Install A New Roof
Standing Seam Metal Roof Costs
Depending on the slope, pitch, and height of your roof, the estimated cost of installing a standing seam metal roof ranges from $23,000 to $30,000. On a standard sized single story house, plan to pay $8 to $14 per square foot or $800 to $1,400 per square installed. The cost of replacing a roof is dependent on a number of factors.
How much does a standing seam metal roof cost?
The majority of standing seam metal roofs are field-locked, which necessitates the use of a special seam locking tool and a skilled metal roofing installer. The cost of installation varies depending on where you live and how many specialists are available in your region. You will also need to remove the old roof to add a new metal roof, which will incur a tear-off and disposal fee. In certain cases, you might be able to save money by installing a metal roof over an existing asphalt roof. For quotes, contact local standing seam metal roof installers, but expect to pay at least a few thousand dollars for labor.
