Wednesday, September 21, 2022
HomeExclusiveCan You Put Metal Roofing On A Flat Roof

Can You Put Metal Roofing On A Flat Roof

Advantages Of Using Rolled Roofing

Should I use a metal roof or flat roof? – Legacy Flat Roofing & Sheet Metal

Rolled roofing is the cheapest roofing material, and its installation cost is almost free. Owners of the sheds and shops who want to install the roof prefer to DIY. The nails are also cheap, and the top can last for some time before it expires.

The roof is easy to install because it comes as one rolled material. When installing, you place the entire roll on the top and unfold it. Unlike other roofing materials such as shingles, you have to lay them down one by one and nail them on the roof.

Rolled roofing is lightweight and easy to transport. When packing, the manufacturer seals the rolls tightly to prevent unrolling during movement. So, you can carry an entire roll up the roof if you are doing it yourself, unlike roofing shingles which need a crane.

You can re-roof your current shingles with a rolled roof. This saves on the labor cost of removing the shingles first and also time. Laying a rolled roof on the shingles also gives more protection. Ensure you clean the top first to avoid destroying the new roof.

Reviews Of A Washington Dc Rubber Roofing Contractor

“I recently had my roof, gutters and siding replaced. Ryan and Juan were respectable and knowledgeable men. They paid close attention to detail and were very patient. Seth scheduled the delivery of material. It was on time and they took special care to not damage my lawn and flower beds. If you are looking for a company that is knowledgeable, patient, kind, experienced and provides excellent and high quality of work, look no further, Capitol Improvements is it.” -Ninotchica A.

  • Washington, D.C.
  • Thermoplastic Polyolefin
  • Ethylene Propylene Diene Monomer
  • Polyvinyl chloride

New Metal Roof Over Old Metal Roof

The use of metal roofing has been growing in popularity over the use of other types of roofing due to the lower cost and longer life span. The durable metal materials that make up most roofs have proven to cost less in terms of installation and maintenance.

However, these materials also reach a limit to their longevity and eventually need to be replaced. Because of the structure of these types of roofs, home and business owners are met with 3 options. First is to replace the entirety of the roof by tearing off the old roof and putting in place a new one. The second is to restore the old roof by coating it with new paint or waterproofing material. The last option involves retrofitting a new metal roof over the old roof.

Read Also: How To Fix A Rubber Roof Leak

Does The Company Carry Workers Compensation Insurance

When looking for a roofer, you should always prioritize companies or contractors that have workers compensation insurance. Doing this will save you from a lot of hassles and financial worries in the event of an accident on the job. A roofing company that offers insurance coverage for its workers can easily take care of their injuries while on the job. However, in the absence of this insurance coverage, you may be looking at a premises liability case that will cost you a lot of money.

Severe Hail Can Ruin Metal Roofing

Can you install a metal roof over shingles? Absolutely ...

Although metal roofs are considerably more durable and maintenance-free than asphalt shingles and other forms of roofing, they are not indestructible. There is one weather condition in particular that bodes ill for metal roofing: large hail. Aluminum and copper, in particular, can be susceptible to denting when hailstones approach golf-ball size. Steel is harder and fares better in hailstorms, but if you live in a region where such catastrophic hail can occur, be aware of this when considering metal. Pea-sized or even dime-sized hail is rarely a problem, but hailstones larger than this have been known to ruin metal roofs.

Then again, large hail can also destroy an asphalt shingle roof, so if you make sure to have good homeowner’s insurance that covers such storm damage, there is no reason not to install metal roofing.

Recommended Reading: How Much Is The Average Roof Cost

What Is The Longest Lasting Flat Roof

PVC Single-Ply Membrane

The most popular flat roof material is a PVC membrane. It is designed to last between 15 and 30 years, making it the longest-lasting flat roof material you will find. It should come as no surprise that many commercial roofing contractors will only install a flat roof if it is PVC.

Can You Install Metal Roofing Directly To Plywood

Metal roofing is affordable, durable, and easy to install. But deciding where and how to install it requires some knowledge of building materials and their potential pitfalls. Do you have to build a sub-structure for metal roofing, or can you install it directly onto plywood?

When installing metal roofing,you should always use a roofing felt layer between the metal roofing and the plywood. It is also advisable to use a slip sheet to protect the felt. You may be able to layer it on top of your current roofing, but you need to check with your local building codes before doing so.

Lets go over how to correctly install metal roofing over plywood. You will also find out what to look for when determining if the roof is stable enough to have metal directly installed over it.

Recommended Reading: How Much Does It Cost To Tear Off A Roof

What Kind Of Drainage Should My New Roof Have

When your roofer is planning out how to tie in a flat roof to a shingle roof, they will also have to choose between an external and internal drainage system. Most pitched roofs have external drainage, or a gutter system. Flat roofs may have external or internal drainage.

So, when you are combining these two types of roofs, what kind of drainage should you choose? It will depend on your specific roof, and factors such as the size of the flat roof, whether it is above a heated or unheated space, and more. Its best to work with a professional roofer to get the right solution for your roof.

That said, here are some things to consider when discussing drainage options with your roofer:

Bend Trim Ends Closed

EBP Metal Roofing – Garage Flat Roof
  • Before you install the trim, cut and bend the leading end to wrap it around the corner. Make a series of one-inch cuts with aviation snips at each bend to create tabs. Fold the tabs in with a hand seamer to meet a wall or a corner, or to close a gap created by the trim. Each trim is a different shape, requiring unique cuts and bends.
  • Install the eave trim tight to the fascia and fasten it to the roof deck over the underlayment with one-inch roofing nails. In warmer climates, the eave is attached before the underlayment. In northern Wisconsin, where ice dams are common, we install these atop the underlayment to protect the entire roof from dams.

You May Like: How To Get Rid Of Raccoons In Your Roof

Do Flat Roofs Cause Problems

A flat roof should actually have a slight gradient to allow rainwater to run off and have a decking of marine or WBP plywood. If your flat roof hasnt been fitted properly, it can lead to a variety of problems which occur over time such as water ingress, condensation, water pooling, cracking and thermal movement.

Flat Metal Roofing Is More Affordable

Not only is metal considerably less expensive than tiles to purchase, but flat metal roofs also require less material too.

Think about it. A flat roof inherently takes up less area than a pitched roof you wont have to worry about as many supports, beams or rafters.

This directly translates to fewer materials used, and that in turn leads to a less expensive project overall!

No doubt about it if youre cautious of your budget, flat metal roofing is a no-brainer decision!

You May Like: How To File A Roof Claim

Flat Roofs Are More Likely To Leak Or To Experience Water Damage

Some of the most common problems encountered with flat roofs can easily be prevented. Issues like leaking, pooling, and rot can be avoided through professional installation and proper maintenance. As long as the roof is installed correctly and well cared for, problems like these usually arent a concern.

Flat Metal Roofing Is More Versatile

Can You Put A Metal Roof Over Wood Shingles?

Unlike pitched or sloped metal roofing, flat metal roofs are very functional, especially if you want your roof to be more than just a shield from the elements.

In our experience, its much easier to install air conditioners, solar panels, and satellite dishes on metal roofs. And it gets even easier when said metal roof is flat too!

Installing these into a tiled roof often involves cutting out sections of tile and attaching mounting points to the beams and rafters underneath.

After this, youll need to apply many layers of waterproof material to ensure that no water gets in.

Read Also: What Is The Best Paint For Metal Roofs

Can You Put A Metal Roof On Your Flat Roof

Yes, you can put metal on your flat roof. Installing a metal roof over a flat roof area, over a porch, or for other accent purposes is considered an upgrade.

With that in mind, its actually fairly common for homeowners to put a metal roof over their flat roof or low slope roof. Everyone has their own reasoning for using metal on their flat roof.

Some homeowners want metal roofing for its lifespan and durability. Other homeowners like the look of metal and want to boost their homes curb appeal.

Some even want to use metal on their flat roof for both reasons. Whatever your reasoning, installing a metal roof on your flat is always a great option.

Just keep in mind, it will be more expensive than a membrane roof system that is also commonly used on flat roofs.

Can You Install Metal Roof Over Slate

MetalSlateinstalled overroofMetalSlatecanroof

. In respect to this, can you put a metal roof over asbestos shingles?

In order to be able to install your new slate shingle metal roofing panels over the top of your existing asbestos-containing roof, first, you must verify that the old shingles are stable enough to take the new roof.

Secondly, do you have to use furring strips for metal roof? When installing a metal roof over an existing roof, insulate the spaces between the wood strips with rigid insulation to prevent condensation before installing the roofing. You also need to add furring strips. Twenty-four inches is a common spacing of furring strips for a metal roof.

People also ask, how do you install a metal roof over shingles?

If you want to install steel over asphalt, your best choice for installing metal roofing is to use a steel shingle system like the one shown instead of the more common standing seam steel. In a standing seam roof, long, single panels run vertically all the way from the eave to the ridge.

Can you put a metal roof on a flat roof?

Metal Flat RoofingMetal is one of the most popular materials used for flat roof replacement. When it comes time to replace a metal roof, they generally have to be torn out completely. Roof contractors are not able to install a new roof on top of an existing metal roof. Metal roofs are also prone to rust.

Don’t Miss: Should Metal Roof Overhang Drip Edge

Is Osb Acceptable As Roof Decking For Metal Roofing

Oriented Strand Board, commonly referred to as OSB, is a type of engineered lumber similar to particle board, formed by adding adhesives and then compressing layers of wood strands. OSB is widely used as roof decking material.

A homeowner recently wrote and asked me the following regarding OSB roof decking:

Q. We are checking into a metal roof and we have a question that needs to be clarified. We heard that the metal will not stay on as well if you have OSB roof decking. Should it be a different type of wood? Is that true? We have also been told it will be okay. Just wanted some clarification.

Following is my response:

A. OSB in good condition will have every similar fastener pull-out resistance to CDX plywood. The problem, though, is that OSB tends to deteriorate fairly rapidly if exposed to moisture, losing fastener pull-out resistance.

So, what would expose it to moisture? Roof leaks, of course but also improper attic ventilation can cause condensation in the roof deck that can cause the OSB to weaken.

One option is to try some test fasteners in the OSB. If you get 45 or more pounds of pull out resistance, thats considered acceptable for most applications. If you have less than that or a lack of ventilation that threatens ongoing performance, Id replace the decking.

All this said always adhere to what your roofing manufacturer says. Do not do anything that might later void the wind warranty they offer.

Flat Roofs Create Space That Can Be Used In Many Ways

How To Metal roof for cheap

One thing that makes flat roofs unique is that they add usable space to a property. They can be transformed into gardens, patios, or green roofs. Installing solar panels on a flat roof is a simple process. Best of all, the panels are much harder to see on roofs like these, meaning that they wont detract from the look of the property.

Planning for applications like these should be done early on in the design process. That way, special features such as guardrails can be added. The roofing materials can also be chosen based on their ability to stand up to foot traffic and to bear extra weight. Depending on the local requirements for Anderson or Oconee County, a permit may also need to be obtained before installing features like these. In most cases, however, it is worth it since it creates extra space for you and your family to enjoy.

Don’t Miss: What Do You Do If Your Roof Is Leaking

How Much Does It Cost To Install Asphalt Shingles

New roof: Install 2,900 shingles, 20 year evaluation includes ear canal, all metal bumps and cones, frame, patch plates, nails, fasteners, felt boards and trim. Roof renovation: additional material installation costs of 40 years. $ pick up fee: 2,900 scrap. Disposal: transport costs for non-hazardous waste and disposal fee.

Spray Adhesive For Pool Table Felt

What If Im Installing A Flat Roof Transitioning To A Pitched Roof

While it is uncommon to have a flat roof home that transitions to a smaller pitched roof, they do exist. These roofs may look like Mansard roofs, but with a completely flat top.

The transition from a flat to a sloped roof is just as vulnerable as when they are reversed. Installing a new pitched roof to your flat roof will require a bridging membrane, just as we discussed above. Also, when installing this roof transition, it is more likely that your roofers will choose to add metal flashing to the joint between the roofs.

Flat roofs do not drain water as quickly as sloped roofs, so water will drain more slowly in this transition than the reversed roof planes. Metal flashing is a wise way to protect the rest of the roof from slow-draining water.

You May Like: How Much To Put New Shingles On Roof

Asphalt Roll Roof Systems

The most common rubber roof alternative for flat and low-sloped roofs is asphalt-roll roofing. Asphalt roll roofing is applied in sheets in a fairly easy installation process.

For this reason, asphalt roll roofing is popular for sheds and small buildings, as well as for do-it-yourself projects.

However, asphalt roll is only a temporary roofing solution, as it has a very short lifespan.

S On How To Install A Rolled Roof

The Basics of Roof Restoration

When you clean your roof and are ready for installation, these steps will help you.

Step 1: Mark the End of the First Layer with a Chalk Line

Measure 35 inches up the roof from the bottom with a measuring tape. Draw the chalk line across the top with a ruler but avoid using the eaves for guidance. That is because some of them do not have a similar height all through.

Step 2: Apply Cement on the Roof

Use a trowel to outspread a 1/8- 1/4 thick roofing cement. Start with the bottom to the top, working on small potions to ensure the job is perfect. Do not apply this using bare hands but gloves.

Step 3: Cut the Rolled Roofing with a Razor Knife

Ensure your rolled roofing lies on the chalk line, and then pull it up the roof and cut it to fit. It is a thick material, so you should apply energy when cutting.

Step 4: Cover the Roof with the First Layer of Rolled Roofing

When you stretch the roofing material, ensure there are no creases and wrinkles on it. Then, push it to ensure it sticks on the wet cement and nail the roofing nails leaving a 10-inch space in between. Ensure all the nails go inside to the roof, and no heads are peeping.

Step 5: Install the Second Layer

For better protection and functioning of the roof, install a second layer, repeating the first steps. This time, apply the cement below the second chalk line. When you are nailing this one, ensure the nail goes past the second and first layer into the roof.

Step 6: Secure the Nails

You May Like: How Do You Put A Tarp On A Roof

Do You Need A Vapor Barrier Under A Metal Roof

Vapor barriers are used to reduce the amount of condensation that can move through a material. When theyre installed properly, they can help reduce any problems that you have with condensation as well as air leakage on fiberglass-insulated walls. Without one, water can get trapped in the wall, which will produce moisture and ultimately other issues like rot, mold, and trouble with thermal performance. Vapor barriers are recommended for under metal roofs.

RELATED ARTICLES

Most Popular