What Is The Cost Of Metal Roofing Per Square Foot

Cost Of Metal Roof Materials

There are many materials available for metal roofing ranging from $4 to $30 per sq.ft. The materials come in many different styles. You will find large sheets of metal roofing as well as metal roofing that is made to look like shingles. Different materials have different characteristics and different costs. The chart below lists the different types of metal roof materials and their respective costs, followed by subsections that explain each.

How To Figure Out Your Roof Area

Now that you know all of the metal roofing prices per square foot, youll want to understand your roof area as well. Its not as simple as measuring the area of your house footprint. Dont forget you have a garage with a roof and slope to factor in. There are several online services that will give you detailed measurements of every aspect of your roof via satellite if you dont mind paying. If you want to do the math yourself this roof calculator makes it easy. You will just need a pitch measuring tool that you can get for free in the app store on your phone. If you are interested in an exposed fastener system, this steel roof cost calculator gives a pretty good ballpark in a few seconds.

QUICK TIP: The average roof size in Ontario is about 2000 Sqft. and the average metal roof costs around $8.00/Sqft. So the average cost of a metal roof in Ontario is $16,000.

Metal Roof Energy Efficiency

Metal roofs are one of the most energy-efficient roofing materials available. A metal roof is more energy efficient compared to asphalt shingles. Not only does a metal roof provide great insulation during the cold season, but metal also reflects sunlight, keeping energy costs down during the warmer months. Studies have shown that metal roof finishes reflect solar radiant. Expect to see a savings of 25% to -40% in your air conditioning bills. Although the initial costs of metal roofing are quite high, homeowners find that the energy savings make up for the high initial investment.

You May Like: Does Rv Insurance Cover Roof Leaks

Metal Roof Cost Vs Shingle Roof Cost

When choosing between a metal roof and asphalt shingles, you should compare them side-by-side to find the best fit for your home and situation. Asphalt shingles are one of the most popular types of shingles among homeowners due to their affordable prices. Asphalt shingles will last 15 to 25 years and come in several colors for easy customization. They are easier and faster to install than most shingles and very versatile. Unfortunately, they are prone to color loss/cracks and damage over time. Due to the heavy weight of the shingles, the previous roof needs to be removed first. Asphalt shingles are less durable than most and tend to absorb heat from the sun. Another con of asphalt shingles is that they are not recyclable and are made from petroleum.

Compared to asphalt shingles, metal roofing is more expensive up front. However, a metal roof will last at least four times longer than asphalt, needing little to no maintenance. A metal roof is much lighter and can be installed directly over the existing roof. Additional advantages to metal roofs are that they are energy-efficient, recyclable, and have longer warranties. The cons to metal roofing include their cost, difficult installation, and repair, and you need proper insulation to avoid loud noise on the roof.

How Is Metal Roofing Priced

Metal roofing and other types of roofing are based on cost per square.

Metal roof pricing for cost per square is calculated per square foot and then that is added up into the cost per square which is definitely something to pay attention to and understand when you are pricing out or looking for a new metal roof, or perhaps, more importantly, talking to metal roofing contractors or roofing companies about installing a new metal roof.

When you are deciding what type of metal roofing to purchase and install, keep in mind that while there are options at a variety of price points, the cost of metal roofing is a literal investment in the roof over your head as well as the roof over your family or employees and customers heads.

Recommended Reading: Can You Finance A Roof

How Much Is An Elastomeric Membrane Roof

Seeing as installing an elastomeric membrane can be done at practically any time of year, it is often the go-to roofing choice for Canadians. Besides its installation being highly practical, there are many benefits to choosing this material. For instance, seeing as it is installed in 2 layers, it is more durable for accessible rooftops. This elastomer coating can last from 25 to 30 years and requires fairly low maintenance, rendering it a pretty good investment.

However, this process isnt without downsides. It requires highly specialized contractors and there is a fire risk. Additionally, the material isnt a friend to the environment and is not recycled in Ontario, nor Quebec. As for its cost, elastomeric roofing can cost up to $25 per square foot.

Standing Seam Metal Roofing:

G90 Steel Standing Seam Expect to Pay: $19 $25.00 CAD per square foot installedAluminum Standing Seam Expect to Pay: $24 $30.00 CAD per square foot installedAluminum Standing Seam with Concealed Fasteners: $30.00+ per square foot installed and up depending on difficulty

Exotic Metal Roofing: example of a shingle style copper roof on a church.

Also Check: How Many Feet In A Roofing Square

Metal Roofing Costs Vs Shingles

The costs of metal roofing versus the costs of asphalt shingles or other types of shingles are somewhat dependent on your location and the type of property that you have, along with your initial starting budget.

Also, you should keep in mind that metal roofing has a much higher resale value than some other types of roofing, so consider that when you are choosing what type of roof you want to install on your home.

If you are choosing between metal roofing and shingles, keep in mind that metal roofing can be a great choice, because it can pay for itself via energy efficiency.

A metal roof can result in decreased home cooling costs, and it also has a great resale value due to its reliability and longevity.

With a metal roof, you will most likely not have as much of a need for maintenance and repairs, and you will probably not need to replace it as quickly since metal roofing tends to be fairly low risk in regard to premature roof failures and the subsequent need for replacement.

Metal roofing also tends to have a positive resale value if you change your mind or want to replace your roof for aesthetic reasons.

The national average for metal roofing costs around $18,500, but the resale value can possibly offset some of the costs of the initial install.

The lifespan of a metal roof can last from 38 60 years.

Standing Seam Metal Panels

In recent years, the popularity of standing seam roofing has skyrocketed, making it one of the hottest new materials, especially for contemporary style homes. However, it looks just as beautiful on classic colonial, cape and ranch houses.

You may notice that there is a HUGE range in total installation cost for different standing seam panels. The truth is, a standing seam roof can be relatively inexpensive on a simple ranch-type house, if you use 26 Ga steel.

See Costs in Your Area!

Start Here – Enter your zip

Most homeowners pay about $10-12 per square foot to install a standing seam metal roof.

However, if you install standing seam onto a rather complicated roof the total cost will suddenly skyrocket especially if you go with aluminum. If you want copper or zinc panels, expect to pay well over $20 / sq.ft.

Standing seam panels are readily available across the US, and can come from a variety of sources. For example, big manufacturers like ATAS International, Drexel, Englert, MBCI, etc., local Sheet Metal Shops, and even individual roofing contractors, who own a roll-forming machine and can supply the panel for you. Additionally, there are many online stores selling standing seam, that can ship it to your house from halfway across the US. Thus, prices can vary greatly.

We buy our panels from local roofing suppliers and pay about $265 for 24 Ga Steel to $325 for .032 Aluminum.

Don’t Miss: How To Raise A Roof On A House

Which Metal Roof Is Right For Your Nashville Tennessee Home

Remember, both metal roof systems have their place in the roofing industry, but a standing seam metal roof is the recommended choice for residential purposes.

The reason for this comes down to the expansion capabilities of the two types of metal roofs.

A standing seam metal roof systems panels are locked together at the seams or seamed mechanically. Under each rib is a clip that fastens the panels together and allows them to glide back and forth freely as the metal goes through thermal expansion.

But because a screw down metal panel is screwed through the metal, theres no room for expansion and contraction. Without the ability to expand and contract freely, the screws will eventually wallow out the holes in the metal panels, and youll periodically have to pay to replace the screws with the next size up.

Even though a standing seam metal roof can be installed as a new roof, Nashville homeowners also like to use a standing seam for accent purposes to boost their curb appeal. Its popularly used for front porches, side porches, back porches, and bay windows.

Screw down metal roofs are usually used over a carport, garage, back screened-in porch, barn, anywhere thats not a living or workspace. However, youll find contractors that will install them over homes.

Can you install a screw down metal roof over a living space? Yes. However, its going to be expensive to maintain and will be more prone to roof leaks.

Calculating Patio Roof Costs

The average cost to install a new patio roof ranges from $1,037 to $2,445 depending on the size and materials used. A small living room patio with asphalt roofing installed will cost $605 while a large outdoor dining patio with a metal roof costs $3,712. Of the four most common patio styles, the two that are generally considered large enough to warrant a roof include:

• Living room patio – Average size is 16 by 18 288 sq. ft
• Outdoor dining patio – Average size is 12 by 14 168 sq. ft

Patio Roof Costs

• Class A 21 to 45 feet long
• Class B 16 to 25 feet long
• Class C 20 to 35 feet long

Don’t Miss: How Much For A Porch Roof

Metal Roofing Installation Diy Vs Professional Installation

Metal roofing can be done by DIYers or require professional installation depending on the type of panel being used. Certain panel types require a strong level of experience to adequately install, while panels like 3 Tuff Rib or Nail Strip can be installed relatively easy by an enthusiastic homeowner with a basic understanding of building and construction.

While installing a roofing system yourself may save up to 50% of the cost of a completed metal roof, a poor installation can result in terrible consequences. For this reason, installing a roof without professional assistance should be carefully considered before moving forward.

Panel types with easier installation include the following:

• 3 Tuff Rib

Roof Replacement Or Repair

Should you repair your roof or just replace it? if your roof is relatively new and the repairs required are simple, then by all means opt for a repair. However, if your roof is more than 2 decades old and requires major repairs that will cost you a substantial amount of money, a full replacement may be necessary. Consult a roofing expert for an evaluation so you can decide which course of action to take.

Recommended Reading: How Much Is The Average Roof Cost

Maintenance And Repair Costs

One of the most attractive features of a metal roof is that it requires practically zero maintenance. If you have a corrugated metal roof, you may need to re-tighten the screws about every 10 years. All other types of metal roofs are truly maintenance free. For most homeowners this is a breath of fresh air, as no one wants to spend their free time taking care of their roof.

When it comes to repairs, its important to note that in most cases a metal roof will not require repairs, because its designed to be a water shedding system. This means that its impervious to damage from leaks and ice dams, and therefore should not need to be fixed.

However, there are cases when faulty installation can compromise the integrity of a metal roof, and you will start to get problems like leaks, etc. Fixing a metal roof is expensive pros charge at least $500 to fix a metal roof. However, depending on the type of system and complexity of the problem, the total price can be a lot higher. For example, if you need to take apart standing seam panels, repairs can cost thousands, because its such a hard job.

Ultimately, you should invest into high quality installation to avoid any costly problems and repairs down the line.

How To Estimate The Cost Of Your New Metal Roof

Of course, the cost of a metal roof also depends on the size and shape of your roof, your local market rates, the type of home you have, and any other special conditions such as unique climate or weather factors like wind damage on your roof.

The thickness of the metal roof, the roof type and quality of the paint finish that you choose, and the unique shape, details, and other factors that make your roofing project unique all play a role in the cost of your roof as well.

All of that said, you can begin to estimate based on the aforementioned costs and start to assume that your new metal roof will cost around $12.00 $13.00 per square foot, and a typical single-family home requires between 1,500 2,000 square feet of metal roofing , so you can assume that your new roof will cost between $18,000 $26,000.

There are less expensive or cheaper metal roofing options like corrugated steel or ribbed steel as well.

Read on to learn more about the various types of metal roofing, which range from high-end standing seam metal panels to metal shingles and everything in between.

The most important thing is to find something that fits your budget, style and will provide the best protection as the literal roof over you and your familys heads.

Read Also: How To Estimate The Cost Of A New Roof

Steel Shingle And Shake:

In Canada there is a wide range of steel roofing products designed for residential use. G90 is the accepted standard for roofing. G110 and G115 will perform better against acid rain or in marine environments. A high-end steel system will not need battens and strapping for installation, and panels will be interlocking . A galvanized steel roof with interlocking design and PVDF finish will have a better life expectancy than cheaper steel options. Coatings on a high-end steel system sometimes include reflective pigments to enhance energy efficiency. Keeping in mind that there is no steel roofing product that unconditionally guarantees against rust, cosmetic life is shorter than functional life.

Maintenance Required: Optional, re-paint to cover rust.Re-Roofing Cycles Over 50 Year Period: 1 if corroded through back of panel.Expect to Pay: $10.00 $13.00 CAD per square foot installed.

Example of a Shake Style Aluminum Roofing System. Other aluminum variations include shingle, slate and tile styles.

Metal Roofing Cost By Product Type

There are 4 main categories of metal roofing in Ontario: Exposed Fastener, Concealed Fastener, Standing Seam and Agricultural Panels. The list below explains the characteristics, options and typical prices of each. Price to install in Ontario is provided in tables at the end of each description.

Note: If you are a DIY expert and want an idea on how much materials will cost budget for about 1/2 of listed installed prices. Labour makes up a significant portion of the total price as installation requires skilled contractors with metalsmithing abilities.

Read Also: How To Install A Cupola On A Metal Roof

What Is The Labor Cost For Installing A Metal Roof

Labor costs and other contractor costs account for roughly two-thirds of the total price of installing a metal roof. According to data from Roofing Calculator, you should expect to pay between $350 and $400 per square for installation. A seam roof is more difficult to install and will set you back around $500 for the same area.

There are a couple of factors that could make your metal roof installation costs higher. If you have multiple chimneys or other roof features that make the roof more difficult to build, you should expect to pay more. Its also more expensive to install a high-pitch metal roof.

The Best Roofing Contractors In Nashville Tennessee

You now have a good idea of how much a new metal roof will cost in Nashville, which one is right for your home, and the lifespan of both types of metal roof systems. After reading this article, you should be ready to find a great roofing contractor in the Nashville area for your new metal roof.

Unfortunately, there are so many options in Nashville and Middle Tennessee. How can you possibly tell who a reputable Nashville metal roofing company is?

While we know we can take care of all your metal and other roofing needs, we understand were not the right fit for everyone. Thats why we wrote an article on the 7 Nashville roofing contractors were comfortable recommending to homeowners like you.

Since 1990, the team at Bill Ragan Roofing has provided high-quality metal roof installations and replacements in Nashville and surrounding areas. You can count on our workmanship and lifetime warranty to ensure your metal roof lasts for decades.

If you think were the Nashville roofing company for you, dont hesitate to contact us today.

If you dont think were the right fit or just want to know your options, here are the 7 Best Roofing Contractors in Nashville, Tennessee we recommend.

Recommended Reading: How To Install Roof Insulation