Monday, May 27, 2024
HomeEditor PicksHow To Screen In Patio With Roof

How To Screen In Patio With Roof

What Is The Material For Patio Cover

Build a Screen Porch on a Deck without Attaching to the House

Aluminum is the most popular material for patio covers because it is lightweight, durable, and requires little maintenance. Aluminum patio covers can be either solid or vented to allow for airflow, and they are available in a variety of colors to match your homeâs exterior. Wood patio covers are another popular option because they offer a natural look and can be stained or painted to match your homeâs exterior. However, wood patio covers require more maintenance than aluminum covers and are not as durable.

Canvas Shade Sail For Patio Roof

Simple yet elegant. This canvas shade makes a pretty good roof for the patio. It does not only accentuate the patio which gives it a more exquisite look, but also protect you when you feel like to enjoy the view of your backyard.

This patio roof features curtain tracks that are attached on each of the beams. They allow you to adjust the canvas shade as you please.

You can draw the canvas back to get natural light or close it so that the patio will be completely covered.

Cut Away The Overhang And Siding On House

If you have siding and a roof overhang on your house, youll need to cut those away in order to make room for the roof associated with your screened-in porch. The first part of this process is deciding and outlining exactly where you would like to attach the porch.

Next, you can cut away at the siding and overhang, setting the saw blade just deep enough to cut through. The goal is to cut through enough so that the innermost patio roof truss can fit against the wall, but not too much where youll have exposed siding. After youre finished, you can remove the siding and waterproof the slot with building paper.

You May Like: Is My Dryer Vent On The Roof

Wood Tiles & Wood Flooring

A wood floor on your patio will give it an attractive and warm appearance. You can also use wood tile instead of laying planks on the ground.

Also, if you want to give your house the wood appeal without using wood, buy ceramic tiles. You can find wood-look tiles that will look exactly like actual wood.

The upside of using ceramic wood-look tiles is that they are more durable than actual wood tiles. They are also cheaper than wood. For a wood plank floor, its best to use hardwood, considering that the patio is an exposed outdoor structure.

Is Alumawood Loud In The Rain

Home Hip Roof Patio Cover Plans Hip Roof Patio Cover Plans

Alumawood is made to be a durable, long lasting product that can withstand any type of weather condition. However, like any other outdoor furniture, it can become loud in the rain if it is not properly cared for. If you want to avoid this, make sure to regularly clean and maintain your Alumawood furniture.

You May Like: How To Calculate Roof Rafters

Should I Insulate My Porch Roof

The most important factor is the climate. If you live in an area with a cold climate, insulating your porch roof will help keep the porch warm and prevent ice and snow from accumulating on the roof. Insulating your porch roof will also reduce noise from outside and help keep the porch cooler in the summer. Another factor to consider is the size of your porch roof. A small porch roof may not need to be insulated, while a larger roof may benefit from insulation. Finally, consider the cost of insulation and the time and effort required to install it. Insulating your porch roof is a relatively simple and inexpensive project that can improve the comfort of your porch and make it more energy-efficient.

The Benefits Of Screening Your Deck

Installing a screen-in deck offers many benefits.

  • It adds class to your building, improving its entire outlook and value. If you hope to sell the building in the future, that feature will attract many buyers. It may not add to the square footage of your home, but itll give you and your family enough room to relax without disturbance.
  • A screened-in deck provides a better shelter against external disturbances like weather conditions and insects. You dont have to cut short spending time in the evenings with your family on your porch because of rain or insect bites. On temperate days, you can enjoy the outdoors and the night breeze.
  • It offers you more privacy from the prying eyes of neighbors and reduces the loud sounds of cars, sirens, etc.
  • It keeps your food safe from prying squirrels or rodents.
  • It provides more space and is a great place to entertain visitors.

You May Like: How Much Does A Patio Roof Extension Cost

Average Screened In Patio Cost

To add a new screened-in patio from scratch, youll pay an average price of $30-$120 per sq ft, depending on materials. On the other end of that spectrum, a DIY screened-in patio with a roof can be as low as $10-$15 per sq ft.

The variety of patio enclosure options with prices averaging:

National Average Price: $13,200

Average Range: $8,000 to $18,800

Buy A Patio Umbrella Screen

Building a Deck With a Screen Porch – PART 1

Before we get into screening off large areas of your deck, we wanted to mention umbrella screens. These are cheap and may work with the deck furniture you already have.

A patio umbrella screen could be a good solution if you dont spend much time on the deck during seasons where bugs are out or dont have many people.

Don’t Miss: How Long Does A Metal Roof Last In Texas

Install The Front Corners

Install the front corner posts and secure them with temporary diagonal bracing. Then fit the upper horizontal 2x6s into the post notches and secure them with one screw at each joint. Measure diagonally from corner to corner on all four sides, and move the temporary bracing as necessary to ensure that all the sides are square, and all posts plumb.

Screen Patio With Roof Installation In Cayman Islands

Are you pondering to expand your home and create a wonderful outside space that you can use in all the seasons? If yes, then consider installing a screen patio. The screen patio with roof installation in the Cayman Islands provides you a chance to enjoy the blissful time with your family by offering you an unobstructed view of the outdoors.

At Ishmeal Shutters, we use lightweight aluminum screens to build the shutter rooms that provide maximum visibility and are strong enough to deter the rough elements and resist sagging and corrosion. Whats more? All our screen rooms are convertible, in case you decide to upgrade in future. Contact us to enjoy the fresh air without being bothered by the insects and mosquitoes.

Recommended Reading: How Do You Know When To Replace Your Roof

Selling Your Upgraded Property

If you consider remodeling your current patio area or installing one from scratch, one of the most important things you must consider is the screened-in patio cost. You will want to get at least 3 estimates. Make sure they are reliable and ask for references before hiring them.

If you decide that you want to sell your home in the future, reach out to UpNest, which is owned by parent company, to find an agent that can help you get the most ROI on any renovations youve done on your home.

What You Have Below & Above

Lovely, forever classic, traditional screen porch with Chippendale ...

When enclosing a patio, you also need to consider the materials below or above you. For instance, if you live on the ground floor, youll likely use the foundation to support the added weight of the enclosure.

Additionally, a ground-floor house has strong floor tile. Hence, it will effectively support a patio enclosure.

Nonetheless, if you live in an upper-floor house or a cantilevered deck, the design of the house may be insufficient to support a patio enclosure.

Enclosing a patio will require you to introduce windows, walls, and extra pressure on the floor. Therefore, you need to consult with your structural engineer if enclosing such a patio is feasible.

Recommended Reading: Can You Put Elastomeric Roof Coating Over Shingles

Patio Roof With Sleek Design

Sleek design has always provided clean and modern look to any buildings including a patio. Therefore, if you want your patio look modern, you need to install a sleek patio roof.

This patio roof is installed for the aesthetic purpose. It does not cover the patio completely which allows rain drops on this dining table. However, it does complement the house very well.

Install One Framing Post In Each Deck Corner:

Youll need more posts if the area is large. For the posts to be solid, install metal post holders on the deck before putting the posts into them.

Attach the posts to the existing house wall using big lag screws. Next, nail a 2 x 4 or 2 x 6 header on top of the posts. The length and weight of the side and the way you want to install your screen will determine whether youll add a bottom plate and a 2 x 4 part at the top. To add more support to the header, you can cut notches in your posts.

You May Like: How Do You Install Roll Roofing

Clean Underneath The Roof

For this, youll have to start by cleaning the inner side of the roof. This is applicable only when the aluminum roof is already installed.

For the cleaning, you can use a light acid cleaner and scrub it clean. Another option is making a DIY chlorine solution. Add one tablespoon of chlorine bleach to one gallon of water and mix.

Or you can use aluminum roof cleaners bought from the market.

Bolt The Frame Together

Building a Deck and Screen Porch PART 2 – Framing and Sheathing the Roof

Lag-bolt all the framing members securely together with two 3/8-in. x 4-1/2 in. lag bolts at each joint. Predrill 3/16-in. pilot holes into the posts to prevent splitting, then 3/8-in. clearance holes in the horizontal members. Countersink the washers and bolt heads. Begin your screen room framework assembly by notching all the 6×6 and 4×6 vertical posts to receive the horizontal framing members .

To obtain the necessary span strength, we used a pressure-treated 1-3/4 x 12-in. laminated beam at the peak , which youll probably have to special-order at a full-service lumberyard. Mount the laminated beam to the notches in the two rear vertical posts with lag bolts. Use washers, and countersink the washers and the lag bolt heads. Tack sill seal1/2-in. thick foam strips to block bugs and water dripsto the back of the posts and beam. Then raise the assembly in place, dropping the posts onto the drift pins. Hold the posts in place with temporary 2×4 diagonal braces.

Raise the two front corner posts into position, fitting them onto the drift pins. Hold the posts plumb, and secure them in position with temporary diagonal bracing, as shown in Photo 6. Then install the upper horizontal 2×6 framing members, and temporarily fasten them in place with one screw at each joint. Note that the front upper horizontal 2×6 is notched into the posts the upper horizontal 2x6s on the sides are flush-mounted to the posts.

Read Also: How To Install Rubber Roofing

Privacy & Added Security

A patio is an area to relax after a hectic day at work or during the weekend when youre chilling out.

Therefore, having security while at the patio is paramount. Enclosing it ensures a private setting despite being outside the house.

It also shields off bugs and mosquitoes that could destroy the patios tranquility.

Construct A Jig To Assemble The Roof Trusses

Prime Before Painting.

Prime and paint the truss parts, wall frame and screen stops before assembly. Prime the wood with a special stain-blocking primer such as Zinsser’s oil-based Cover-Stain. Then brush on a coat of acrylic exterior house paint. Make sure to prime every cut end as you work otherwise, these areas will absorb moisture and cause staining. We prefinished the roof boards with an oil finish .

How to construct the roof truss jig:

It’s easiest to assemble the roof trusses first, using the deck platform as a work surface. Screw two sheets of plywood to the decking and use the dimensions in Figure J to chalk lines indicating the top of the rafters and the bottom of the 2×6 crosstie. Cut triangular blocks and screw them to the plywood to hold the rafters in alignment as you assemble the trusses.

Recommended Reading: How Much Do Concrete Roof Tiles Cost

Make The Patio Roof A Little Bit Higher

It is almost similar to the first method, but to make the patio roof a little bit higher, you will need to remove the house gutter and place the back channel a bit higher.

Because the gutter is removed, you will need to install transfer flashing from the roof of the house to the patio. It allows you to add over a hundred millimeters of extra height.

How Much Does A Screened In Patio Cost

Pin on Roofing Styles

If youre tired of facing the elements or being bitten by bugs in your backyard, you may start looking at how to screen in your patio area. Your next logical question would be how much does it cost to screen in a patio? The cost can be as little as a few hundred dollars for a simple screen DIY job to more than $40,000 for a state-of-the-art enclosure.

These cost estimates also depend on whether you have an existing patio or if you plan to hire a contractor to build one from scratch. The size and materials used for the screened in patio will greatly affect the price as well.

Lets take an extensive look at a screened-in patio cost, and the factors that affect the price.

Patio Enclosures Come in a Variety of Styles.

  • Encircle the area with curtains or screens to create a screen room, free from bugs.
  • Surround the patio with glass from ceiling to floor, called a Sunroom, or panels that can be retracted to accommodate Spring to Autumn.
  • Add an air conditioning system to the three-season room to make it an all-season space.
  • Surround the patio with panels and a roof made of glass to create a solarium.

Don’t Miss: How Much For Roof Inspection

Japanese Style Patio Roof

This patio roof conjures up images of Japanese houses. The wooden posts support the exposed beams that overhang a little bit.

The latticework allows natural light to pass through so that you will be covered partially. The lanterns hanging over the green couches accentuate the Japanese style of this patio.

And to make it look like a Japanese traditional house, some bamboos are grown next to and in front of the patio.


  • The latticework does not completely block the natural light so that it can still pass through the patio roof.


  • The roof cannot protect you from the rain.

Attach The Fiberglass Batts

After youve patched up the roof properly, its time to attach the fiberglass batts. You can Connect them using insulation adhesive or duct tape. This will hold them in place.

Make sure to add them with about ½ inch or ¾ of an inch space in between. Because if these glasses are close to one another, the insulation capacity might be reduced.

Make sure not to use nails for this process. As this might penetrate through the roof!

You May Like: Can You Get A New Roof In The Winter

Screened In Patio Overview

Our 14 x 16-ft. enclosure is a big project, but its the best of any do it yourself screen porch kits around! Although its fairly simple structurally, it requires careful work with a lot of large-dimension lumber. The trickiest part is getting all these components square and plumb, which probably calls for more than a beginners skills. And youll spend a lot of time buildingtwo or three weeks going at it full time, or much of a summer in your spare time.

We built our screen room roof high enough to preserve a pleasant view through the sliding doors. In summer, the awning top shades the bright sun, yet allows plenty of light to pass into the house. And heres the biggest selling point for this project: You can easily remove the awning in winter and let the sunshine in. The structure is designed to look good even without the awning top. Of course, you could leave the awning on all year in many parts of the country, but it wont support a heavy snow load.

The awning is attached as shown in Fig. E and Photos 15 and 16. A slide-in channel at the peak and turnbuckle clips along the edges make for a quick, no-hassle on-and-off in spring and fall. The approximately 16 x 16-ft., one-piece, vinylized canvas weighs only about 10 lbs., so its easy to handle.

We had our screen room awning top made by a professional awning maker, who also handled the initial installation. As an alternative, you can also consider metal or plastic roof panels, which are sold at most home centers.

Use A Screened Pool Enclosure Over Your Deck

Patio Roof & Aluminum Patio Cover with Screen Walls – Venetian Builders

If seeing the stars at night and having your screened room attached to your house is essential, a screen pool enclosure may be the right option.

These are very popular in the American south, especially in Florida. They are large, aluminum or steel-framed structures with screen panels throughout.

Some of the best features of these screen over tents include:

  • Open to the sky to allow sun and starlight through
  • Robust enough to withstand winds and storms
  • Do not need to be taken down each year
  • Paneled screens allow for easy repairs

These can be made in just about any shape or size to fit your needs, as both stock and custom models are available.

But, their solid build and beautiful appearance do come with a cost. In Florida, estimates run between $7,000 and $10,000 for a typical pool enclosure.

Also Check: How To Remove Mold From Roof Tiles


Most Popular