How Much Does Rubber Roof Cost Per Square Foot

Flat Roof Extension Cost

An extension can be done for many reasons, including homeowners who want to add or expand their kitchen, office, bedroom, or another area of their home. The cost will vary depending on the size of the extension. However, most homeowners can expect to pay somewhere between $1,000 and $20,000.

Not a real zip code.

Frequently Asked Questions About Epdm Roofs

Still have questions about EPDM roofing? Youve come to the right place! In this section, weve answered some of the questions were most frequently asked about this material. Take a look and see if we answered your question. If you have any more questions, please feel free to schedule a free consultation with one of our roofing experts!

How Much Does Home Depot Roofing Cost Per Square

A recent quote from Home Depot for replacing a 2,000 square foot roof with a new asphalt roof was $21,481 which is $1,074 per square, or $10.74 per square foot. Another quote from Lowes for a 1,650 square foot home was $16,800, which is $1,018 per square or $10.18 per square foot. Both houses had a pitch in the region of 5/12.

Also Check: What Color Of Roof Shingles Is Best

How Do You Maintain A Flat Roof

The cost to seal the roof surface is $400 to $1,800 but its well worth the expense. The sealant creates a thick barrier that makes all the rest of your maintenance tasks a breeze. With that done, you just have to keep the gutters and surface clean plus check the flashing often for damage.

Clear the gutters after storms or at least every six months. Homes with many pine trees nearby may need their gutters cleaned every four months. In addition, its important to sweep off the roof periodically. Flat roofs are much more likely to collect leaves, dirt and other debris that can accumulate in piles and trap standing water, resulting in leaks.

Finally, be sure to inspect the flashing around chimneys and other roof joints for cracking. Apply caulk to the cracks or replace pieces of the flashing if necessary to prevent leaks.

How Do You Repair Rubber Roof

• How to Patch a Leaking RubberRoof. Use a 3-inch paint roller to apply rubber-to-rubber contact cement to one half of the outlined repair area, and to one half of the underside of the rubber patch. Wait about 10 minutes for the cement to dry. Set the rubber patch into place, aligning it with the outline marked earlier onto the roof.

Related

Also Check: How Do You Put A Tarp On A Roof

What Type Of Flat Roof Is Best

EPDM Membranes Quite possibly the best flat roofing membrane, EPDM is a relatively low-cost flat roof material that offers a number of significant advantages. Clean, straightforward installation, incredible strength, a long lifespan, and a smart finish combine to make EPDM membranes a difficult one to beat.

Rubber Shingles And Roofs

Rubber roofing provides a budget-friendly option for roofing shingles that are eco-friendly, durable, and available in various designs and colors. Such roofs are resistant to cracking, rotting, discoloration, denting, mold, and moisture absorptions, and most manufacturers offer a warranty for at least thirty years.A rubber roof is built with affordable recycled materials and can also help you to reduce the energy bill due to the insulating capabilities of rubber. In addition, if your rubber roof begins to leak, most of the time, it can be fixed with a fresh application of a strong sealant, a simple repair, or the replacement of a few shingles.These features combined with the ease of rubber roof installation, low maintenance, and the variety of available styles and colors, make rubber roofing an excellent option when the time comes to put a new roof on your home. Energy efficient Usually a 30-year manufacturer warranty

• Rubber Roofing in Toronto GTA
• New Rubber Roof
• Rubber Shingles Roof in Toronto

Read Also: How Do You Repair A Shingle Roof

Cost Of Flat Roof Tear Off

When replacing a flat or low slope roof, building code in most states limits you to no more than two layers of material. For example, if you have EPDM rubber now, you may put on a new PVC or TPO membrane.

On the other hand, if you have Modified Bitumen or gravel and tar, with rubber on top, you need to remove the rubber roof. Removing EPDM or another single ply membrane is simple and relatively inexpensive.

To tear off one layer of membrane costs $0.45 per square foot, and two layers costs $0.60 per square foot. Thus, tearing off 1,600 of single ply roofing will cost you $720 960, depending on the number of layers being taken down.

However, if you need to tear-off Tar + Gravel of multi-layer rolled roofing, the cost will go up significantly. One layer tear off runs about $1.5 per square foot, where as two layers costs $2 per square foot.

You will pay $2,400 3,200 to remove an old tar roof from your house. Its so expensive because rolled roofing is very heavy, many dumpsters need to be ordered, and it can only be removed using special equipment.

Our roof estimator takes tear off costs into consideration when calculating your price quote. Make sure you select an appropriate number of tear-off layers to get an accurate quote.

How Much An Epdm Rubber Roof Costs To Install And Repair

Ethylene Propylene Diene Monomer roofing is a single membrane roll or sheet of rubber material typically used on roofs with little to no pitch. The material has a wide variety of uses, and as a result, there are many variables when it comes to how much an EPDM roof will cost you.EPDM is a durable and affordable low-pitch roofing option. EPDM material costs can range from $3 to $12 per square foot but are usually around $4 to $6.50. The cost of EPDM installation adds another $1.50 to $3 per square foot. For a 1,500 square foot roof, expect to pay between $8,000 and $22,000. The price range for an EPDM roof is incredibly vast due to various factors such as the cost of materials, adhesive, labor, equipment, and many other things. Letâs take a more in-depth look at your options when it comes to EPDM rubber roofing to help you more accurately price out your roofing project.

Recommended Reading: How To Install Kitchen Exhaust Vent Through Roof

Get Started On Your Flat Roof Replacement

Now that you have a good understanding of flat roof costs, its time to get started on your own project. At Legacy Service, we provide roofing installation and replacement services to homeowners throughout southeastern Pennsylvania, New Jersey, and Delaware.

Posted on May 7, 2022 in Roof

Read our news

HOW LONG SHOULD A ROOF LAST?ELEMENTS

A lot of elements play a role in maintaining the integrity of the roof, but as a homeowner, the most important components to pay attention to are the underlayment, ventilation, and material.

Diy Flat Roof Replacement Vs Hire A Pro

You should only attempt a DIY flat roof replacement if you have the time, tools and experience to get the job done right. Otherwise, leave it to the professionals since they can open up your roof without causing damage. They are also skilled in laying down the roofing materials so that they wont leak in the near future.

Just make sure to find a licensed, bonded and insured roofing contractor with a great track record of success. Get quotes from at least three flat roof contactors near you to weigh your options. Youll want to speak with their references and check out pictures of their past projects before selecting the best one.

Recommended Reading: How Much Are Roof Replacements

Contact David Maines For Your Commercial Roof Replacement

The number of commercial roof replacement costs to consider may seem overwhelming. You need a roofing contractor who will work with you to help you understand each charge and provide you with the highest-quality roof replacement within your budget.

David Maines has been a trusted leader in commercial roofing replacements throughout Central Pennsylvania and surrounding states for the past 28 years. With our unique knowledge and dedication to commercial structures, were prepared to guide you through each step in the installation process. And with our free estimates, youll know exactly what youre paying for before your installation.

If youre ready to work with a roofing service provider trained to meet your unique needs and understand your budget, contact us today to schedule your consultation.

Roof Repair Vs Replacement

Your roof could still be in good condition, and not show any signs of leaking, but if it is 20 years old or older, you can prevent an extensive amount of damage to the interior of your home and its contents by having someone come out to assess the situation. According to building supplies manufacturer Owens Corning, the following is a list of signs you’re roof needs to be replaced:

• Shingle edges are curled, or shingle tabs are cupped or cracked.
• Bald spots where granules are missing
• Your roof is at least 20 years old.
• The roof looks old and worn.
• Dark streaks from airborne algae
• Moss

Recommended Reading: How To Waterproof Concrete Roof Deck

How Much Does Rubber Roofing Cost

On average, you can expect rubber roofing shingles to cost $4.25 to $8.25 per square foot. Other factors that could raise the cost of your roofing replacement include: thicker roofing material, high-quality underlayment or insulation, repairs, or an extended warranty agreement.

The installation of rubber roofing is easier and quicker than other materials. The rubber is also lighter in weight, which makes it easier to deliver to your home.

Rubber roofing will most likely cost more than asphalt roofing, but less than metal, slate, clay, and other premium types. Before you go with asphalt due to the low price, remember that the quality and performance is one of the highest for the price.

Rubber roofing has to be properly installed in order to offer all of the typical benefits. Keep this in mind if you are considering handling the project yourself. Though the investment may be less daunting with DIY work, you may ultimately waste money on repairs or on home damage. Protect the investment of your new roof and this project by hiring someone who knows the ins and outs of rubber roofing installation.

We suggest speaking to a local roof installer to see if a rubber roof is the best roof type to install for your home.

Find Local Pros

Are Rubberized Shingles Worth It

Hurricane-Grade Performance. When installed correctly, rubber roofing material is incredibly strong and can withstand wind uplifts of up to 110 mph. … As a result, they are an excellent option for hurricane or storm-prone states, as the shingles will survive strong storms with heavy winds.

Related

Also Check: How To Get Your Roof Fixed For Free

How Much Should A Flat Rubber Roof Cost

The average range of cost to install or replace a rubber roof is between $6,000 and $18,000, with the average being around $12,000. And as you know, all sorts of factors come into play that can affect that price, such as the materials, labor, obstructions, and customizations of the roof. Cost Per Sq. Ft.

Are Rubber Roofs Any Good

Rubber roofing is suitable for extreme conditions, giving you one of the most durable and reliable roofs available that typically lasts between 30-50 years. In time, you may find a felt flat roof can pick up moss and algae the synthetic rubber doesnt support the growth of moss so you are guaranteed a clear roof!

Read Also: How Much Does A New Roof Cost In Utah

Epdm Pricing And Value

EPDM is the least expensive of the three primary membrane types, but it isnt cheap. The material is very durable.

Since the early 1960s, EPDM has been the material of choice in canals and other irrigation systems prior to becoming a successful material for waterproofing roofs.

Its estimated to have 1 billion square feet of EPDM rubber membranes installed throughout the worlds roofs. This is partially due to its relative durability, ease of installation and its competitive pricing.

Average Cost Per Sq. Ft. Installed

On the low-end, you can plan to spend around $4.50 to $7.50 per sq. ft. for the installation of an EPDM rubber membrane on a low-sloped or flat roof. The low-end pricing, although not very common, would be on par with asphalt shingles pricing, which tells you how affordable it can be.

A range of $8.50 to $14.50 per sq. ft. installed would be the high-end pricing for residential flat roofs. This would likely be for a thicker or solar-reflective rubber membrane, with the job done by highly-experienced residential/light commercial flat roofing specialists.

What about DIY for EPDM?

The DIY approach is viable, because installation is not complicated. With TPO and PVC roofs, you need special skills and tools like hot air welders for proper installation.

The reality is EPDM roofs last 7 to 15 years on average before requiring a replacement or resealing .

Bay Window Roof Replacement Cost

To replace a bay window roof with architectural asphalt, you can expect to spend $398 for a 12 square foot perch.A typical bay window is 7 feet wide, and your bay window roof will extend 24 from your wall. Add another 6 inches for the roof to extend over the front of the window. The chart below shows the price for architectural asphalt shingles, clay tile, and copper roofing.

Bay Window Roof Replacement Cost

• Pay for permits

Read Also: How Often Should A Shingle Roof Be Replaced

Do Rubber Roofs Crack

Pro: No Blistering, Cracking or Rotting!

Due to its natural properties, once installed, the rubber will be completely resistant to blistering, cracks, and any rot. This gives EPDM rubber roofing many further advantages to other types of flat roofing and gives you as the customer fewer things to worry about.

Hiring A Roofer: Checklist

When hiring a roofer to install EPDM rubber on a flat roof, there are a few things you should watch out for:

• Search the Competent Person Register for local authority approved tradespeople.
• Ask if they have references from previous jobs.
• Does the roofer belong to one of the UKs roofing trade associations? Look out for the National Federation of Roofing Contractors and The Liquid Roofing and Waterproofing Association . Trade associations members follow the industry best practice guidance, have relevant trade insurance and work professionally.
• Ask for at least three quotes from the shortlist of contractors.
• No one can quote over the phone without visiting your property and inspecting the job. Therefore, insist on an inspection, and a quote based on the roofs condition.
• The cheapest quote might not always be the best. Therefore, try to choose one with a price somewhere in the middle.

Read Also: How Long Does An Asphalt Shingle Roof Last

What Is Epdm Roofing

Ethylene Propylene Diene Monomer is a type of roofing material thats used for flat roofing systems. Homeowners may not choose it for aesthetic purposes, but its practical and durable, and it will certainly get the job done in terms of protecting your property from the elements. It can be used for both residential and commercial structures that have low slopes.

EPDM flat roofs are designed to last about 25-30 years. Theyre lightweight, flexible, and have high resistance to wind, hail, extreme temperatures, thermal shock, UV radiation, and more. If youre interested in EPDM roofing installation, please feel free to get in touch with our team of experts.

Do Flat Roofs Leak More

Just like any roof, a flat roof will develop leaks, but since its flat, the water doesnt have anywhere to go but straight down. This means that moisture can seep into the roof itself and cause problems that may lead to mold and fungus. This may cause water to pool in divots and dips in your roof.

Don’t Miss: How To Install Snow Rails On A Metal Roof

Energy Efficient Rubber Roofs

Rubber roofing shingles consist of up to 95% recycled materials, including recycled rubber and a number of other recycled materials, such as plastic and slate dust. Additionally, used shingles can be melted and recycled into a new product. Rubber roofing is available in a number of different colors and styles, so you dont have to feel limited by the dark gray shade that is usually associated with rubber. In fact, if you live in a warm climate, investing in white-on-black rubber roofing can help increase energy efficiency as it is highly resistant to UV rays and absorbs heat.

Where To Use Epdm

EPDM roofing systems are considered to be the ultimate weather protector. They provide protection from wind, rain, hail, sunlight, and extreme temperatures. If you have a flat or low slope roof that cant be seen from the ground and needs plenty of protection, this type of material is highly recommended. It may not be pretty, but it does its job.

On rooftop decks, EPDM can be covered with a wood deck, outdoor carpet, or Astroturf. It can also be painted with Hypalon paint, but it will have to be repainted every three or four years. If youre looking for EPDM roofing contractors near me, please feel free to contact us at any time.

Read Also: How Much Dies A New Roof Cost

How Does Tpo Roofing Lower Energy Costs

Energy conservation is one of the biggest benefits of TPO roofing. Because the material is white and the surface is smooth, TPO roofing is highly reflective. That means when the suns UV rays hit the roof, the heat is deflected away from the building rather than absorbed by it. This helps lower your A/C costs. There are other types of rubber roofing that serve to absorb the heat with their dark colors, like EPDM roofing.