Cost To Convert An Evaporative Cooler To Refrigerated Air
One of the downsides of swamp coolers is that they are only really efficient in low-humidity, dry areas. So if the humidity levels rise, swamp coolers become nearly useless. Fortunately, there are ways to get around this issue, and one option is to convert your swamp cooler to refrigerated air. This turns it into an air conditioner unit, helping to keep your home cool even on the warmer, wetter days.
The costs for this process vary enormously, based on a range of factors. Experts usually need to come out to your home and investigate your ductwork to see if it can handle the switch to refrigerated air or needs to be adjusted. They also determine if your electrical system can cope with the added energy usage of an A/C unit. Your furnace or heating system may also need to be upgraded. On average, expect to pay between $3,000 and $7,000 for this conversion, but the price can go well beyond these amounts.
Additional Considerations And Costs
- Replacement pads. Replacement pads need to be purchased regularly for your cooler. This may need to be done annually or every few years, depending on the type of pad you have and how quickly they are used up. Always check the instruction manual to know what type and size of pad you need.
- Ice. Putting ice into your swamp coolers water reservoir helps increase its cooling potential but not by much. You will feel a slight increase in cold air, but the cooler does not suddenly start working faster, and the difference is not big.
- Open windows or doors. Evaporative coolers need open doors and windows to function properly because they aim to replace the warm air in your home with cooler air, and the warm air needs a way to flow out of the house. In each room you want to cool, open a window or door slightly.
- . In general, swamp coolers start being less efficient as the temperature approaches 75 degrees Fahrenheit. Once it goes under 75 degrees and especially below 70 degrees, your cooler does not have much of an effect. Humidity can have an impact on this because swamp coolers stop working sooner in more humid places.
How Does A Swamp Cooler Work
take advantage of the natural process of evaporation. This process for home and room cooling goes back to the days of Ancient Egypt when people hung wet cloths over the doors of their homes. When hot, dry air passed over those cloths, it cooled the area down. The same basic idea is used in swamp coolers, which usually feature a fan that draws hot air from outside. That air then passes over a set of damp pads inside the cooler, where the evaporation occurs as the water absorbs the heat. The cooler, moister air is then blown out of the units front into the room or space you are attempting to cool down. Swamp coolers can be used indoors, if they have access to a window or opening to suck in hot, dry air from outdoors, and semi-outdoor locations like garages with the doors open.
Read Also: Do Roofing Companies Offer Payment Plans
Roof Mount Swamp Cooler:
The swamp cooler can lower the temperature of your home by 15 to 40 degrees Fahrenheit. However, the machine wonât work if your home lacks enough windows to circulate air. A Roof Mount swamp cooler provides a constant stream of fresh air, which is why windows should be opened.
According to the United States Energy Department, an effective system should be able to change the air inside of your space at least 20 to 40 times per hour. It will be necessary for the swamp coolerâs engine to be sized according to your home size, which will determine how large the unit can be and, of course, how complicated the installation is.
Evaporative Cooling Pads Price
Swamp coolers work by passing air over damp pads inside the cooler units. There are different types of pads, and they may need to be replaced over time.
Aspen pads, also known as fixed fiber pads, are among the most common. They cost around $25 to $50 per pad and are made from aspen wood fibers. These pads need to be changed yearly.
There are also Cellulose pads, which are more durable and usually last three to five years before requiring replacement. Cellulose or CelDek pads, which are essentially the same thing, cost around $50 to $80 on average.
Your unit may also have rotating pad, which gradually rotate inside the unit as they cool down. The benefit of these rotating systems is that they do not need a . The pads last around two years on average, costing about $50.
A good way to maximize your cooler pads lifespan is to use a quality water source that is low in minerals, like filtered rainwater. This reduces the risk of mineral deposits building up on your pads.
Consider shutting down the system when not needed. Also, follow all user instructions and clean the water tank when setting the cooler up each season. If the cooler manufacturer recommends it, you may want to use water treatment tablets.
Don’t Miss: What Size Lumber For Roof Rafters
How To Install Swamp Cooler Ducting
Most homeowners with a desire, common sense, good hands, and a basic set of household tools could install swamp cooler ducting. It is necessary to understand duct installation, plumbing, and basic 110-volt electrical knowledge.
As shown, most houses have a typical attic. Attics can be suffocating. The less work done in the attic, the better it is. The majority of the ductwork can be planned ahead of time, prepared on the ground, and then either lifted from the diffuser location inside or dropped down from the roof. A good, strong set of teenage arms comes in handy here.
Tips To Buy An Evaporative Cooler Roof Mount Kit:
If youre looking for an evaporative cooler roof mount kit, there are a few things you should consider before making your purchase.
- make sure that the kit is compatible with your evaporative cooler model.
- make sure that the kit includes all of the necessary parts and hardware for installation.
- check to see if the weatherproof shroud is included in the kit. This shroud is important because it will help keep moisture from building up around the fan and motor, which could cause damage to the cooler.
- Finally, make sure that you understand the instructions that come with the kit, so that you can properly install it.
Follow these tips, and youll be able to find the perfect evaporative cooler roof mount kit for your needs. With the right kit, youll be able to enjoy cool, comfortable air all summer long.
Also Check: How Do You Figure Square Footage Of A Roof
Cost To Install Evaporative Cooling
These estimates are for BASIC work performed in serviceable conditions by qualified trade professionals using MID GRADE materials. Work not mentioned on this page and/or work using master craftsman, premium materials and project supervision will result in HIGHER COSTS! Explore the full range of evaporative cooling system new installation labor options and material prices here.
These estimates are NOT substitutes for written quotes from trade professionals. Homewyse strongly recommends that you contact reputable professionals for accurate assessments of work required and costs for your project – before making any decisions or commitments.
The cost estimate includes:
- Costs for local material / equipment delivery to and service provider transportation to and from the job site.
- Costs to prepare the worksite for Evaporative Cooler Installation, including costs to protect existing structure, finishes, materials and components.
- Labor setup time, mobilization time and minimum hourly charges that are commonly included for small Evaporative Cooler Installation jobs.
The cost estimate does NOT include:
Drawbacks Of The Evaporative Cooler Roof Mount Kit:
- The main drawback of evaporative cooler roof mount kits is that they can be quite expensive. Many people are not willing to spend money on one of these kits, especially if they do not live in an area where the temperature gets very hot.
- Another potential downside is that some people find that the installation process can be somewhat difficult.
- if the cooler is not installed correctly, it could potentially leak and cause damage to your home. Overall, however, evaporative cooler roof mount kits offer a great way to keep your home cool during the summer months.
evaporative cooler roof mount kit
Also Check: How Much Will It Cost To Roof My House
Open The Window And Install The Unit
A swamp cooler is designed to be easily mounted in a window that is opened vertically. If possible, the window should remain open. With the helper, this can be achieved. The cooler will be more efficient if the window is always open, increasing the flow of air to the cooler.
“Swamp Cooler Installation””How To Install An Evaporative Cooler”
Swamp Cooler Installation In The Wall And The Roof is not much complicated, but there are few basic and essential points that you should keep in mind.
Evaporative Cooler Roof Mount Kit
Hi, Im Alex and I love to share my experience and suggestions to manage the humidity levels in any area, maybe its your home. I…Read more
The evaporative cooler roof mount kit by Coleman is a great way to install your evaporative cooler on your roof. The kit includes all of the necessary parts and instructions to make the installation quick and easy. The included hardware is made from durable materials that will last for years.
With this kit, you can cool your home during the hot summer months without having to use expensive air conditioning. Order yours today and start enjoying the benefits of an evaporative cooler!
Recommended Reading: How To Afford A New Roof
Swamp Cooler Pros And Cons
Swamp coolers are a popular alternative to traditional home air conditioning units. Some of the most significant swamp cooler benefits are their low energy consumption, their ability to reduce your homes temperature effectively, and their fairly straightforward maintenance requirements.
Swamp coolers are also known for their low annual cost, particularly compared to classic home AC units. Swamp coolers only use around ¼ of the electricity that a classic home AC unit uses to function, making it an economical choice with a comparatively low energy bill.
That being said, a few key drawbacks of swamp coolers are their lack of effectiveness in very humid climates or climates above 95 degrees, their tendency to leak, and their propensity to age a roof. Because swamp coolers are often installed in ducts on the roof of a home, the roof can be easily damaged or stained if water leaks from the swamp cooler. This tendency means that homeowners with swamp coolers are more likely to have to invest in roof repairs than those with traditional home AC units.
Portable Swamp Cooler Cost
One of the cheapest options when buying a swamp cooler is a portable, freestanding unit. They are affordable, costing between $150 and $1,500 on average. These swamp coolers offer the advantage of being compact, lightweight, and easy to move around from room to room. They are less powerful than whole-home ground or roof-mounted units and are only really useful for cooling down individual rooms or semi-outdoor spaces.
You May Like: How To Fix A Leak In A Trailer Roof
Why Should You Install A Swamp Cooler On A Roof
If you have no prior knowledge about swamp coolers and their functions, installing one on a roof may seem a bit odd.
But, trust us when we say that roof-mounted swamp coolers are the most commonly used swamp coolers. This is because they are more efficient.
Moreover, you dont have to design new duct systems to allow the flow of air into the rooms.
Rooftop-mounted swamp coolers are not so expensive to install.
Check out this video below for an actual tutorial on how to install your swamp cooler.
Winterizing Your Industrial Evaporative Cooler:
If you want to prevent your cooler from rusting, turn off the water supply, rinse the water pan, and remove all the dirt, minerals, and other particles accumulated in it over the winter. The winterization of the swamp cooler will prevent your cooler and maintain its efficiency and enable you to save on maintenance after the winter.
Recommended Reading: Do Solar Panels Reduce Roof Temperature
Swamp Cooler Installation Tips
Your evaporative cooler will need to be installed outside of your home. It can be installed in various locations, depending upon the type of cooler chosen. The three types of coolers are:
Roof mounted are the most common, although they are more difficult to maintain.
Figure 1: A typical down-draft swamp cooler
Figure 2: A typical side-draft cooler.
Mounted coolers are connected to ducts that bring the cooled air into the rooms of your home. In some cases, existing ductwork is used to move the air to the various rooms. Roof mounted systems are often the easiest to connect to existing duct systems. Alternatively, ductwork can be designed specifically for an evaporative cooler to channel the air into the rooms of your the home. This will depend on what type of system that you are installing. The three systems are:
- Stand alone evaporative coolers
- Stand alone alternative to a refrigeration system
- Combined system
The only problem associated with the combination system is that refrigeration ducts are often too small to move the amount of air required by evaporative coolers. This causes less airflow and more noise. Also, combined systems require that a damper be installed to separate the units. Otherwise the refrigerated air will escape through the evaporative cooler and the moist air will corrode the refrigeration system. In smaller, open homes, cooled air can be blown into a central location without ductwork.
Recommended Reading: How Often Do I Need To Replace My Roof
What Size Evaporative Cooler Should I Buy
To figure out how large an evaporative cooler you need, check the cubic feet per minute rating. This is the cubic feet per minute the unit can cool. Calculate the minimum CFM you need by determining the cubic feet of space you want to cool and multiply that total by the number of times you want the air to turn over in an hour.
The American Society of Heating, Refrigerating and Air-Conditioning Engineers suggests from five to nine air changes an hour for residential rooms. Then divide that total by 60 . The result tells you the CFM rating you need. Some models also list a square foot rating, which is less precise but still helpful when choosing the right cooler for your space.
You May Like: Do I Need A Permit To Replace My Roof
Also Check: How Much Does A Flat Roof Cost To Replace
Evaporative Cooling Prices By Type
There are two main types of swamp cooler: indirect and direct. They work in slightly different ways and are installed differently. Indirect air coolers always need to be mounted, but direct air coolers may be mounted or used portably. The table below shows average price ranges for each type:
|Type of Evaporative Cooler|
|$1,500 – $6,000|
Choosing A Site For Installation And Preparing It:
The unit duct is installed in the roof and connected to the interior ductwork, if applicable.
The unit must be assembled, level, and mounted in place.
Set up the water supply and connect it to the existing electrical system.
Additionally, a professional will leave your unit looking sparkling after theyâve finished cleaning it up. As a result, you can enjoy an energy-efficient unit that uses about 75 per cent less energy, according to the US Energy Department.
Read Also: How To Calculate Shingles Needed For Roof
Connect The Motor And Fan
After you have installed the unit in the window, you need to connect the motor and the fan to the coolerâs body. Your swamp cooler will function better if your motor can pump sufficient water to it, so you choose a motor with a high horsepower rating.
Install a fan that can properly move the air outside of your room so that your cooler will be done correctly and efficiently
Existing Conditions And Accessibility
If youre installing a ground- or roof-mounted evaporative cooler, youll need to tie it into the ductwork. If your home doesnt have existing ductwork, a pro will need to install it at a cost of approximately $10 to $20 per linear foot.
The evaporative cooler installation cost can also increase depending on the location. Roofs are generally less accessible to a contractor the added height and danger could mean slower work and a higher overall labor cost.
You May Like: How To Screen In Patio With Roof
Best Roof Mount Kit Mounted Evaporative Cooler:
there are a lot of factors that go into choosing the best roof mount kit for evaporative coolers. Some things youll want to consider include the size of your cooler, the weight of the cooler, the pitch and slope of your roof, and the type of roofing material you have.
That said, here are three of our favorite roof mount kits for evaporative coolers:
1. The Coolerado Roof Mount Kit is a great option if you have a sloped or peaked roof. Its also very lightweight and easy to install.
2. The Air-King Roof Mount Kit is another good choice if you have a sloped or peaked roof. Its slightly heavier than the Coolerado kit, but its still easy to install.
3. The Essick Air Roof Mount Kit is a great option if you have a flat roof. Its very sturdy and can support up to 100 pounds, making it ideal for larger coolers.
Breezair Evaporative Swamp Cooler Price
The average cost for Breezair evaporative coolers ranges from $1,000 to $3,000. With models like the EXT 265 and Icon EXQ 170, Breezair stands out in the evaporative cooler industry. The company produces a wide range of compact yet powerful models while maintaining reasonable Breezair prices. Customers can take advantage of a seven-year comprehensive warranty on Breezair evaporative coolers when they purchase directly from Seeley International. If the customer did not purchase the evaporative cooler from Seeley International, the warranty period is five years.
Don’t Miss: How To Calculate Metal Roofing